The cylinder of a portable hydraulic riveter is 220 mm in diameter. The pressure of the fluid is 14 N/mm2 by gauge. Determine suitable thickness of the cylinder wall assuming that the maximum permissible tensile stress is not to exceed 105 MPa. Assume material of cylinder as Steel.

The cylinder of a portable hydraulic riveter is 220 mm in diameter. The pressure of the fluid is 14 N/mm2 by gauge. Determine suitable thickness of the cylinder wall assuming that the maximum permissible tensile stress is not to exceed 105 MPa. Assume material of cylinder as Steel.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.3.1P: A fire extinguisher tank is designed for an internal pressure of 825 psi. The tank has an outer...

See similar textbooks

Related questions

Q: A metal plate 10 mm thick at 30°C is suddenly expose heat flux of 3000 W/m2 and the other side is ex...

A: Thickness t=10mmt=30°CHeat flux=3000W/m2Heat transfer coefficient =50W/m2kDensity=8933kg/m3Specific ...

Q: What is the energy loss over a gradual contraction from a DN125 Schedule 40 steel pipe to a DN50 Sch...

Q: 29. Obtain the average temperature difference for the laminar flow of fluids over a heated plate (L ...

A: Write the expression of Nusselt number. Nux=0.453Rex1/2Pr1/3Nu=0.680ReL1/2Pr1/3

Q: A simple saturated refrigerating cycle using R-12 as refrigerant operates at an evaporating temp. of...

A: Given data, Refrigerant is R-12 Evaporating temperature, Tevp = -5 °C Condenser temperature, Tcond =...

Q: What is the Effective Hanging Mass of the spring? Hanging mass = .01kg Position of Coil = .6375m per...

A: Given Data Hanging mass: ms=0.01 kg Position of Coil = 0.6375 m period for 1 oscillation = 0.674 s ...

Q: For the vectors Shown, analytycally determine the resultant and direction. R = A + B

Q: An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression process, air i...

Q: single square-thread screw has an input power of 3 kW at a speed of 1 rev/s. The screw has a diamete...

Q: A venturi meter with a throat diameter of 6 cm is fitted in a horizontal pipeline of 12 cm diameter ...

Q: evaluate the irreversibility

A: Given; During expansion, heat transfer from air to the surrounding at 300 K Or,Air expands steadily...

Q: As shown in figure below, a 100 lb body moves along the two inclines for which the coefficient of fr...

Q: Determine the force in members GH, GB, and BC, and state whether each of these three members is in t...

Q: 2. A 200 kg motoreycle accelerates from 0 to 55 mi /hr in 5.0 s. (a) What is the magnitude of the mo...

Q: A cubical block of wood 13 cm on an edge weighing 20 N floats in water (9810 N/ cubic meter). If it ...

Q: Two previously undeformed cylindrical specimens of an alloy are to be strain hardened by reducing th...

Q: It is desired to develop a total power 223,800 kW in a hydroelectric plant under a head of 15 m and ...

A: Giventotal power requires to developP=223800kWH=15mN=60rpmNs=80 rpm

Q: For the system illustrated in the figure, determine the value of "h" that puts the system un equilib...

A: Find the value of h to system in un equilibrium.

Q: Please calculate the sound pressure level, in dB, of a noise with a sound pressure of 0.9

Q: The system shown below is released from rest. Determine the acceleration of mass A. (Hint: start by ...

Q: Which properties are affected by plastically deforming a metal specimen near room temperature? Do th...

A: Concept: Plastic Deformation: 1) It is the process of deforming the material by application of exter...

Q: 2.If the pulleys are weightless and frictionless, determine the acceleration of each weight. C 45 kg...

Q: What is the horizontal component of F1 = 60N at 220°

A: Given data: F1=60 Nθ=220° Need to determine the horizontal component of the force.

