2:27Done Case Study-ASSIGNMENT-Sectio...Create the given topology, calculate the IP AddressingScheme and configure it.OMANTELHCTSCTGigoro / 2911 Gigo/1RouteroFa0/1Fa02HCT LANSCT LAN2960- Fao2SwtcFaorn -24TTFa0/1wtchoFaoFaoPC-PTPCOPC-PTPC1Requirements: Subnet the 192.168.114.0/24 network andcalculate the no subnets and hosts using the VLSM.• to provide 57 host addresses to the SCT LAN. Assign thefirst subnet to SCT LAN.• Starting with the 2nd subnet, subnet the network again so thatthe new subnets will provide 26 host addresses per subnetwhile wasting the fewest addresses assign the new 1stsubnet to the HCT LAN.Write the Subnets:Subnet No/ Network First Host Address Last Host AddressSubnet MaskBroadcastAddressAddress192.168.114.0Complete the table with the Assigned IPV4 Addresses for thedevicesDeviceInterface IP Address SubnetDefault Gateway DescriptionMaskNameOMANTEL Gig0/0N/ALink to SCT LANGig0/1N/ALink to HCT LANSCT-PCFa0НСТ-РСFa0SCTVLAN IНСТVLAN I

Answered: Requirements: Subnet the…

Engineering

Computer Science

Requirements: Subnet the 192.168.114.0/24 network and calculate the no subnets and hosts using the VLSM.

Comptia A+ Core 1 Exam: Guide To Computing Infrastructure (mindtap Course List)

10th Edition

ISBN:9780357108376

Author:Jean Andrews, Joy Dark, Jill West

Publisher:Jean Andrews, Joy Dark, Jill West

Chapter8: Network Infrastructure And Troubleshooting

Section: Chapter Questions

Problem 8TC

See similar textbooks

Related questions

Q: IP Subnetting For the given IP address 196.62.146.174/25, answer the following questions: a. Subnet…

A: QUESTION A; The subnet cover for this IP address would be 255.255.255.128. QUESTION B; There…

Q: Let IP address 200.210.56.76/28 find the subnet mask, subnet id ,broadcast address and also find…

A: IP Address: An IP is stands for Internet protocol It is a numerical label(designation), such as…

Q: An ISP supplies a class C network of 192.168.10.0 to an enterprise that requires four networks with…

A: 192.168.10.0 This address belongs to class C where number of network bits is 24. So number of host…

Q: Is it feasible for a single Media Access Control (MAC) address to be used by more than one network…

A: Media access control: Is it possible for two different network interfaces to have the same MAC…

Q: B. An organization granted the block 211.17.180.0. The administrator wants to create 32 subnets a…

A: Given: B. An organization granted the block 211.17.180.0. The administrator wants to create 32…

Q: IP Subnetting For the given IP address 196.62.146.174/25, answer the following questions: a. Subnet…

Q: You have been allocated a class B network address of 129.0.0.0. You need to create at least 20…

A: Given Class B network is 129.0.0.0/16 Here the required number of networks are,at least 20…

Q: (c) An ISP is granted a block of IP 16.12.64.0/20 and needs to allocate addresses for 3…

Q: 802.11 versatility through which a wireless station travels within the same subnet from one BSS…

A: Both access points (APs) in a wireless LAN are connected to a switch. A forwarding table on the…

Q: 172. 16. 0. 0 /19 (resolve sub mask) Design a network for this IP address for Class B (VLAN)…

A: 172.16.0.0 /19 is a Class B private network which has 255.255.224.0 subnet mask and number of…

Q: Q3/ Subnet the Class C IP Address 195.168.3.1 So that you have **** network each with a maximum (10,…

A: Bits needed for 10 subnets =4 =24 =16 potential subnets Current mask= 255.255.255.0Bits necessary…

Q: IP Subnetting For the given IP address 196.62.146.174/25, answer the following questions: a. Subnet…

A: As per answering policy I can answer only 3 parts you can repost the questions for another subparts.…

Q: a. How many subnets are there in this network? b. Specify the first valid host and last valid host…

A: The required answer is

Q: Subject: Computer Networks Question: Find the subnet mask, Network address from below image Problem-…

A: Given: Find the subnet mask and network address.

Q: 200.210.56.76/28 find the subnet mask, subnet id broadcast address and also find total number of…

A: Answer is in next step.

