Answer should be on the choices. Please provide a NEAT or CLEAN SOLUTION. I need a written solution.so i can understand it really well. thanks Situation:A T-beam is reinforced with 8-32mm diameter tension bars with an effective depth of 700mm. Use f'c =27.60MPa and fy = 413.70MPa.T-beam properties:Effective flange width = 750mmFlange thickness = 100mmWidth of web = 350mmOverall depth = 800mmWhich of the following most nearly gives the area of the concrete compression stress block?a. 90677.94 mm2b. 95312.15 mm2C. 101325.34 mm2d. 113458.58 mm2Which of the following most nearly gives the depth of the concrete compression stress block?a. 144.79 mmb. 175.22 mmc. 209.88 mmd. 158.03 mmWhich of the following most nearly gives the design moment capacity of the given beam?a. 1213.72 kN-mb.1471.90 kN-mc.1306.77 kN-md. 1109.81 kN-m

Answered: Image /qna-images/answer/d26abab4-2cd0-49ff-9963-970366729e88.jpg

Situation: A T-beam is reinforced with 8-32mm diameter tension bars with an effective depth of 700mm. Use fc = 27.60MPa and fy = 413.70MPa. T-beam properties: Effective flange width = 750mm Flange thickness = 100mm Width of web = 350mm

Situation: A T-beam is reinforced with 8-32mm diameter tension bars with an effective depth of 700mm. Use fc = 27.60MPa and fy = 413.70MPa. T-beam properties: Effective flange width = 750mm Flange thickness = 100mm Width of web = 350mm

Principles of Foundation Engineering (MindTap Course List)

8th Edition

ISBN:9781305081550

Author:Braja M. Das

Publisher:Braja M. Das

Chapter15: Braced Cuts

Section: Chapter Questions

Problem 15.11P

See similar textbooks

Related questions

Q: Determine the moment of inertia of the shaded area about the y-axis. 2" 11" 14" Parabolic

Q: A short round wood column with an actual diameter of 250 mm is to be constructed. If the failure…

A: Given data:- The short actual diameter of the round would column, d=250 mm=0.25 m The given…

Q: The normal flows on two approach roads at an intersection are respectively 500 pcu/h and 300 pcu/h.…

Q: Determine the forces in members DE, EI, FI, and HI of the arched truss. The forces are positive if…

Q: tank contains ail sp. gr. 0.80, gasoline sp. gr. 0.90 and seawater sp. gr. 1.03. If the depths of…

Q: Calculate the moment of inertia of the shaded area about the x-axis. 83 mm 32 mm ----- -49 mm 49 mm…

Q: Solve the reactions at the supports. Use SUPERPOSTION 51kN 2m 2m 102kN 81.6kN/m 3m 2m

A: Given beam :- Here, we have to find the reaction At A, B , C In method of superpostition , we find…

Q: Problem 2 Consider the beam of length L and cross-sectional moment of inertia I shown in the figure…

A: Given data:

Q: The masonry pier is subjected to the 800kN load. Determine the equation of the line y=f(x) along…

Q: Determine the magnitude of force (lb) in member CD of the truss shown if P = 19173 lb, a = 18.6 ft,…

Q: Situation: A reinforced concrete beam is to be designed by the Strength Design Method of the Code…

Q: A 80 MPa 30° B 30 MPa 40 MPa

Q: A soil sample has an average grain diameter as 0.03 mm. The size of interstices is one eight of the…

A: Given data in question Average grain diameter Surface tension To find out Water rise

Q: Disc A rotates about a pin with an angular velocity and an angular acceleration as shown. Determine…

A: Given, α= 2 rad/s2ω=5 rad /sr=1 ft

Q: Determine the coordinates of the center of mass of the bracket, which is made from a plate of…

A: Given :

Q: A30in.*30 in. Frame column of an intermediate reinforced concrete moment frame. The column has been…

Q: A cantilever beam of length L carries a uniform load that varies uniformly from 0 at the free end to…

A: Given data

Q: Untreated wood can deteriorate when four conditions required for decay andinsects occur. States…

A: The stems and roots of trees and other woody plants, wood is a porous and fibrous structural…

Q: Two columns 300mmx300mm and 400mmx400mm are loaded by axial and bending forces as shown. They are to…

A: Footing : A footing is constructed with concrete below the ground. A footing is a part of foundation…

Q: Please show clear and complete solutions. Box the final answers. Determine the forces in members CD,…

Q: 2 A) Normal and shear stresses acting on horizontal and vertical planes at the point is shown in the…

Q: Make a cut through JK, CJ, and CD. The free-body diagram of the section to the right of the cut is…

A: Given data in question Point loads Span member dimensions To find out Angle

Q: Horton's infiltration equation was fitted to data from an infiltration test. It was found that the…

A: Given data- Initial infiltration capacity fo=20 mm/hFinal infiltration capacity fc=5 mm/hHorton's…

Q: Top layer of a soil deposit consists of a clay layer of 4 m thickness overlaying a very thick layer…

A: Given:

Q: Draw a graph to show the typical stress–strain curve for wood. On the graph,show the modulus of…

A: A significant graphical indicator of a material's mechanical properties is its stress-strain curve.

