The load on a 120V, 60 Hz supply is 5 kW (resistive), 8 KVAR (inductive), and 2 kVAR (capacitive).Calculate the current power factorpf =Calculate the total current before power factor correctionITbefore =unitslagging, leading, or unityFor Blank 4If its desired for the power factor to be improved to 0.90 lagging, how much capcitive reactive power needsto be supplied to the network?Qneed=TafterCalculate the total current after power factor correctionunits=units

Asked to find the following,Note: “Since you have posted question with multiple sub parts, we will…

The load on a 120V, 60 Hz supply is 5 kW (resistive), 8 kVAR (inductive), and 2 kVAR (capacitive). Calculate the current power factor pf = lagging, leading, or unity Calculate the total current before power factor correction ITbefore= units For Blank 4 If its desired for the power factor to be improved to 0.90 lagging, how much capcitive reactive power needs to be supplied to the network? Qneed = units Calculate the total current after power factor correction | Tafter = units

The load on a 120V, 60 Hz supply is 5 kW (resistive), 8 kVAR (inductive), and 2 kVAR (capacitive). Calculate the current power factor pf = lagging, leading, or unity Calculate the total current before power factor correction ITbefore= units For Blank 4 If its desired for the power factor to be improved to 0.90 lagging, how much capcitive reactive power needs to be supplied to the network? Qneed = units Calculate the total current after power factor correction | Tafter = units

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.48P

See similar textbooks

Similar questions

Figure 2.26 shows three loads connected in parallel across a 1000-V(RMS),60Hz single-phase source. Load 1: Inductive load, 125kVA,0.28PF lagging. Load 2: Capacitive load, 10kW,40kvar. Load 3: Resistive load, 15kW. (a) Determine the total kW, kvar, kva, and supply power factor. (b) In order to improve the power factor to 0.8 lagging. a capacitor of negligible resistance is connected in parallel with the above loads. Find the kvar rating of that capacitor and the capacitance in F. Comment on the magnitude of the supply current after adding the capacitor.
Three loads connected in parallel across a 1000-V (RMS), 60-Hz single-phase source.Load 1: Inductive load, 125 kVA, 0.28PF laggingLoad 2: Capacitive load, 10 kW, 40 kVARLoad 3: Resistive load, 15 kWa) Determine the total kW, kvar, kva, and supply power factor.b) In order to improve the power factor to 0.8 lagging, a capacitor of negligible resistance isconnected in parallel with the above loads. Find the KVAR rating of that capacitor and thecapacitance in μf .c) Comment on the magnitude of the supply current after adding the capacitor
The following information is given in connection with three loads that are connected in parallel to a 230 volts ac line. Load 1: 4.6KW at unity power factorLoad 2: 11.5KVA at lagging power factor of 0.62Load 3: 5.52KW at leading power factor of 0.8 Calculate the:a. Total currentb. Overall power factor c. Total power d. Total reactive power e. Draw the phasor diagram of the current
Two balanced Y-connected loads in parallel, one drawing 15 kW at 0.6 power factor lagging andthe other drawing 10 kVA at 0.8 power factor leading, are supplied by a balanced, three-phase,480-volt source.d. ∆-connected capacitors are now installed in parallel with the combined load. Whatvalue of capacitive reactance is needed in each leg of the ∆ to make the source powerfactor unity? Give your answer in W.e. Compute the magnitude of the current in each capacitor and the line current from thesource
please solve this question with complete solution : A 50 Hz, 250 V single phase power line has the following loads placed across it in parallel; 4 kW ata pf of 0. 8 lagging; 6 kVA at a pf of 0.6 lagging; 5 kVA which includes 1.2 kVAR leading. Determinethe overall pf of the system and the capacitance of the capacitor which, if connected across themains restore the power factor to unity.
The load on a 120-V, 60 Hz supply is 5KW (resistive), 8 KVAR (inductive), and 2 KVAR (capacitive). Find the following: a) total kilovolt-amperes, b)power factor of the combined loads, c) current drawn from the supply, d) capacitance needed to establish unity power factor, e) capacitive reactance needed to establish unity power factor, f) the current drawn from the supply at unity p.f.
Problem : The power supply in the diagram below provides 40 kW at a power factor of 0.9 leading. The active power loss and reactive power loss on the transmission line are 1.6 kW and 2.1 kvar, respectively. Calculate the load voltage, as well as the active and reactive power at the load. Answer given : VL=416.83∠(-162°) V, PL=38.4 kW, QL=17.27 kvar.
Design a power factor correction circuit with the value of parallel capacitance needed tocorrect a load of 179 kVAR at 0.85 lagging pf to unity pf. Assume that the load issupplied by a 110-V (rms), 60-Hz line.
An industrial load of200KW has a powerfactor of 0.5 lagging. Agroup of synchronousmotors operating at apower factor of 0.8leading is installed andthe over-all power factorimproves to 0.75 lagging.Determine the KVArating of the synchronousmotors installed.Answer = 130.2354 KVA
A substation rated 1250 kVA is operating at full-load at 0.8 pf lagging and to carry anadditional load of 170 kW at 0.85 pf lagging. With the mentioned power factor, thesubstation is experiencing inefficient electrical system: high power losses, high voltagedrops in the electrical equipment, and high electricity bill. To reduce power losses and toreduce the electricity bill, power factor correction is to be of high importance andconsideration. With this condition, the substation is considering of two alternatives namely:Alternative A: To increase the capacity of the substationAlternative B: To add shunt power capacitor In this regard, the owner requested to prepare a summary report consisting of thefollowing details: additional substation capacity in kVA
A resistor R and an impedance coil Z are connected in series. The combination is supplied bya 120-volt, 60 Hz AC source. The voltage across R and Z are 70 volts and 80 volts,respectively. The entire circuit consumes 1,153.12 inductive vars. Determine the following: e. Inductance of the impedance coilf. Value of resistance Rg. Total real power drawn from the sourceh. Apparent power of the entire circuiti. Overall power factor
A 50 Hz, 250 V single phase power line has the following loads placed across it in parallel; 4 kW ata pf of 0. 8 lagging; 6 kVA at a pf of 0.6 lagging; 5 kVA which includes 1.2 kVAR leading. Determinethe overall pf of the system and the capacitance of the capacitor which, if connected across themains restore the power factor to unity.