Q: 1) The 802.11 MAC layer uses the CSMA/CA (carrier sense with multiple access and collision…

A: We need to discuss, why collision avoidance is critical in wireless networks. *** As per the…

Q: A network administrator subnets class C network into subnets with /29 prefix. Answer the following:…

A: Your question is in class c network into subnets with /29 prefix How many subnets are created ..…

Q: Challenge: Assume that the assigned network addresses are correct. Can you deduce (guess) what the…

A: To use the host's formula, let's first look at a simple example. Say you plan to use the IP address…

Q: Can two network interfaces share MAC addresses? Or not? Is it possible for two network interfaces to…

A: Can two network interfaces share MAC addresses? No two devices on a local network(LAN) should ever…

Q: Part 1: Develop an IP Addressing Scheme You are assigned the IPv4 networks from the table below. You…

A: IP addressing Scheme: Given network is 192.168.10.0/24 Here the requirement is to subnet the given…

Q: Q3) Subnetting Using Variable size Subnet Masks (VLSM): You have to subnet the network address…

A: Given IP address: 172.16.0.0/16 The VLSM subnetting scheme: First we make the subnet block for the…

Q: IP Subnetting For the given IP address 196.62.146.174/25, answer the following questions: a. Subnet…

A: As per answering policy I can answer only 3 parts you can repost the questions for another subparts.

Q: IP Subnetting For the given IP address 196.62.146.174/25, answer the following questions: a. Subnet…

A: For the given IP address 196.62.146.174/25, answer the following questions: Subnet Mask Number of…

Q: A network administrator subnets class C network into subnets with /29 prefix. Answer the following:…

A: The question is on finding number of subnets and number of valid hosts that are available on each of…

Q: Daffodil Institute is granted the block 172.20.110.0/16. The administrator wants to create 16…

A: IP(Internet Protocol) is a 32-bit address that is used to uniquely identify the device in a network.…

Q: If the default mask for network was 255.255.255.0 and after subnetting had become Subnet mask…

A: Given default subnet mask is 255.255.255.0 After subnetting , mask is 255.255.255.192 We have to…

Q: IP Address 192.168.10.0/24 using normal subnet masking, create 8 networks. Should include the…

A: subnet, first host, last host, Broadcast id and subnet mask are mentioned in step 2.

Q: Use VLSM to subnet the 128.153.0.0/22 network based on the following requirements shown on the…

A: VLSM happens when an internetwork involves more than one veil for various subnets of a solitary…

Q: Break the class C address 216.21.5.0/24 into five (5) subnets. i. Why is there no need…

A: Actually, MAC stands for Medium Access Control.

Q: A backbone LAN is usually a ______. a. bus b. star c. either (a) or (b) d. neither (a) nor (b)

A: Backbone Network is basically an high capacity network which is used to connect different part of…

Q: Let IP address 200 210.56.76/28 find the subnet mask, subnet id ,broadcast address and also find…

A: Find the required answer given as below :

Q: 3) Subnetting Using Variable size Subnet Masks (VLSM): ou have to subnet the network address…

A: Given IP address: 172.16.0.0/16 The VLSM subnetting scheme: First we make the subnet block for the…

Q: 1. A data communication system that spans states, countries, or the entire globe is called 2. UDP…

A: 1. Data communication system spanning states, countries, or the whole world is ___ Ans:Wan 2. UDP…

Q: LAN A1 is using the subnet 172.20.16.0/23. Assign the next available subnet to LAN A2 for a maximum…

A: Subnetting: The subnetting is a procedure of divide a single large network into two or more…

Q: 24 answer the following: A\if you need to make a supernet out of 4 block class C, what is the…

A: Answer: Given 4 Block class C we need to find supernet mask and number if IP in the supernet

Q: 802.11 mobility, in which a wireless station moves from one BSS to another within the same subnet.…

A: answer to the above question is in step2.

Q: Use VLSM to subnet the 128.153.0.0/22 network based on the following requirements shown on the…

A: as basic network that we are provided is 128.153.0.0/22 so we have 1024 valid ip addresses…

Q: Subnetting Problem 6 Number of needed subnets 10 Network Address 192.70.10.0 Address class, Default…

A: Solution :-

Q: Subnets used: For the LAN addresses, you must use the classful network space 192.168.13.0. Use the…

A: Subnetting is a process in which large network is divide into smaller IP networks in order to obtain…

Q: Let IP address 200.210.56.76/28 find the subnet mask , subnet id ,broadcast address and also find…

A: Given IP address is 200.210.56.76/28 In this IP address, 28 bits are network id bits. Number of host…

Q: Explain the difference between connectionless and connection-oriented services 2). Break the class…

A: The complete answer is given below .

