SITUATION: A steel tape with coefficient of linear expansion of 0.0000116 per °C is known to be 50 m long at 20°C. The tape was used to measure a line which was found to be 532.28 m long and when the temperature was 35°C. Zoom image Find the correct length of the line. O532.62 532.29 O532.86 532.37

SITUATION: A steel tape with coefficient of linear expansion of 0.0000116 per °C is known to be 50 m long at 20°C. The tape was used to measure a line which was found to be 532.28 m long and when the temperature was 35°C. Zoom image Find the correct length of the line. O532.62 532.29 O532.86 532.37

Engineering Fundamentals: An Introduction to Engineering (MindTap Course List)

5th Edition

ISBN:9781305084766

Author:Saeed Moaveni

Publisher:Saeed Moaveni

Chapter7: Length And Length-related Variables In Engineering

Section: Chapter Questions

Problem 42P

See similar textbooks

Similar questions

The taped distance of a line is 198.175 m using a 50 m steel tape weighing 2.4 kg with a cross sectional area of 0.036 cm2 at 32°F with a pull of 8 N is applied, supported at 20 m interval during the measurement. The angle of the tape during measurement is 11°20′. The tape is exactly 50 m at a temp of 28°F at standard pull of 5 N, find the following: a) Correction due to combined correction of the tape b) Correction due to slope c) The correct horizontal distance of the line
A spherical triangle has the following parts: C=900, c=840, and a=650. Compute angle B. Answer: 83 deg, 87deg If the point (2, 3) is equidistant from (x, -2) and (7, 4), find x.Answer: 3
The measured length of an inclined distance was recorded to be 417.698 m long. The difference in elevation between the initial and end points was found to be 1.72 m. The 25 m tape is of standard length at temperature 13 ˚C. During measurement the temperature reading was 20˚C and the tape was supported at both ends with an applied pull of 72N. The tape has a weight of 0.549 kg/m. (K=0.0000116 m/˚C) Determine the corrected horizontal distance (in meters)
Find:1. What is the value of F 2. What is the value of angle theta?
The length of a series of line is found to be 342.62m in the forward direction 342.89 m in reverse direction. What is the ratio of t he error?
8. A Geodetic Engineer used a 100 m. tape in measuring a line and recorded tobe 1000.05 m long. The tape is too short by 0.025 m at a temperature reading of 32°C anda pull of 10 kg. During measurement, the temperature reading was 41.38°C and the tapewas supported at both ends and middle of the tape with an applied pull of 16 kg.Determine the correct distance of the line if the cross sectional area of tape is 0.02 sq. cm.and weighs 0.80 kg.
Please calculate for D and please explain how to input the angle 2°54'13'' in the calculator. D = 1/tan(2°54'13''/2)
What must be the pull in a (7)(10) meters tape in order to eliminate the sag and temperature correction, given the following? a = 7x10% m? E = 2x101 N/m? Weight of tape, 11 N Po = 10kg To = 22°C T = 20°C K= 0.0000116/°C The tape length is supported at both ends. Fundamentals of surveying
A line is regarded as 485 m long. It is measured with a 500 grams tape which is 30.05 m long at 20°C under a 4.5 kg pull supported throughout its length. During measurement the temperature is 4.5°C and the tape is suspended under a 6.5 Kg pull. The line is measured at 3% grade. What is the true horizontal distance? ◦E=2x106 kg/cm2 ◦v =126.54 cm3/kg Given: Nominal Tape Length L1 Total weight of tape W Standard Temperature of Tape T1 Temperature during measurement T2 Standard Pull of Tape P1 Pull applied during measurement P2 Measured Distance Di correction due incorrect tape length Ci Ground slope S Cross-sectional area of the tape A Solution correction per tape length (correction per 30-m length) incorrect tape length CI Question Blank 11 of 20 meter temperature correction CT Question Blank 12 of 20 meter pull correction CP Question Blank 13 of 20 meter sag correction CS Question Blank 14 of 20 meter slope correction (approximate method) CSL…
Given: θ=20o30' Upper Reading=2.800 m Middle Reading=2.000 m (rod reading (RR)= h) Lower Reading=1.200 m Height of Instrument=1.20 m Elevation at point O=140.50 m K=100 C=0 Compute the horizontal distance Determine the vertical distance Calculate the inclined distance find the elevation of point P
In order to find the elevation of point B, a stadia is set up at a point A whose elevation is 100.14 m. The height of the instrument is 1.52 m. The stadia intercept with the rod at B was taken as 1.75 m with the vertical angle 5 ̊30’45” at 2.1 m. The stadia constant is 100 and the value of (f+c) is 0.3. What is the elevation of point B in meters?
A 20 m tape was used for measuring a line at an average temperature of 65º F. The measured distances on the ground and slope of the ground are as given below: 2º 18′ for 125 m 3º 30′ for 250 m 1º 42′ for a distance of 170 m If the temperature at which tape was standardised is 80º F, find the true length of the line. Take α = 6.2 × 10^(–6) /ºF.