The horizontal force P = 67 N is applied to the upper block with the system initially stationary. The block masses are ma = 13 kg and mg - 7 kg. Determine the magnitudes of the frictions forces F1 (between block A and the ground) and F2 (between blocks A and B) for the following conditions on the coefficients of static friction: (a) µ1 = 0.40, µ2 = 0.37 and (b) µ1 = 0.26, µ2 = 0.48. Assume that the coefficients of kinetic friction are 71 percent of the static values. 20° Answers: (a) F1- N F2 = i N i (b) F1- N F2- i N

The horizontal force P = 67 N is applied to the upper block with the system initially stationary. The block masses are ma = 13 kg and mg - 7 kg. Determine the magnitudes of the frictions forces F1 (between block A and the ground) and F2 (between blocks A and B) for the following conditions on the coefficients of static friction: (a) µ1 = 0.40, µ2 = 0.37 and (b) µ1 = 0.26, µ2 = 0.48. Assume that the coefficients of kinetic friction are 71 percent of the static values. 20° Answers: (a) F1- N F2 = i N i (b) F1- N F2- i N

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A tank used to collect rainwater having diameter of 4m .the depth of the tank varies linearly from 3.5m at its center to 3m along the perimeter.the local atmospheric pressure is 1bar ,the acceleration of gravity is 9.8mS square and the density of the rainwater is 987.1kg/m3. When the tank is filled with water,determine a) the pressure in kPa at the bottom center of the tank b)the total force in kN,acting on the bottom of the tank
A minimum force of P = 50 lb is required to hold the cylinder from slipping against the belt and the wall. Determine the weight of the cylinder if the coefficient of friction between the belt and cylinder is μs = 0.3 andslipping does not occur at the wall.
An equilateral triangular plate of side 2.4m placed horizontally in a liquid (sp. gr. 0.80) in such a way that the center of the plate is 2.5m below the free surface of water. (a) Determine the area (in sq. meters) of the plate. (b) Determine the magnitude (in kN) of the resultant force on the plate.
Determine the minimum force P to prevent the 30-kg rod AB from sliding. The contact surface at B is smooth, whereas the coefficient of static friction between the rod and the wall at A is μs = 0.2.
Determine the reaction at the smooth wall. The top of the 15-kg ladder is leaning against a very smooth vertical wall. Assume that the mass center of the painter is directly above his feet and that the coefficient of friction between the horizontal ground and the ladder is 0.25.
An equilateral triangle plate of side 2.4 m placed horizontally in a liquid (sp. gr. =0.80) in such a way that the center of the plate is 2.5 m below the free surface of water. a. Determine the area (in sq.meters) of the plate b. Determine the magnitude of the resultant force on the plate.
If A = 1 kg, B = 2 kg, C = 801 kg, and the static of coefficient friction is equal to 0.04. Determine the normal force exerted by the horizontal plane to Block B. Find the force F required to start C moving upward. Nb = Blank 1 N F = Blank 2 N
In the cage system below; It is under the effect of a P=250 kN load acting at an angle of θ=30° from the point C. Calculate the horizontal displacement (cm) to the right at point C. (E=2000 kN/cm² and A=50 cm² will be taken for all bars.)
The uniform 20-lb ladder rests on the rough floor for which the coefficient of static friction is μs = 0.4 and against the smooth wall at B. Determine the horizontal force P the man must exert on the ladder in order to cause it to move.
The block A and the wedge B weighs 100 kN and 40 kN, respectively. The coefficient of fritction for all contacting surfaces is µ = 0.268. Determine the following: a. What value of P in kN would be required to push to the right the wedge under the block? b. What value of P in kN would be required to pull to the left the wedge under the block? Assume the block A is stll in contact with the wall just as motion starts.
Fluid Mechanics Problem 1) A rectangular gate 3 meters high and 1.2 meters wide is hinged at the top. A force to keep the gate closed is applied at the bottom with an angle of 45 degrees with the veritcal. Compute the following if the water surface is 0.9 meters below the top of the gate. Use 9.81kN/m^3 as water's specific weight. a. the total hydrostatic force acting on the gate in kN. b. the distance of the total hydrostatic force measured from the liquid surface in meter. c. the magnitude of the force at the bottom of the gate in kN. 2) Use 9.81kN/m^3 as water's specific weight. Consider the rectangular gate shown in the figure. If the gate has a length of 2 meters, determine: a. the force exerted by the water on the left side of the gate in kN. b. the force exerted by the water on the right side of the gate in kN. c. the horizontal force at B required to turn the gate about the hinge in kN.
The uniform 10-kg ladder in attached figure rests against the smooth wall at B, and the end A rests on the rough horizontal plane for which the coefficient of static friction is ns = 0.3. Determine the angle ofinclination theta of the ladder and the normal reaction at B if the ladder is on the verge of slipping. SHOW COMPLETE SOLUTION AND ILLUSTRATION FINAL ANSWER IN 3 DECIMAL PLACES