Q: Q1. Given that Number of needed subnets:10 Network Address: 192.70.10.0 What is: Address class:…

Q: Explain,............ VLSM tables for these following IP addresses: 1) 10.45.0.0/16 - Need…

A: VLSM is abbreviated as Variable-Length Subnet Masking. It specifies a different subnet mask for the…

Q: 7. Host IP Address Class Subnet Mask # of Subnet Number of Number of Host Bits Subnets Addresses…

Q: Subnet 1 Subnet 2 Subnet 3 Subnet 4

A: The answer is

Q: An ISP Is granted a block of addresses starting with 150.80.0.0/16. The ISP wants to distribute…

A: Q . 150.80.0.0/16 means number of network bits is 16 and number of host bits is 16 Now we have 200…

Q: Using a single Media Access Control (MAC) address across many network interfaces is theoretically…

A: The question is: Using a single Media Access Control (MAC) address across many network interfaces is…

Q: If the default mask for network was 255.255.255.0 and after subnetting had become Subnet mask…

A: Question about Given default mask is 255.255.255.0 After subnetting mask is 255.255.255.192 We have…

Q: Given the following host requirements and using the IP address 195. 20. 5.0/18 divide the network…

A: The following host requirements and using the IP address 195. 20. 5.0/18 divide the network using…

Concept explainers

Device network connection

The network segment is formed by attaching connectivity devices to network cables. Data are not filtered by the hub. The data packets are transmitted again to all the parts through the hub. Nowadays the computers are connected to networks using a hub or switch.

Question

2:27
Done Case Study-ASSIGNMENT-Sectio...
Create the given topology, calculate the IP Addressing
Scheme and configure it.
OMANTEL
HCT
SCT
Gigoro / 2911 Gigo/1
Routero
Fa0/1
Fa02
HCT LAN
SCT LAN
2960- Fao2
Swtc
Faorn -24TT
Fa0/1
wtcho
Fao
Fao
PC-PT
PCO
PC-PT
PC1
Requirements: Subnet the 192.168.114.0/24 network and
calculate the no subnets and hosts using the VLSM.
• to provide 57 host addresses to the SCT LAN. Assign the
first subnet to SCT LAN.
• Starting with the 2nd subnet, subnet the network again so that
the new subnets will provide 26 host addresses per subnet
while wasting the fewest addresses assign the new 1st
subnet to the HCT LAN.
Write the Subnets:
Subnet No
/ Network First Host Address Last Host Address
Subnet Mask
Broadcast
Address
Address
192.168.114.0
Complete the table with the Assigned IPV4 Addresses for the
devices
Device
Interface IP Address Subnet
Default Gateway Description
Mask
Name
OMANTEL Gig0/0
N/A
Link to SCT LAN
Gig0/1
N/A
Link to HCT LAN
SCT-PC
Fa0
НСТ-РС
Fa0
SCT
VLAN I
НСТ
VLAN I

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, computer-science and related others by exploring similar questions and additional content below.

