The curved surface given in the figure is defined by y = 3 x−−√x . Determine the horizontal force and its line of action applied by water on the curved surface. The width of the gate is b = 2.3 m. Take the density of water to be 1000 kg/m3. Height of the water is 5 m

The curved surface given in the figure is defined by y = 3 x−−√x . Determine the horizontal force and its line of action applied by water on the curved surface. The width of the gate is b = 2.3 m. Take the density of water to be 1000 kg/m3. Height of the water is 5 m

Name: The curved surface given in the figure is defined by y = 3 x−−√x . Det
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: The curved surface given in the figure is defined by y = 3 x−−√x . Determine the horizontal force and its line of action applied by water on the curved surface. The width of the gate is b = 2.3 m. Take the density of water to be 1000 kg/m3. Height of

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

The curved surface given in the figure is defined by y = 3√x. Determine the horizontal force and its line of action applied by water on the curved surface. The width of the gate is b = 2 m
Fluid with a density of 900 kg/m^3 is applying pressure on the gate shown. The depth of the water is equal to the height of the gate. The h is 12 m and width of the gate is 4 m. Determine the location of the line of action of the resultant force with respect to free surface? a)3 m b)8 m c)6 m d)10 m e)4 m
A tank contains a liquid of relative density 0.80. The height of the tank is 4, and the width of the tank is 2m. The tank is subjected to the acceleration of 5m/s^2 along a 30o inclined plane in the upward direction. Under this condition, there is no loss of liquid. determine the slope of free surface determine the pressure at point A and point B
A cast iron pipe (roughness =0.26 mm or 0.010 inches) having a diameter of 100 mm is used to fill the empty cylindrical tank with water at 40 degree C. If the power output of the pump is 4.5 kW, determine the depth of h in water in the tank 6 minutes after the pump is turned on. The pipe has a total length of 50 m. Neglect minor losses.
The water pressure acting on a masonry dam varies as shown. If the dam is 20 ft wide, determine the result.
Fluid with a density of 900 kg/m^3 is applying pressure on the gate shown. The depth of the water is equal to the height of the gate. The h is 12 m and width of the gate is 4 m. Determine the resultant pressure force acting on the gate? a)1611315 N b)5084000 N c)2542000 N d)52958 N e)105916 N
A 3-ft-diameter vertical cylindrical tank open to the atmosphere contains 1-ft-high water. The tank is now rotated about the centerline, and the water level drops at the center while it rises at the edges. Determine the angular velocity at which the bottom of the tank will first be exposed. Also determine the maximum water height at this moment.
Determine the pressure of the water in Pipe A if the gage pressure of the air in the tank is 2 psi. (Hydrostatic)
The field storage tank is filled with oil to the level shown. The stand pipe is connected to the tank at B and open to the atmosphere at C. Determine the maximum pressure in the tank and the pressure of the trapped air in the tank (space A) if the water rises to a level h = 8 m in the stand pipe. *The answer should be 58.86 kPa* Explain the computation
plzzzzzzz help What is the minimum Block mass (kg) that is required to open the gate A-B? The density of water is 1000 kg/m3 and the density of the block is 8000 kg/m3. The specific gravity of oil is 0.9. The depth of the gate is not required. The external force that effects the gate at point A is Fe=3000 N, while the hydrostatic force Fh=9313.8 N
a pressure gage is attached to the pump and reads 85 kPa. If the atmospheric pressure is 29.9 Hg, determine the absolute pressure of the water pumped?
The gauge pressure of the air in the tank shown in the figure is measured to be 56 kPa. Determine the differential height h of the mercury column.