Q17 An L4x4x7/16 tension member is connected with %"Ø bolts, as shown in the figure below. Both legs of the angle are connected. If A36 steel is used, what is the LRFD design strength? Neglect block shear, bolt shear, and bearing/tearout. - 6 spaces @ 2"- 22" L4 x 4 x /16 c) 107 kips d) 98 kips a) 108 kips b) 90 kips

Q17 An L4x4x7/16 tension member is connected with %"Ø bolts, as shown in the figure below. Both legs of the angle are connected. If A36 steel is used, what is the LRFD design strength? Neglect block shear, bolt shear, and bearing/tearout. - 6 spaces @ 2"- 22" L4 x 4 x /16 c) 107 kips d) 98 kips a) 108 kips b) 90 kips

Steel Design (Activate Learning with these NEW titles from Engineering!)

6th Edition

ISBN:9781337094740

Author:Segui, William T.

Publisher:Segui, William T.

Chapter3: Tension Members

Section: Chapter Questions

Problem 3.4.6P

See similar textbooks

Similar questions

Fy= 50 Ksi, Fu= 65ksi Select the lightest W10 section available to support working tensile loads of PD= 120 k and PE= 160k. The member is to be 18 feet long and is assumed to have two lines of holes for 3/4 of an inch bolts in each flange. There will be at least three holes in each line 3 in on Center please show steps a indicate if reference material was used so I may know where and how to work it
The vertical steel bar shown is 3/8 in. thick and must be designed to withstand a tensile loadP=28 K. Two A325-X bolts will be used. Assuming A36 material and standard round holes(allowable Fv = 30 ksi), calculate the required diameter d of the bolts. Check for shear only.
Q: Design number of Structural bolts required to hold three plate sections of 12” x 0.5” each. The dead load at the connection is 20 kips & live load is 110. All members are made of A36 steel. Use A325 structural bolts of 0.5” diameter having fv=50 ksi and fu=120 ksi with threads excluded from shear plane arranged with three lines of bolts.
The tension member shown in the figure is connected to a gusset plate as shown with 1.210-inch diameter bolts. It is subjected to the dead and live loads as shown. Take Fy = 33.29 ksi and Fu = 52.93 ksi. Assume Ae = An. a) Draw the critical cross-section and show its dimensions using your data. b) Determine whether this member has enough strength using LRFD and the critical ASCE 7 loading combination.
Select the lightest 28 ft long W12 available to support a factored tensile load of Pu = 400 k. Assume there are 2 lines, (lines are 5” apart) of 7/8" bolts in each flange (4 lines total) and 3 bolts per line @ 4” o.c. and 4” to end. Assume A992 steel. Dimensions are from centers of bolt holes.
The lateral force resisting system design requires a W10 x 45 section. Compute the LRFD design tensile strength and the ASD allowable design tensile strength for the W10 x 45 with two lines of 19 mm diameter bolts in each flange using A572 Grade 50 steel (fy = 345 MPa, fu = 448 MPa). Use the AISC/NSCP Specifications. There are assumed to be at least three bolts in each line 100 mm on center, and the bolts are not staggered with respect to each other. solve the given above and show your complete solution.
An angle of ASTM A36 steel (with Fy=36 ksi) is connected by two-rows of 7⁄8-in. bolts, as shown. It is exposed to a dead load of 20 k, a live load of 40 k. Design a 4 in. size (4×?) member considering the strength of the angle only.
A C12 × 30 is connected with 1-in. diameter bolts in each flange, as shown. If Fy = 50 ksi, Fu = 65 ksi, and Ae = 0.90An, compute the following. a. The design strength for LRFD. b. The allowable strength for ASD.
Calculate the capacity of the shear connection below. A36 Plate: Fyp= 248MPa, Fup= 400MPa. A992 Beam; Fyb= 345MPa, Fub= 450MPa. Fexx= 480MPa. twb= 10.92mm tp= 12, X= 45, nr= 3(no. of bolts) What is the bolt shear capacity in kN? What is the bearing capacity of the shear plate in kN? What us the bearing capacity of the beam in kN? What is the shear yielding capacity of shear plate in kN? What is the shear rupture capacity of the shear plate in kN? What is the block shear rupture capacity of shear plate in kN? What is the weld capacity in kN?
A C12×30 is connected with 1-inch. diameter bolts in each flange, as shown in figure below. If Fy=50 ksi, Fa= 65 ksi and Ae=0.90An. Compute the following. a. The design strength for LRFD b. The design strength for ASD
Two steel plate tension members have been connected using 0.72 inch diameter bolts arranged in an equally-spaced 9 by 3 rectangular formation. Both plates have a thickness equal to 1/3 in. Take shear fracture stress as 51.2 ksi, clear distance for each edge bolt as 0.12 in, and the clear distance for the other bolts as 1.072 in. a)Sketch the connection showing all the details and measurements with units. b)Find the maximum allowable service dead load and live load assuming live load is half as much as dead load. Consider ASD.
Determine the LRFD design strength and the ASD allowable strength, including block shear requirement of the required C230x22 using A36 steel, with 2 lines of 20mm bolts in the web as shown. The steel properties relevant to this problem are: A = 2845 mm2 d = 228.6 mm (from W300x79) tw = 7.24 mm x = 14.9 mm. (Key Answer: Pu=490.40 kN; Pa=326.90 kN)