Similar questions

Suppose you have the following network requirements, for Given an IP address and mask of 9.0.0.0/8, design an IP addressing scheme using VLSM? How is the efficiency of this method achieved? Use the topology in Figure to answer the questions. a. Network 1 needs to support 330 host addresses. b. Network 2 needs to support 62 host addresses. c. Network 3 needs to support 2 host addresses. d. Network 4 needs to support 520 host addresses. e. Network 5 needs to support 230 host addresses. f. Network 6 needs to support 62 host addresses. g. Network 7 needs to support 2 host addresses. h. Network 8 needs to support 2 host addresses.
question 2 : Given the following topology. By calculating a network address yourself(Calculation Process: First three digit of your ID.fourth and fifth Digit of your ID.last Two Digit of your ID.0/choose a suitable subnet mask). Now perform a classless subnetting (VLSM) and show the results. ( You can use a table with ROW as a Network Address and COLUMN for representing the Number of hosts, Subnet Mask, etc. my Id : 2020000010051
Answer the questions below with reference to Data Link Layer (max 250 words): i) A local Area Network (LAN) Medium Access Control (MAC) protocol aims to achieve fair and efficient access to a LAN transmission medium. Characterise the distinction between authorisation based (“taking turns”) and contention based (random access) MAC layer protocols and discuss the suitability of each protocol in light traffic and heavy traffic networks in terms of fairness and efficiency of access. ii) In CSMA/CD, after the fifth collision, what is the probability that a node chooses k=4. The result k=4 corresponds to a delay of how many seconds on a 10Mbps Ethernet?
IP Addressing and Subnettingwith complete solution C. Shorten the following IPv6 addresses: 1. FD81:273B:6A9D:0000:0DA6:CACD:2347:35962. FD56:0000:004D:E798:F100:2344:1002:34613. FD00:8E00:006c:0000:0006:B761:AABD:0034
Question 9 Convert the following IPv4 address into dot decimal address, and determine which type of these addresses are. a) 10000001 00001011 00001011 11101111 b) 11000001 10000011 00011011 11111111 c) 11100111 11011011 10001011 01101111 Computer network Full explain this question
Suppose you open your BMCC mailbox first thing on a Monday morning and find that your messages have arrived. Assuming the BMCC server does not have access to the MAC address of the device reading these emails. Explain in detail how the ARP protocol determines which device on the LAN will be the recipient of incoming Internet data. After 22 years, the transition to IPv6 addressing is complete for around 30 percent of Internet traffic. When comparing IPv4 and IPv6 address headers, the Ethernet frames' Maximum Transmission Unit (MTU) stands out as a potential stumbling block.
Question 5. Write a note on the following a. Compare the header format of IPv4 and IPv6. How tunneling is used to transition fromIPv4 to IPv6?b. Use Dijkstra’s algorithm on the following network to find shortest paths. c. Data 01110001101010100 is received where receiver uses odd parity. Is the data corrupted.Justify your answerd. What are the three main classes of MAC protocols? Explain each a one or two linese. Give steps of ARP mapping from IP to MAC address.
I want to make a functional imitation of these 2 LANs, however I'm failing to do so when connecting the Routers, can someone please give a detailed step-by-step of building this topology functioning? using the referred IPs and Interfaces as reference please, will upvote if useful. Static RoutesR0(config) Fip route192.168.2.0255.255.255.0192.168.3.2R1(config) Fip route192.168.1.0255.255.255.0192.168.3.1
Provide short answers to the following: How do you determine whether an IP address is a multicast address?==solve What is the TTL field in the IP header used for?==solve What is the maximum length of options bytes that can be carried in an IPv4 header?==solve Why do we have to multiply the offset field of an IP datagram by eight to obtain the real offset for the first byte of the datagram?====need to solve this question
q no 5: In the above network diagram, IP and MAC addresses are given for network nodes. Suppose Host1 (Shahid) sends a datagram to Host2 (Khalid). What IP and MAC addresses (source and destination) will be written in IP and Data link layer headers respectively, for the following intermediate points from Host1 to Host2? Host1 to Router1 (R1) Router1 to Router2 (R2) Router2 to Host2
51- A network for a local office requires 4 LAN subnets as follows: · Subnet A - North Office with 31 hosts; · Subnet B - East Office with 15 hosts; and · Subnet C - South Office with 7 hosts. · Subnet D – West Office with 4 hosts. Given the IP Address 192.168.15.0 /24 and above described network requirements: 1. Design an optimal address scheme using Variable Length Subnet Mask (VLSM) method; and What will be the network address of Subnet A? Select one: A. 192.168.15.0 B. 192.168.15.32 C. 192.16.15.128 D. 192.168.15.1
Considering this question here: https://www.bartleby.com/questions-and-answers/a-type-of-network-router-has-a-bandwidth-total-to-first-hardware-failure-called-s-expressed-in-terab/64a9f7b8-3b82-48b9-beb7-bbd23cfee933?v=2&mrasn=800265.994143.tANIg6qM I need the resolution for the third part. Answer to the first part is already in the link above. Question is: An actual experiment is performed, the infrastructure team has obtained the following bandwidth totals to failure: 9.2, 5.6, 18.4, 12.1, 10.7 Estimate the model-parameter with the maximum likelihood and compute the expectation of the bandwidth total to failure of the dual-router-system.