very strictly saying I will report if post existing and incorrect ans if you are 100% sure then answer else skip Block Address : 192.168.16.0/24LAN1Usable #of Hosts: 100 UsersNetwork Address: ?Pont to Point LinkPoint to Point LinkWAN1WAN2Usable #of Hosts: 2 UsersUsable #of Hosts: 2 UsersLAN3 :LAN2 :Usable #of Hosts: 25Usable #of Hosts: 50Network Address; ?Network Address: ?The network given in the above figure consists of three local area networks andtwo wide area networks are connected with two serial links. With an ID range192.168.16.0/24, design an IP plan for this network. Find the network address andbroadcast address, and subnet mask for each network.

Answered: The network given in the above figure…

The network given in the above figure consists of three local area networks and two wide area networks are connected with two serial links. With an ID range

Fundamentals of Information Systems

9th Edition

ISBN:9781337097536

Author:Ralph Stair, George Reynolds

Publisher:Ralph Stair, George Reynolds

Chapter4: Networks And Cloud Computing

Section: Chapter Questions

Problem 8SAT

See similar textbooks

Similar questions

Assume a client is connected to the server and has already received an HTML webpage. It reads the webpage, and it now needs to get 3 new files, File A is 5 MB file B is 1 MB and file C is 1 KB. The client requests the files in the order A B C. The link has an RTT (round trip time) of 0.5 seconds and a bandwidth of 8 Mb/s(Megabits per second) (or 1 Megabyte per second). The client can reuse the open connection if the protocol allows it to. For all parts of this problem ignore header sizes, and start the timer when the client sends How long does it take to get file C under HTTP 0? How long does it take to get file C under HTTP 1 (assume the browser does not support pipeling)? How long does it take to get file C under HTTP 2 assuming a frame size of 1 KB and no server push? What event would make HTTP 3 faster than HTTP 2 for this use case (ignore TLS)?
Transcribed Image Text 2. You are required to design IP addressing scheme for the Pantai Siring's branch for all floors using VLSM subnetting. You may use any private IP address class (10.0.0.0 to 10.255.255.255, 172.16.0.0 to 172.31.255.255 or 192.168.0.0 to 192.168.255.255). User group are as follows: a. Ground Floor- Administrator – 10 hosts b. 1* Floor - Lecturer – (Based on the last 2 digits of your Matric Number) For Example: B031910402 – 2 hosts only c. 2nd Floor - Student – 250 hosts d. 3rd Floor - Management – 80 hosts Explain in steps the calculations of your IP addressing scheme.
Obtain the HTTP/1.1 specification (RFC 2616). Answer the following questions: a. Explain the mechanism used for signaling between the client and server to indicate that a persistent connection is being closed. Can the client, the server, or both signal the close of a connection? b. What encryption services are provided by HTTP? c. Can a client open three or more simultaneous connections with a given server? d. Either a server or a client may close a transport connection between them if either one detects the connection has been idle for some time. Is it possible that one side starts closing a connection while the other side is transmitting data via this connection? Explain.
A network configuration of a modem is given as following:LTE interface IP = 77.110.156.22 MASK 255.255.252.0Default GATEWAY = 77.110.156.1Masquerade NAT, and DNS address = 1.1.1.1Local IP setup: 192.168.128.1 MASK 255.255.255.0And, ip route 192.168.128.0 255.255.252.0 192.168.128.254 Devices numbered R1, R2, R4, R5 are routers. PC is a computer.Image of network with interface names such as f1/0 are added. You must use only static IP addreses and static IP routes to configure the network and make PC able to connect (ping) to Modem.
Suppose the network layer provides the following service. The network layer in the sourcehost accepts a segment of maximum size 1,200 bytes and a destination host address from thetransport layer. The network layer then guarantees to deliver the segment to the transport layerat the destination host. Suppose many network application processes can be running at thedestination host In your protocols, does the transport layer “have to do anything” in the core of the computer network?
A ______ address is defined as a reserved address that routes packets back to the host. what is it? fill in the blank
Find the class of the following two IP addresses (both are classful addresses),as well as their netid and hostid: a. 104.37.3.6 b. 208.34.54.12
Number of needed subnets: 1000 Number of needed usable hosts: 60 Network adress: 165.100.0.0 Fill the blanks: Adress class _________Default subnet mask __________ Custom subnet mask ____________ Total number of subnets _________ Total number of host adresses _________ Number of usable adresses _______Number of bits borrowed __________
60- A network for a local office requires 4 LAN subnets as follows: · Subnet A - North Office with 31 hosts; · Subnet B - East Office with 15 hosts; and · Subnet C - South Office with 7 hosts. · Subnet D – West Office with 4 hosts. Given the IP Address 192.168.15.0 /24 and above described network requirements: 1. Design an optimal address scheme using Variable Length Subnet Mask (VLSM) method; What will be the range of usable (assignable) host addresses in Subnet D? Select one: A. 192.168.15.224 to 192.168.15.255 B. 192.168.15.113 to 192.168.15.118 C. 192.168.15.192 to 192.168.15.254 D. 192.168.15.193 to 192.168.15.240 E. 192.168.15.192 to 192.168.15.239
A network switch is used to create a LAN with 5 hosts (host1, host2, ...host5). How will the following scenarios be handled by the switch (i) Host1 sends two consecutive frames to host3 after which host3 sends two consecutive frames to host1 (ii) all five hosts transmit their frames at the same time to destination hosts 2,3,4,5,1 respectively. Explain
Suppose the network layer provides the following service. The network layer in the sourcehost accepts a segment of maximum size 1,200 bytes and a destination host address from thetransport layer. The network layer then guarantees to deliver the segment to the transport layerat the destination host. Suppose many network application processes can be running at thedestination host Modify this protocol so that it provides a “return address” to the destination process.
A Network switch is used to create a LAN with 5 hosts (host1, host 2, ….host5). How will the following scenarios be handled by the switch (i) Host 1 sends two consecutive frames to host 3 after which host 3 sends two consecutive frames to host 1 (ii) all five hosts transmit their frames at the same time to destination hosts 2,3,4,5,1 respectively.