QUESTION 5: A vertical 2.0 m high and 2.0 m wide enclosure consists of two surfaces separated by a 0.25 m air gap at atmospheric pressure. If the surface temperatures across the air gap are measured to be 10°C and 60°C and the surface emissivities to be 0.25 and 0.85, determine the fraction of heat transferred through the enclosure by radiation.

QUESTION 5: A vertical 2.0 m high and 2.0 m wide enclosure consists of two surfaces separated by a 0.25 m air gap at atmospheric pressure. If the surface temperatures across the air gap are measured to be 10°C and 60°C and the surface emissivities to be 0.25 and 0.85, determine the fraction of heat transferred through the enclosure by radiation.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter11: Heat Transfer By Radiation

Section: Chapter Questions

Problem 11.66P

See similar textbooks

Similar questions

Three thin sheets of polished aluminum are placed parallel to each other so that the distance between them is very small compared to the size of the sheets. If one of the outer sheets is at 280C and the other outer sheet is at 60C, calculate the temperature of the intermediate sheet and the net rate of heat flow by radiation. Convection can be ignored.
Two large parallel plates with surface conditions approximating those of a blackbody are maintained at 816C and 260C, respectively. Determine the rate of heat transfer by radiation between the plates in W/m2 and the radiative heat transfer coefficient in W/m2K.
Determine the rate of radiant heat emission in watts per square meter from a blackbody at (a) 15C, (b) 600C, and (c) 5700C.
1.28 The sun has a radius of and approximates a blackbody with a surface temperature of about 5800 K. Calculate the total rate of radiation from the sun and the emitted radiation flux per square meter of surface area.
2. A thin aluminum sheet with an emissivity of 0.15 on both sides is placed between two very large parallel plates, which are maintained at uniform temperatures T1 = 900 K and T2 = 650 K and have emissivities ?1 = 0.5 and ?2 = 0.8, respectively. Determine the net rate of radiation heat transfer between two plates per unit surface area of the plates and compare the result with that without the shield
Radiation from a small opening from an isothermal enclosure can be considered as _______.
A 5-in-diameter spherical ball is known to emit radiation at a rate of 550 Btu/h when its surface temperature is 950 R. Determine the average emissivity of the ball at this temperature.
Two very large parallel plates are kept at uniform temperatures T1=800 K and T2=500 K, and have emissivities ε1=0.2 y ε2=0.7, respectively, as shown in the figure. Determine the net rate of radiation heat transfer between the two surfaces per unit surface area of the plates.
Two concentric spheres of diameters D1 = 15 cm and D2 = 25 cm are separated by air at 1 atm pressure. The surface temperatures of the two spheres enclosing the air are T1 = 350 K and T2 = 275 K, respectively, and their emissivities are 0.75. Determine the rate of heat transfer from the inner sphere to the outer sphere by (a) natural convection and (b) radiation.
Define Emissivity of some materials at 300 K.
A 2-m-internal-diameter double-walled spherical tank is used to store iced water at 0°C. Each wall is 0.5 cm thick, and the 1.5-cm-thick air space between the two walls of the tank is evacuated in order to minimize heat transfer. The surfaces surrounding the evacuated space are polished so that each surface has an emissivity of 0.15. The temperature of the outer wall of the tank is measured to be 20°C. Assuming the inner wall of the steel tank to be at 0°C, determine (a) the rate of heat transfer to the iced water in the tank and (b) the amount of ice at 0°C that melts during a 24-h period.
A concentric cylinder with outer and inner radii of 8 cm and 6 cm, respectively, has length of 1 mwith emissivities of the inner and outer radii at 0.4 and 0.6, respectively. Determine the heattransfer from the outer cylinder to the inner cylinder if the inner and outer temperatures are400K and 600K, respectively.