Q: ɴᴀᴍᴇ ᴛʜᴇ ᴘᴀʀᴛꜱ ᴏꜰ ʜᴏʀɪᴢᴏɴᴛᴀʟ ᴄᴇɴᴛʀɪꜰᴜɢᴀʟ ᴘᴜᴍᴘ. and ᴡʜᴀᴛ ᴀʀᴇ ᴛʜᴇ ᴄᴜʀᴠᴇ ᴛʜᴀᴛ ᴀʀᴇ ɴᴏʀᴍᴀʟʟʏ ᴠɪꜱɪʙʟᴇ ᴏɴ ᴀ...

A: Horizontal centrifugal pump :

Q: QI/For flow over a flat plate with an extremely rough surface, convection heat transfer effects are ...

Q: (2) A diesel engine developing 1,850 hp at 105 rpm is used on a ship to drive the propeller. The sha...

A: (a) Calculate the torque applied on the shaft. P=TωT=Pω=P2πN60=1850 hp746 W1 hp2π105 rpm60=125514.13...

Q: B, G1 G2 W1, a1 C

A: Given : To find : Moment equilibrium equation

Q: Water flows upwards in a vertical pipeline of gradually varying section from point 1 to point 2, whi...

Q: Due to slipping, points A and B on the rim of the disk have the velocities va = 7.2 ft/s and vg = 14...

Q: 5 Second conditional T82 Rewrite the sentences with the second 1 I can't take you to the airport bec...

A: Hi and thank you for the questions. We are authorized to answer three subparts at a time, since you ...

Q: To find the width of a river, a surveyor sets up a transit at point C on one riverbank and sights di...

Q: Explain the differences in grain structure for a metal that has been cold worked and one that has be...

A: INTRODUCTION Cold working : Cold working is the most common way of reinforcing metals through plasti...

Q: The crystal structure of austenite is?

A: It is required to state the crystal structure of austenite phase.

Q: 1. If F, = 600 N and ø = 30°, determine the magnitude of the resultant force acting on the eyebolt a...

A: As per given question We have to determine magnitude and results force of given fig

Q: F10-2. Determine the moment of inertia of the shaded area about the x axis. And y Mura

Q: d the frequency of transverse vibrations of a shaft which is simply supported at the ends and mm in ...

Q: A venturi meter with a throat diameter of 100 mm is fitted in a vertical pipeline of 200 mm diameter...

Q: A bearing piece in the form of half of a hollow cylinder of 60 mm ID, 90 mm OD and 100 mm long is to...

Q: N, what is the demand facto

A: Option b) is correct.

Q: 1- What is the benefit of the epicyclic gear train? Name s ome applications?

A: Epicyclic gear train :

Q: A weight of W Ib is suspended from a vertical spring (as shown in the figure) whose modulus is k Ib/...

Q: Determine the moment generated by the force F with the lever arm r, M=r x F r=1.9 i + 0.9 j F=57 i...

Q: As you increase the carbon content of steels from 0.1% to 1.0% you would expect: strength to increas...

Q: A frame is made up of three identical members. Joints B and D are rigid, while point A is recessed. ...

Q: 2. A 200 kg motorcycle accelerates from 0 to 55 mi /hr in 5.0 s. (a) What is the magnitude of the mo...

Q: 1. YES OR NO Is the location of the piercing point, correct? Is the visibility of the piercing line ...

A: given; location of piercing point? visibility of piercing line?

Q: when the potential energy of a conservative system increases, the kinetic energy _______ a. does...

A: The stored energy that is determined by the relative positions of various pieces of a system is k...

Q: What would happen if you do not put any lubricant in a moving machine element? In what situation is ...

Q: Hall-Petch Constants Material Y; (MPa) k (MPa.ma) Copper 25 0.12 Titanium 80 0.40 Mild Steel 70 0.74...

Q: Each of the cables can sustain a maximum tension of 5000 lb. The uniform beam has a weight of 4200 l...

