Q2. (a) You are given the following results from Atterberg Limits testing on a soil sample (PL= 23%, LL = 55%) collected from a boring on a local project site. The soil sample had natural moisture content of 56.3% prior to Atterberg Limits testing. If the soil is fine grained, what is the USCS Group Symbol (refer to Figure 2a) on page 7 for this soil and what does the natural moisture content result tell you about the soil in-situ (i.e. “in place")?

Q2. (a) You are given the following results from Atterberg Limits testing on a soil sample (PL= 23%, LL = 55%) collected from a boring on a local project site. The soil sample had natural moisture content of 56.3% prior to Atterberg Limits testing. If the soil is fine grained, what is the USCS Group Symbol (refer to Figure 2a) on page 7 for this soil and what does the natural moisture content result tell you about the soil in-situ (i.e. “in place")?

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter3: Weight–volume Relationships

Section: Chapter Questions

Problem 3.5P

See similar textbooks

Similar questions

-In this site, SPT test has been used to calculate the properties of soil layers. Mention two other methods that could be used to calculate soil properties and explore two advantages for each method.
FROM THE GIVEN DATA, SHOWS A SIEVE ANALYSIS OF SOIL SAMPLES A, B, AND C. (PLEASE HEEEEEEELP!!!!) A.) Classify the soil sample A using USCS Method. B.) Classify the soil sample B using USCS Method. C.) Classify the soil sample C using USCS Method.
Problem 3. a) Explain the role of optimum moisture content in resilient modulus of soil. b) A summary of resilient modulus test conducted on a subgrade soil, according to the AASHTO T307-99 protocol, is summarized below. Determine the resilient modulus for Sequence No. 8, knowing the average recoverable strain of last five cycles of this sequence is 0.0005. c) Look at image for part C and data
From the given data, shows a sieve analysis of soil samples A, B and C. Classify the soil sample A using USCS method (Group Symbol only), D60=2.3, D10 = 0.17, D30 = 0.70 Classify the soil sample B using AASHTO method Classify the soil sample C using the AASHTO method
Why do we have to trim the soil sample in undisturbed soil carefully using the soil lathe? What are the different laboratory tests for undisturbed soil sample? List them.
True or False? If I am assigned to sample soil for testing, I need to collect samples always at two different depths
Question#1: Explain the Tri axial Shear test in your own words. Question#2: Describe the practical applications of consolidated-drained analysis for clay soil. Kindly solve both questions
A constant head permeability test has a soil sample length in the direction of flow of 350 mm, a sample cross sectional area normal to the flow direction of 125 cm2, and a head loss through the sample of 420 mm. The soil sample is a medium dense sand with a void ratio of 0.61. During a 3 minute test period, 580 cm3 of water flowed through the sample. (a) Sketch the Constant Head Permeameter and label the sketch with the appropriate dimensions given above. (b) Determine the Hydraulic conductivity, k, in cm/sec, and the seepage velocity (not just apparent velocity).
Subject : Geotechnical Engineering Please show me the complete solution with detailed. A soil PSD is given below. The soil fraction passing 425 micron sieve was tested for Atterberg limits and returned a plastic limit of 23% and a liquid limit of 63%. Name the soil according to AS1726-2017.
Laboratory tests performed on a saturated alluvial subgrade soil gave the following information: In situ water content = 11.9%, Specific gravity = 2.65, Soil size distribution: D100 = 51 mm, D75 = 30 mm, D60 = 20 mm, D45 = 15 mm, D30 = 8 mm, D10 = 4.76 mm, D8 = 2 mm, D4 = 0.08 mm, < 2 m = 4% a. Is this soil well graded? Classify it by the AASHTO and Unified systems b. Using the sieve analysis soil data and the classification systems, estimate for a total of 100% the approximate percentages of coarse aggregate (gravel), fine aggregate (sand), silts, and clays?
Geotechnical laboratory tests were conducted to determine the liquid limit of soils. The data set shown in Table1 was obtained by using Casagrande's apparatus on Soil A (Plastic Limit = 32). The data set shown in Table 2was obtained by using Cone penetrometer on a different Soil B (Plastic Limit = 28).Table 1. Data from LL cup testing Table 2. Data from Cone penetrometer(a) Draw the Flow curve for soil A and B.(b) Calculate the Flow Index for both soils.(c) Calculate the Liquid limit for both soils.(d) Calculate the Plasticity and the Liquidity Indices for both soils, if both soils were found to havethe same current water content of 30%.(e) What can be said about the strengths of the soils in their current state?
PROBLEM D Classify the following samples using USCS Method of Soil Classification. Determine the ff: 1. Coef. of Uniformity 2. Coef. of Curvature 3. Soil Classification