reinforced concrete beam, b by h with tensile reinforcement of 6-25mm diameter bars is simply supported on a clear span of 12m. Given: fc = 12 MPa fs = 140 Mpa wc = 24 kN/m3 n = 12 b = 331 mm h = 602 mm d = 582 mm determine the ff.

reinforced concrete beam, b by h with tensile reinforcement of 6-25mm diameter bars is simply supported on a clear span of 12m. Given: fc = 12 MPa fs = 140 Mpa wc = 24 kN/m3 n = 12 b = 331 mm h = 602 mm d = 582 mm determine the ff.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: The rigid bar shown is pinned at A and supported by two steel rods, each having a diameter of 1 in.…

A: Given, d = 1 in P = 2 kip a = b = 1 ft

Q: Water is flowing in a 90° triangular channel at a depth of 39 cm. A hydraulic jump occurs. The depth…

Q: Determine the flowrate Q for this system.

A: ###Determination of Flow Rate and ##Calculation of EGL and HGL###

Q: The concrete floor of a hand regulator is level with the channel bed and is 13 m long. The depth of…

A: Given:- The concrete floor of a hand regulator is level with the channel bed is 13 m long The depth…

Q: 2. A beam 20 m is supported by a roller at A and hinged at B. Three moving loads of 40 kN, 20 kN and…

Q: (3) Two beams AB and BC are pinned connected at B, fixed to wall A and supported by a roller at C.…

A: Given Data Find the support reaction at support A and shear force and bending moment at D which is…

Q: Solve the Ay and Gy of this symmetrical Howe truss. After that, solve it using METHOD OF SECTIONS.

A: NOTE : Since you have asked multiple methods, we will solve the first method for you. If you want…

Q: Calculate the forces in members BC, BE, and EF. Solve for each force from an equilibrium equation…

Q: Two The foundations supporting two columns of a building are shown in figure. An extensive soil…

Q: What are Procedures, apparatus, and calculations needed in Fall Cone/ Cone Penetration Method

Q: For the given 7-m simply supported nonrectangular SRB (f'c = 27.6 MPa & fy = 275 MPa which carries…

A: Answer (1) Calculation of equivalent compressive force To calculate the equivalent compressive…

Q: I. Proving. SHOW THAT 1. R = A/P → D = 4R y (hf)D fyv² 4L 8g 2. T =

Q: A beam with a W360x45 section (Beam weight 45 kg) is used as a cantilever beam 7.5 m long. Find the…

A: uniform distributed load : A uniform distributed load is a force delivered uniformly over the length…

Q: B) Prove that = (1-n) (1 + wc) GsYw

Q: W 10k b A

Q: Q4: For the RC beam section shown in figure below, find the location of neutral axis (N.A) and the…

A: Given: h = 500 mm d = 450 mm b = 250 mm fc = 30 MPa fy = 420 MPa Es = 200000 MPa Ec = 20000 MPa 3…

Q: The footing shown in Figure (1) carries (24 columns) spaced at (5 m) center to center. The vertical…

Q: SITUATION 8. Boat A moves with a constant velocity of 20ft/sec, starting from the position shown in…

A: GIVEN : V= velocity of boat= 20 ft/sec Total distance covered by projectile in x-direction in t=5…

Q: AW18 x 40 standard steel shape is used to support the loads shown on the beam. Assume P = 19 kips, w…

Q: Determine forces in each member of the frame. E is internal roller and C, F and G are internal hinge

A: Here to find the reaction forces we have to start by drawing the FBD of the entire truss. Now if we…

Q: An upward flow of oil (mass density 800 kg/m³, dynamic viscosity 0.8 kg/m-s) takes place under…

A: Given- Mass density = 800 kg/m3 Dynamic viscosity=0.8 kg/m-s Pressure at sections 1 and 2 are- 435…

Q: wheat requires 7.5 cm of water after every 28 days and the b eriod of wheat is 140 days, what is the…

Q: Hi, i have drawn out the question in the attached image. Please calculate and plot the distributions…

Q: An unsupported excavation is made to a maximum possible depth of clay soil having (Unit weight 18…

Q: A 500 mm diameter and 20 to long concrete pile is driven into a sand where y-18.5 kN/m' and 9-32".…

A: The following are the given data. Diameter = 500 mm Length of concrete pile = 20 m γ = 18.5 kN/m3 ϕ'…

Q: A water with low alkalinity of 15 mg/L as CaCO3 will be treated with the ferrous sulphate-lime…

A: The given data is as follow: Alkalinity of water=15 mg/L as CaCO3Dosage of FeSO4=18 mg/LMolecular…

Q: A P = 230 KN C B TIT D P

Q: Determine the equivalent depth of water contained in a 1-m soil profile if the mass wetness of the…

Q: In the figure below, determine the area included between the base line and the irregular boundary.…

Q: Determine the equilibrium speed and cant to be provided on a BG curve of 3 degree if the speeds of…

A: Given,BG curveDegree of curve=3speeds of several trains running on the line are as follows: 15…

Q: 1- Two circular bars are connected in series, as shown in the figure. An upward pressure of 50 MPa…

A: Given data: Upward pressure applied on the bar 1 = 50 MPa Downward load applied on bar 2 = 800 KN…

Q: The office building has interior columns spaced 5 m apart in perpendicular directions. Determine the…

A: To find: The reduced live load supported by a typical interior column located on the first floor…

Q: For this problem, I was wondering where the 0.15 for the dead load and where the 0.04 came from the…

A: Floor system

Q: 1. A cylindrical steel specimen, with an initial diameter of 7mm, has elongated by 40% at the point…

A: Given, Di = 7 mm EL = 40% P = 35 kN

Q: The relative velocity is defined so that VA/B-VA-VB-A graphical version of this equatio 0 Answer: 0-…

Q: Explain scouring in the sedimentation tank

A: Context: Scouring in sedimentation tank

Q: B) For the soil condition shown in Figure (1). Determine: 1- The rate of flow per unit area. 2- The…

Q: The depth of water below the spillway and after hydraulic jump are 1 m and 6 m respectively. The…

Q: Q1: A column foundation (Fig. 1) is 3 mx 2 m in plan. Given: Dr-2m. 6-25, C-50 kN/m². Using modified…

A: Reference : Foundation Engineering, Net allowable load. To determine : Net allowable load Q in KN.…

Q: A rigid steel container is partially filled with 1.232-liters of liquid at 15 atm. At a pressure of…

Q: what are the various mechanism of coagulation in water treatment plant?