Q: An anchored sheet pile is to support a mass of cohesionless soil up to a height of 6 m above ground…

A: Given- cohesionless soil height=6 mspacing of anchor=1 munit weight of soil=21 kN/m3angle of…

Q: For the given beam, draw the simplified free-body diagram and below it the shear and bending moment…

Q: An alluvial stream (d = zero.60 mm) has a bed slope of 3 x 10-4 locate the imply speed of drift…

Q: Calculate the five day BOD value using the following facts: a) quantity of the BOD bottle = 300 mL…

Q: Determine the magnitude of force (lb) in member CD of the truss shown if P = 19173 lb, a = 18.6 ft,…

A: Given data in question Load Span member length To find out Force in CD

Q: A 2031 lb car starts from rest at point 1 and moves without friction down the track shown. Determine…

Q: Q2: Two intersecting profile gradients consist of a +1.5% gradient meeting a -1% gradient. They are…

Q: e beam is made from a material that can safely support a tensile or c Based on this criterion,…

A: Reactions :∑ MB=0RA1.6-F1=0RA=FA1.6Max moment :MMax=RA1=FA1.6 kN-m

Q: A rectangular concrete beam is 12 in. wide and has an effective depth (d) of 18 in. Compression…

Q: Calculate horizontal thrust for parabolic arch given below. Hinge is at crown. 50kN/m

Q: Situation: For the given beam E = 29,000 ksi and I = 300 in4 shown in figure 6. Determine the…

A: The given data is shown below: E=29000 ksiI=300 in.4

Q: Problem 1 A simply supported wide-flange beam has the cross-section and loading as shown in the…

Q: Q6) Define the following words. 1-Optical Square 2-Bench Mark (B.M)

A: Surveying:- The survey is a science or art to locate an unknown point with respect to a known…

Q: A rectangular beam is 24 in. wide. The architect asked for this beam to have a maximum depth of 16…

A: Answer We are given Width of beam b = 24 in Total depth h = 16 in Ultimate Moment Mu = 400 kip-ft…

Q: Using the method of joints, find the force in member AF. State if the member is tension (T) or…

Q: 20 KN 10 KN/m Sm B 2m 15 KN 5 kN/m 5m

Q: 3. b) The state of stress at a point is shown on the element. Using Mohr's cicle, determine The…

Q: Situation 2: A transmission tower is held by three guy wires attached to a pin at A and anchored by…

Q: Question 1 Draw the deflected shape of each structure. 0

A: Given data

Q: Please show clear and complete solutions. Box the final answers. Find the angle a. 310 lb a Answer:…

A: To find =Angle alpha=?

Q: For the beam of section shown, the bending moment =800 kN.m and shear force M 12.5 kN determine the…

A: Given data in question Moment Dimensions Shear force To find out Maximum bending stress Maximum…

Q: Situation: A 3m long A36 Steel column is pinned at top and bottom. Assume E=200,000 MPa and its…

Q: The pipe has a mass of 770 kg and is being towed behind a truck. (Figure 1) Figure G 0.4 m If the…

A: Given,m=770 kgθ=30°μk=0.2

Q: A half-full circular open channel is shown below. The diameter of the channel is D=2 m. (2)…

A: Answer We are given Half full circular open channel Diameter of the channel D = 2 m We know that the…

Q: Example 5.13 The connection shown in Fig. Ex. 5.13 uses 20 mm diameter 10.9S grade bolts with…

A: Given that :

Concept explainers

Introduction to Engineering Design

Students are often confused with engineering and design. The term engineering design has two words with different meanings, engineering, and design. The term engineering implies applications of laws and principles of science to design and analyze physical structures and components. In civil engineering, students apply the concept of physics and chemistry to design and build structures and buildings. In engineering disciplines, the term design means determining the dimensions, loads, and associated influences on the component due to the applied loads such as stresses and deformations. The estimation of such parameters is crucial to make the component or structure foolproof.