Q: Calculate the actual work done on the 200 g mass using W = mgh. Be careful to use only the change i...

A: To given thatmass,m=200g=0.2KGwork to lift 200gm mass to height 'h'W=mgh

Concept explainers

Pressure Vessels

The term pressure vessel refers to a closed container that contains gas or liquid at a different pressure than environment pressure. The pressure vessels have a wide scale of applications in our day-to-day lives and other industrial places. Some common examples of pressure vessels are gas cylinders, autoclaves, compressor vessels, etc.

Question

100%

The cylinder of a portable hydraulic riveter is 220 mm in diameter. The pressure of the fluid is
14 N/mm2 by gauge. Determine suitable thickness of the cylinder wall assuming that the
maximum permissible tensile stress is not to exceed 105 MPa.
Assume material of cylinder as Steel.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Repeat the previous problem using ? = 50° and stresses on the rotated element: sy1= 70 MPa, ??y1=-82 MPa, and tx1y1=-35 MPa.
The hollow drill pipe for an oil well (sec figure) is 6,2 in. in outer diameter and 0.75 in. in thickness. Just above the bit, the compressive force in the pipe (due to the weight of the pipe) is 62 kips and the torque (due to drilling) is 185 kip-in. Determine the maximum tensile, compressive, and shear stresses in the drill pipe.
A prismatic bar with a length L = 3 ft and cross-sectional area A = 8 in2 is compressed by an axial centroidal load P = 10 kips. Determine the complete state of stress acting on an inclined section pq that is cut through the bar at an angle W = 35", and show the stresses on a properly oriented stress element.
A fire extinguisher tank is designed for an internal pressure of 825 psi. The tank has an outer diameter of 4.5 in. and thickness of O.OS in. Calculate the longitudinal stress, the circumferential stress, and the maximum shear stresses (out-of-plane and in-plane) at the outer surface of the tank.
Solve the preceding problem if F =90 mm, F = 42 kN, and t = 40°MPa
- A specimen used in a coupon test has norm al stress ??. = 15 MPa (see figure). Using Mohr’s circle, find the state of stress on the element oriented at angle ? = 20° and show the full stress state on a sketch of a properly oriented element.
41.) A cylindrical steel pressure vessel 400 mm in diameter with a wallthickness of 20 mm, is subjected to an internal pressure of 7.875 MPa. Towhat value may the internal pressure be increased if the stress in the steelis limited to 100 MPa?
A seamless cylinder of storage capacity of 0.03m3 is subjected to an internal pressure of 21 MPa. The allowable stress in the material of cylinder is 350N/mm².Determine the length of the cylinder if it is twice the diameter of the cylinder
Topic: MACHINE DESIGN A submersible cylinder used in research has a cylindrical pressure hull of outside diameter 3.0 m and a wall thickness of 150 mm. It is constructed of an aluminum alloy, having a yield point of 450 MPa. Determine the tangential stress, in terms of MPa, in the cylindrical portion of the pressure hull whenthe vehicle is at its operating depth of 5500 m below the surface of the sea. Consider sea water to have a specific weight of 104 N/m3
The thick walled cylinder of a hydraulic system is acted by a hydraulic pressure of 370 psi while themaximum load of the piston is 5500 lbs. If the allowable tensile stress is 2 ksi, find the required wallthickness of the cylinder.
A circular cross section cylinder containing oil, has an internal bore of 30cm diameter. The cylinder is 1cm thick If tensile stress in the cylinder must not exceed 75MPa, maximum load P which may be supported on piston sliding in the cylinder is
A cylindrical pressure vessel is fabricated from steel plating that has a thickness of 30 mm. The outer diamter and thickness of the pressure vessel is 500 mm and 10 mm. Its length is 2m. Determine the maximum internal pressure (MPa) that can be applied if the longitudinal stress is limited to 155 MPa, and the circumferencial stress is limited to 55 MPa.