A: Data provided : Coagulation is defined as the chemical water remedy method used to take away solids…

Q: 4. A cantilever beam is carrying a 15 kN/m uniformly distributed load over its length of 5 meters.…

Q: A cylindrical bronze sleeve (2) is held in compression against a rigid machine wall by a…

A: Step 1: Determine the coefficient of thermal expansion (α) of the steel bolt α = 11.7 x 10-6/°C Step…

Q: I. Proving. SHOW THAT 6. v=0.849CD2.63 50.54 → hf = 10.674LQ1.8 C1.85 D4.87

A: Given, V = 0.849 C D2.63 S0.54

Q: 2 1 5. v=R3S2 n hf 10.29n²LQ² D16/3

Q: *2-20. Determine the reactions on the b SOLUTION Equations of Equilibrium. Referring to the FBD of…

Q: A cast-iron beam carries a uniformly distributed load on a simple span. Compute the flange width "b"…

A: A cast iron beam is given in question and it has been asked to determine b(width of flange)

Q: A certain soil has the following properties: Gs == 2,71, n = 40% and w 20%. The degree of saturation…

Q: The crank OA is shown. If OA = 48 mm, 0 = 70°, and ß = 55°, determine the moment of the force F of…

Q: The chainage of the intersection point of two straights is 1585.60 m and the angle of intersection…

Question

A reinforced concrete beam, b by h with tensile reinforcement of 6-25mm diameter bars is simply supported on a clear span of 12m.

Given:

f_c = 12 MPa

f_s = 140 Mpa

w_c = 24 kN/m³

n = 12

b = 331 mm

h = 602 mm

d = 582 mm

determine the ff.

1. Compute the moment capacity of concrete in kN-m.

2. Compute the moment capacity of steel in kN-m.

3. Aside from the uniformly distributed self-weight of the reinforced concrete, what will be the maximum two equal concentrated loads it can carry that will be located at its third points in kN?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Similar questions

Determine the maximum force P in kips that the reinforced concrete column can support. ??? = 30,000 ??? and ?? = 4,000 ???. The radius of steel rods is 0.5 inch. The allowable stress of steel is 10 ksi while that of concrete is 4.5 ksi.
A simply supported rectangular beam of length 6.45m has a width of 437.5 and an effective depth of 692.5. The beam is to be reinforced using 12 mm bars. The beam supports service dead loads of 31 kN/m and 39.5kN/m., respectively. the fc' is 28MPa, fy is 420MPa and Wu is 89.9kN/m. 1. what is the ultimate moment capacity of the beam? 2. what is the height of the equivalent stress block? 3. Determine the number of bars required for this beam
A wooden beam has a width of 150 mm and 300 mm depth loaded as shown. The maximum allowable flexural stress is 8 MPa. 1. Which of the following gives the moment capacity of the beam? a. 18 kN-m b. 10 kN-m c. 20 kN-m d. 14 kN-m 2. Which of the following gives the maximum safe value of x if w = 10 kN/m? a. 1.987 m b. 1.897 m c. 2.631 m d. 2.415 m 3. Which of the following gives the maximum safe value of P if w = 10 kN/m and x is value in previous problem? a. 18 kN b. 20 kN c. 12 kN d. 24 kN
Determine support reaction at B . Given P=100 Kn L=10 m
Determine support reaction. Given a=5 m b=10 m P=30 KN
The floor system of an apartment building consists of 100mm thick reinforced concrete slab (unit weight = 23.6 KN/m^3) resting on three steel floor beams 3.0 meters on centers. Calculate the total dead load in KN/m due to slab for a single floor beam. Assume one-way slab.
Refer to the beam loaded as shown. (a)What is the Value of horizontal reaction at the fixed support?(b)What is the value of resulting couple at A?
A billboard 3m high by 4m wide is supported as shown in the figure. The totl weight of the billboard is 30 kN. H = 1.5 m and tetha= 60 degrees. Wimd pressure, q= 1.6 kpa Wind pressure coefficient = 1.0. Determine the reactions at the support.
A triangular wooden beam width 150 mm base and 300 mm height carries two concentrated load of 20 kN at third points. If the simple span of the beam is 6 m, 1. Compute the maximum shearing stress of the beam. a. 0.58 MPa b. 1.33 MPa c. 0.48 MPa d. 0.86 MPa 2. Compute the bending stress of the beam. a. 56.33 MPa b. 71.11 MPa c. 78.48 MPa d. 45.78 MPa
Two wooden joists 100mm * 200 mm along the joint AB as shown in figure. Determine the normal and shearing stress in glued surface if P = 400 N
Two wooden joists 100mm * 200 mm along the joint AB as shown in figure. Determine the normal and shearing stress in glued surface if P = 400 N
A 5-m propped beam carries a uniformly distributed load equal to 45 kN/m applied throughout the beam. If the reaction at the roller is 84.375 kN, what is the maximum flexural shear stress if the beam has a rectangular cross-section with b = 300 mm and h = 600 mm? (in MPa)