Question

Answer should be on the choices. Please provide a NEAT or CLEAN SOLUTION. I need a written solution.so i can understand it really well. thanks

Situation:
A T-beam is reinforced with 8-32mm diameter tension bars with an effective depth of 700mm. Use f'c =
27.60MPa and fy = 413.70MPa.
T-beam properties:
Effective flange width = 750mm
Flange thickness = 100mm
Width of web = 350mm
Overall depth = 800mm
Which of the following most nearly gives the area of the concrete compression stress block?
a. 90677.94 mm2
b. 95312.15 mm2
C. 101325.34 mm2
d. 113458.58 mm2
Which of the following most nearly gives the depth of the concrete compression stress block?
a. 144.79 mm
b. 175.22 mm
c. 209.88 mm
d. 158.03 mm
Which of the following most nearly gives the design moment capacity of the given beam?
a. 1213.72 kN-m
b.
1471.90 kN-m
c.
1306.77 kN-m
d. 1109.81 kN-m

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

A long braced cut shown is supporting a layer of clay. Angle of fraction is 0. The struts are placed 3m center to center. a.) Determine the reaction of the strut at B. b.) Determine the section modulus of wale at B if the allowable bending stress is 0.6Fy where Fy = 250Mpa
A rectangular beam of length 702mm has a width of 132mm and a depth of301mm. Compression steel bars are placed at a distance 98 mm from the extreme concrete compressivefiber. The beam supports service dead loads of dead load (16 KN/m) and live load (24 KN/m). Reinforced with 4 25mm tension steel bars and 4 12mm tension steel bars f′c = 42 MPafy = 519 MPa 1. Solve for the height of the neutral axis measured from the extreme compression fiber.2. Solve for the design moment.3. Solve for the strength reduction factor.
A planned flexible load area (see Figure P7.2) is to be 3 m x 4.6 m and carries a uniformly distributed load of 180 kN/m2. Estimate the elastic settlement below the center of the loaded area. Assume that Df = 2 m and H = ∞ . Use Eqn 7.4
The simple beam carries a concentrated load P = 15kN. Dimension a and b are 2.5m and 1.2m. respectively. What is the required section modulus of the beam, in mm^3, if the stress is 120Mpa?
A box beam is constructed from four pieces of wood, glued together as shown. If the moment acting on the cross-section is 15 kN-m, determine the flexural stress in MPa at point A Where: tw = 24 mm; and d = 288 mm
Given: γ =17.5 kN/m3c = 30 kN/m2center-to-center spacing of struts in the plan = 5 m. Determine the factor of safety against bottom heave for the braced cut. Use Eq. (15.20) and assume the length of the cut, L 5 18 m. Use σ all = 170 MN/m2
A prestressed beam of a certain condominium was designed to have a rectangular section 300mm x 600mm deepand has a simple span of 9m. At the midspan section, the tendons are placed at 200mm above the soffit whichcarries an initial prestressing force of 1,110KN which ultimately relaxes to 880 KN. If the allowable stress inconcrete in compression is 13.5 MPa and in tension is 1.4MPa, determine the safe moment it could carry and thesuperimposed live load that it could also carry. Assume concrete will not crack in tension.
A simply supported rectangular beam of length 6.45m has a width of 437.5 and an effective depth of 692.5. The beam is to be reinforced using 12 mm bars. The f'c is 28 and the fy is 420. The beam supports service dead loads of 31 kN/m and 39.5kN/m., respectively. 1. Calculate the ultimate moment capacity of the beam. 2. Calculate the height of the equivalent stress block. 3. Determine the number of bars required for this beam
Q.6 ABCD is a raft foundation of a multi-story building [Fig. 2] wherein AB = 65.6 ft, and BC = 39.6 ft. The uniformly distributed load q over the raft is 73 10 lb/ft2. Determine Ôz at a depth of 9.7 ft below point O wherein AA, = 13.12 ft and A,0 = 19.68
Determine the prestressing force required for the precast concrete T-beam. Use the following data: Total moment = 250 kN-m Effective stress fse= 862 MPa Allowable concrete stress = f =11 MPa Consider zero stress at the bottom of the beam I=3673x106 mm A=103125 mm2 Eccentricity = 271.6 mm Centroid of steel is located at 100 mm from the bottom of the beam.
The channel section carries a uniformly distributed load totaling 6W and two concentrated loads of magnitude W. Determine the (a) location of the neutral axis from the bottom, (b) the moment of inertia about that axis, (c) the maximum allowable value for W if the working stress are 4.0 MPa in tension, 8.0 MPa in compression, and 2.4 MPa in shear.
Solve using method of consistent deformation; EI =4x10^6 KN m^2, L=3.0, Wo=20KN/m