standard vapor compression system produces 20 tons of refrigeration using r-12 while operating between a condenser temperature of 45 deg-C and an evaporator temperature of -25 deg-C. Determine the refrigerating effect per unit of refrigerant, circulation rate in kg/s, power supplied, COP, heat rejected in kW, the volume flow rate in L/s, and temperature at the compressor discharge. Please answer complet

standard vapor compression system produces 20 tons of refrigeration using r-12 while operating between a condenser temperature of 45 deg-C and an evaporator temperature of -25 deg-C. Determine the refrigerating effect per unit of refrigerant, circulation rate in kg/s, power supplied, COP, heat rejected in kW, the volume flow rate in L/s, and temperature at the compressor discharge. Please answer complet

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 2RQ: The operating condition for the single compressor in a household refrigerator is the lowest box...

See similar textbooks

Similar questions

Refrigerators currently being manufactured in the United States are using______as their refrigerant.
Condensers in these refrigerators are all_______cooled.
The operating condition for the single compressor in a household refrigerator is the lowest box temperature, which is typically A. 0F B. -20F C. 20F D. 40F
Welded ______sealed compressors are normally used in household refrigerators.
Referring to Problem 1.74, how many kilograms of ice can a 3-ton refrigeration unit produce in a 24-h period? The heat of fusion of water is 330 kJ/kg.
A standard vapor compression system produces 20 tons of refrigeration using R134a while operating between a condenser temperature of 45 deg-C and an evaporator temperature of -25 deg-C. Determine the refrigerating effect per unit of refrigerant, circulation rate in kg/s, power supplied, COP, heat rejected in kW, the volume flow rate in L/s, and temperature at the compressor discharge.
An R-12 refrigeration system using a single compressor serves three evaporators of 50, 30 and 20 tons capacity in parallel to each other with an evaporating temperatures of 0 C(hg = 351.447 KJ/kg), -5 C(hg = 349.321 KJ/kg) and -10 C(hg = 347.134 KJ/kg), respectively. If the condenser is maintained at 40 C(hf = 238.535 KJ/kg), compute the COP of the system. Enthalpy at the end of compression is at 378 KJ/kg.
An R-12 standard refrigeration cycle operates at an evaporating pressure of 386 kPa and a condensing pressure of 1009 kPa. Show the effects of decreasing the vaporizing pressure to 270 kPa on the following: For a unit mass, (a) refrigerating effect, (b) COP, and (c) work. For a refrigerating capacity of 1 kW, (d) power, (e) mass flow rate, (f) heat rejected, and (g) volume flow rate.
A two-evaporator, multiple EV,and multiple compression refrigeration system uses refrigerant-134a as the working fluid. The system operates evaporator 1 at 0°C, evaporator 2 at -26.4°C, and the condenser at 800kPa. The refrigerant is circulated through the compressor at a rate of 0.1kg/s and the low temperature evaporator serves a cooling load of 8 kW.Determine the cooling rate of the high-temperature evaporator, the power required by the compressor, and the COP of the system. The refrigerant is saturated liquid at the exit of the condenser and saturated vapor at the exit of each evaporator, and the compressor is isentropic.
A Freon 12 vapour compression system operating at a condenser temperature of 45oC and an evaporator temperature of 5oC develops 10 tons of refrigeration. Using the p-h diagram for Freon 12, determine. (a) the discharge temperature and mass flow rate of the refrigerant circulated. (b) the theoritical piston displacement of the compressor and piston displacement per ton of refrigeration, (c) the theoritical horsepower of the compressor and horsepower per ton of refrigeration, (d) the heat rejected in the condensor, (e) the carnot COP and the actual COP of the cycle
A two stage cascade refrigeration system uses R-12 in the high pressure loop with a condenser temperature of 300C and -100C in the cascade condenser, and R-22 in the low pressure loop with a temperature in the cascade condenser of 00C and an evaporator temperature of -30 0C. The refrigeration load is 28 tons. Given : h6 = 366 kJ/kg; h2= 421 kJ/kg Determine: 1) the mass flow rate in the low pressure loop in kg/s 2) mass flow rate in the high pressure loop, in kg/s 3) total power requirement in KW 4.) COP 5.) heat rejected in the condenser, KW 6.) amount of cooling water needed for a temp rise of 140C. in kg/s 7.) amount of ice (kg)for a 10 hrs operation if the initial temp of water is 31 0C to ice at -80C. Answe in kg.
A standard vapor compression system produces 70.4 kW of refrigeration using R-12as a refrigerant while operating between a condenser temperature of 42 °C and anevaporator temperature of –25 °C.2.1 Draw the p-h diagram of the cycle. 2.2 Determine:(a) the refrigerating effect in kJ/kg, (b) the circulating rate in kg/s, (c) the power supplied, (d) the COP, (e) the heat rejected in kW, and(f) the volume flow rate in m3/s.