The armature of a shunt generator has 0.05 ohm effective resistance. Each brush has an effective resistance of 0.01 ohm.. The terminal voltage is 100 volts while the current is 40 amperes . What is the efficiency? Since the data of the field windings are not given, assume the generator is separately excited? TL -QE V

The armature of a shunt generator has 0.05 ohm effective resistance. Each brush has an effective resistance of 0.01 ohm.. The terminal voltage is 100 volts while the current is 40 amperes . What is the efficiency? Since the data of the field windings are not given, assume the generator is separately excited? TL -QE V

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter29: Dc Generators

Section: Chapter Questions

Problem 18RQ: What is the voltage regulation of a DC generator proportional to?

See similar textbooks

Similar questions

What is the voltage regulation of a DC generator proportional to?
A short shunt compound DC generator supplies a load current of 10A at a voltage of 10 volts. If the resistance of armature, shunt field and series field windings are 0.001 ohm, 1 ohm 0.00 ohm respectively. a) Draw the the figure. And find the generated voltage.
A shunt generator has an output of 22 kW at a terminal voltage of 220 V. armature and shunt field resistances are 0.05 ohm and 44 ohms, respectively. If the copper loss is equal to the core, friction and windage losses at this load, the over-all efficiency of this generator is nearest to
Solve part d only A shunt connected generator supplies 220 V voltage to a 1.5 ohm load. Since the armature circuit resistance of the generator is 0.035 Ω and the excitation circuit resistance is 60 Ω: a. Draw the circuit connection diagram. b. Armature and load current c. The e.m.k. the value of D. Find the power produced by the Generator
A shunt generator has a field resistance of 120-16 π, When the generator delivers 8 kW, the terminal voltage is 110 V, while the generated EMF is 122 V, Determine: a) The armature resistance, and b) The generated EMF when the output is 3 kW at terminal voltage of 130 V.
A short shunt compound DC generator supplies a load current of 10A at a voltage of 10 volts. If the resistance of armature, shunt field and series field windings are 0.001 ohm, 1 ohm 0.00 ohm respectively. c) write down the factors to improve the generated voltage.
7) The flux per pole of a four-pole generator is 0.05 wb. It driven at a speed of 1500 rpm. In order to have an induced emf of 20 v per conductor, , if the winding is lap-connected, find (a) the number of conductors in series in each parallel path, (b) the number of conductors between brushes to generate 240 v, and (c) the total number of conductors in the armature.
An 8-pole lap wound d.e shunt generator has 120 slots with 4 conductors per slot. If each conductor can carry 250 A and flux per pole is 50 mWb. Find the speed so that it gives 240 V on open circuit. If terminal voltage of the generator drop to 220 on full load, find the armature resistance.
5. A 4-pole, d.c. shunt generator with a shunt field resistance of 100 Ω and an armature resistance of 1 Ω has 378 wave-connected conductors in its armature. The flux per pole is 0.02 Wb. If a load resistance of 10 Ω is connected across the armature terminals and the generator is driven at 1000 r.p.m., calculate the power absorbed by the load.
The output of a shunt generator is 66 A at 100 volts. Armature and field resistances are, respectively, 0.04 ohm and 25 ohms. If the efficiency at this load is 88%, determine the core and friction losses
The armature of a 12 pole DC shunt generator has 50 slots and is wave wound with 12 conductors per slots. The generator is running at a speed of 625 rpm and supplies a resistive load of 15 ohms at a terminal voltage of 300V. The armature resistance is 0.5 ohms and field resistance is 60 ohms. Find the armature current, the generated EMF and the flux per pole.
An eight-pole DC shunt generator supplies a load of 12.5 ohm at 250 V. Its armature carries wave connected 778 conductors and its armature and field winding resistances are 0.24 ohm and 250 ohm respectively. Find the armature current, the induced emf and the flux per pole. Assume the generator runs in 500 rpm.