Question is a fluid mechanics Question 4а.Explain briefly what is meant by drag and its form.A smooth thin plate 5 m long and 1 m wide is placed in air streamed moving at 3 m/swith its length parallel with the flow. Analyse the drag force on each side of the plate.b.The density of the air is 1.2 kg/m3 and the kinematic viscosity is 1.6 x 10-5 m2/s.A pipe bore diameter D and length L has fully developed laminar flow throughout theentire length with a centre line velocity u0. Given that the drag coefficient is given asCD = 16/Re where Re = pu,D/p.С.Derive the expression of the drag force on the inside of the pipe to be FD = 8TTpu,Land hence show the pressure loss due to skin friction is pL = 32µu,L/D2%3D

Answered: Image /qna-images/answer/052dc108-d377-4086-8958-fd4b1dbf5eb5.jpg

Question 4 a. Explain briefly what is meant by drag and its form. b. A smooth thin plate 5 m long and 1 m wide is placed in air streamed moving at 3 m/s with its length parallel with the flow. Analyse the drag force on each side of the plate. The density of the air is 1.2 kg/m3 and the kinematic viscosity is 1.6 x 10-5 m²/s.

Question 4 a. Explain briefly what is meant by drag and its form. b. A smooth thin plate 5 m long and 1 m wide is placed in air streamed moving at 3 m/s with its length parallel with the flow. Analyse the drag force on each side of the plate. The density of the air is 1.2 kg/m3 and the kinematic viscosity is 1.6 x 10-5 m²/s.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter5: Analysis Of Convection Heat Transfer

Section: Chapter Questions

Problem 5.24P: Engine oil at 100C flows over and parallel to a flat surface at a velocity of 3 m/s. Calculate the...

See similar textbooks

Similar questions

a smooth flat plate of length 5 m and width 2 m is moving with a velocity of 4 m/s in stationary air of density as 1.25 kg/m³ and kinematic viscosity 1.5 x 10-5 m²/s. determine thickness of the boundary layer at the trailing edge of the smooth plate. find the total drag on one side of the plate assuming that the boundary layer is turbulent from the very beginning.
The standard sea level value of viscosity coefficient for air is μ = 1.7894×10−5 kg/(m · s) = 3.7373 × 10−7 slug/(ft · s). The wing on a Piper Cherokee general aviation aircraft is rectangular, witha span of 9.75 m and a chord of 1.6 m. The aircraft is flying at cruisingspeed (141 mi/h) at sea level. Assume that the skin-friction drag on thewing can be approximated by the drag on a flat plate of the samedimensions. Calculate the skin-friction drag:a. If the flow were completely laminar (which is not the case in real life)b. If the flow were completely turbulent (which is more realistic)Compare the two results.
We are testing a flat plate of length L = 1.125 m and width W = 0.225 m in a stream of air flowing with a velocity of 20 m/s. In test case 1, the air is flowing parallel to L and in test case 2 air is flowing parallel to W. Find: What portion of the boundary layer flow is laminar in each case? What is the highest laminar boundary layer thickness in each case? Assuming the flow is entirely turbulent over the plate, calculate the drag force in both test cases Take air density as 1.2 kg/m3 and its viscosity as μ=18×10−6μ=18×10−6 N.s/m2.
A Savonius rotor can be approximatedby the two open half-tubes in Fig mounted ona central axis. If the drag of each tube is similar to thatin Table 7.2, derive an approximate formula for therotation rate Ω, as a function of U, D, L, and the fluidproperties (ρ, μ).
Air at 20 °C flows at V = 10 m/s over a flat plate of length L= 1.52 m and width W = 2 m.Calculate the boundary layer thickness at the trailing edge of plate and drag force on one sideof plate if:a. Surface of plate is smooth.b. Surface of plate is rough.The air properties at 20 °C are: Density, ? = 1.2 kg/m3and dynamic viscosity, ? = 1.8x 10-5kg/m·s and kinematic viscosity, ν = 1.516×10-5m2/s. kindly give me the solution of this problem with correct and logical reasoning.
Air at 20 °C flows at V = 10 m/s over a flat plate of length L= 1.52 m and width W = 2 m.Calculate the boundary layer thickness at the trailing edge of plate and drag force on one sideof plate if:a. Surface of plate is smooth.b. Surface of plate is rough.The air properties at 20 °C are: Density, ? = 1.2 kg/m3and dynamic viscosity, ? = 1.8x 10-5kg/m·s and kinematic viscosity, ν = 1.516×10-5m2/s. I got the first solution which was wrong kindly solve it correctly
Air at 20 °C flows at V = 10 m/s over a flat plate of length L= 1.52 m and width W = 2 m.Calculate the boundary layer thickness at the trailing edge of plate and drag force on one sideof plate if:a. Surface of plate is smooth.b. Surface of plate is rough.The air properties at 20 °C are: Density, ? = 1.2 kg/m3and dynamic viscosity, ? = 1.8x 10-5kg/m·s and kinematic viscosity, ν = 1.516×10-5m2/s
A) What is an adverse pressure gradient, and where does it occur on an airfoil (Show that onan airfoil using a free hand sketch)?B) What causes the flow to separate from an airfoil?C) What are the two major consequences of flow separation?D) A B-2A aircraft is flying at H ft in standard day conditions at a velocity V kn. If the meanchord length is C ft.i- Find the overall or total Reynolds number for the aircraft.ii- Find the percentage of the wing chord where laminar flow is present, if Reynoldsnumber is 500,000.
plate 450 mm x 150 mm has been placed longitudinally in a stream of crude oil (specific gravity 0.925 and kinematic viscosity of 9.0 x 10-5 m2/s) which flows with velocity of 6 m/s. Calculate: (i) the friction drag on the plate; (ii) the thickness of the boundary layer at a distance 215 mm from the trailing edge;(iii) the thickness of the boundary layer at the trailing edge; (iv) shear stress at the trailing edge.
Read the question carefully and give me right solutions with clear calculations. The air flows past a 1m diameter disk oriented normal to upstream flow at 6.8m/s. The pressure distribution on front of the disk is function of the radius, where p(r) = (25 − 100 r2 ) N/m2 , and the pressure acts uniformly on back side with suction pressure of pback = −22 P a. a. Determine the total drag force on the disk. b. Calculate the drag coefficient for the disk . (Density = 1.25 kg/m3 ).
A thin flat plate 20 cm by 90 cm is immersed in a 1m/s stream of water at 20 °c ( density=998, viscosity=0.001)the stream is parallel to the long side, compute the total friction drag considering both front and back sides of the plate
Q6. Two large fixed parallel planes are 12 mm apart. The space between the surfaces is filled with oil of viscosity 0.972 N.s / m². A flat thin plate 0.25 m² area moves through the oil at a velocity of 0.3 m / s. Calculate the drag force: (1) When the plate is equidistant from both the planes, and (ii) When the thin plate is at a distance of 4 mm from one of the plane surfaces.