the number of available addresses on a network by the Supernetting hosts ID. 16 Choose one a. Decreases, Increasing answer. b. Decreases, Decreasing c. Increases, Increasing d. Increases, Decreasing A DHCP server is used to assign IP addresses dynamically to the hosts on a network. The address pool is configured with 192.168.10.0/24. There are 3 printers on this network that need to use reserved static IP addresses from the pool. How many IP addresses in the pool are left to be assigned to other hosts? 17 Choose one а. 254 answer. b. 253 С. 251 d. 252 18 If the fragment offset has a value of 100 (in raw byte form), it means that: Choose one a. The datagram is 100 byte in size answer. b. The datagram has not been fragmented c. The first byte of the datagram is byte 800 d. The first byte of the datagram is byte 100

the number of available addresses on a network by the Supernetting hosts ID. 16 Choose one a. Decreases, Increasing answer. b. Decreases, Decreasing c. Increases, Increasing d. Increases, Decreasing A DHCP server is used to assign IP addresses dynamically to the hosts on a network. The address pool is configured with 192.168.10.0/24. There are 3 printers on this network that need to use reserved static IP addresses from the pool. How many IP addresses in the pool are left to be assigned to other hosts? 17 Choose one а. 254 answer. b. 253 С. 251 d. 252 18 If the fragment offset has a value of 100 (in raw byte form), it means that: Choose one a. The datagram is 100 byte in size answer. b. The datagram has not been fragmented c. The first byte of the datagram is byte 800 d. The first byte of the datagram is byte 100

A+ Guide to Hardware (Standalone Book) (MindTap Course List)

9th Edition

ISBN:9781305266452

Author:Jean Andrews

Publisher:Jean Andrews

Chapter8: Connecting To And Setting Up A Network

Section: Chapter Questions

Problem 2TC

See similar textbooks

Similar questions

Add a DHCP server to the network with network ID of 223.12.12.0/24. Configure the DHCP server so that it provide IP addresses to all the PCs inside all the subnetworks. Describe step by step process of the DHCP configuration and add screenshot of successful DHCP calls from PC3,PC4,PC5.
Godwin Pharmaceuticals has a private web server for its corporate network that runs on a Linux operating system. A.You have been contacted to make its network remotely accessible to the IT department so that the IT department can have secure access to the workstations and, at the same time, the transmissions remain encrypted. Which of the following protocols would you apply so that the employees can have secured remote access to the computer server? 1.SSH 2.Telnet 3.RDP 4.POP3
1. Using NAT local netwerk can just use one IP address as far as outside world is concerned. What are the other uses of having NAT?a. it can change addresses of devices in local network without notifying outside world and change ISP without changing addresses of devices in local network.b. its range of addresses is not needed from ISP, just one IP address for all devices.c. with NAT devices inside local net not explicity addressable, visible by outside worl (a security plus)d. all other three answers are correct. 2. virtual circuit in the network layer consists of b. network layerc. none of the other answersd. transport layere. physical layer 3. what is the broadcast address of the network 172.16.104.0.255.255.254.0?a. 172.17.106.255b. 172.16.104.255c. 172.16.105.255d. 172.16.101.1 4. network differs to the transport layer in their connection service?a. network works between multiple hosts while transport works between two processes.b. network works between two host (may also involve…
Dont copy from any other source or internet I Will Surely downvote answer only if you have accurate knowledge otherwise dont answer other wise will receive surely downvote Host A (with IP address 192.168.0.10) wants to communicate with Host B (with IP address 192.168.20.2). If the subnet mask for Host A is 255.255.255.0, will the hosts communicate using local transmissions or will they send information to the default gateway? Show the workings for the ANDing process below. Host A (with IP address 192.168.0.10) wants to communicate with Host B (with IP address 192.168.20.2). If the subnet mask for Host A is 255.255.255.0, will the hosts communicate using local transmissions or will they send information to the default gateway? Show the workings for the ANDing process below. Source IP Source Subnet Mask AND Result Destination IP Source Subnet Mask AND Result
Q2 Using this IP address 150.150.55.20 solve the following questions- Which Class this IP related to?- Suppose you use the following subnet mask 255.255.252.0 ,What is the number of hosts exist within a subnet?- What should you do to make each subnet have at least 200 hosts?
What is an IP address used for? a.) to identify another computer on the interenet b.) to identify the program running on a given computer that someone wants to access c.) to give a friendly name to a computer on the internet d.) to remember things in between HTTP requests
dont answer copying from another source or internet I will downvote for sure in that case Answer only you have accurate knowledge Otherwise will surely downvote Host A (with IP address 172.16.2.4) wants to communicate with Host B (with IP address 172.16.3.5). If the subnet mask for Host A is 255.255.0.0, will the hosts communicate using local transmissions or will they send information to the default gateway? Show the workings for the ANDing process below. Host A (with IP address 172.16.2.4) wants to communicate with Host B (with IP address 172.16.3.5). If the subnet mask for Host A is 255.255.0.0, will the hosts communicate using local transmissions or will they send information to the default gateway? Show the workings for the ANDing process below. Source IP Source Subnet Mask AND Result Destination IP Source Subnet Mask AND Result
22. Checksum, as used in the transport layer, can detect all errors.a. Trueb. False 23. Which of the following protocols cannot be used by a user agent to retrieve email messages fromits SMTP server?a. POP3b. SMTPc. IMAPd. HTTPe. All of the above
You suspect the DHCP server's settings are to blame for the issue you're debugging. Clients are assigned IP numbers and can ping local and remote hosts, but they are unable to load web sites. What may have caused the DHCP server's settings to be incorrect? a) Inaccurate ntp server b) Using the wrong DNS server c) Incorrect entry point Subnet mask error (d)
A network switch is used to create a LAN with 5 hosts (host1, host2, ...host5). How will the following scenarios be handled by the switch (i) Host1 sends two consecutive frames to host3 after which host3 sends two consecutive frames to host1 (ii) all five hosts transmit their frames at the same time to destination hosts 2,3,4,5,1 respectively. Explain
Attempt all Questions:- Part 1) Assign IP address configuration to the S2 server: part 1 question) Write IP-Address, Net mask and Default gateway. Part 2) To assign an IP address to the subnet A and to the subnet B you to have subdivide the network 169.1.96.0/19. Please choose a new netmask that subdivide the given network into atleast 3 (one for future use) subnetworks. You want to have a maximum amount of computer in each subnetwork. part 2 question) Write Net-mask (decimal dotted notation), your subnet A IP Address, Your subnet B IP Address, IP address R2 eth1 and IP Address R2 eth2. Part 3) Write down routing table of R1 (Routing table should include Destination, Next hoop and interface) Part 4) Write down routing table of R3 (Routing table should include Destination, Next hoop and interface) You are planning the network of a small company. The network has the address \( 169.1 .0 .0 / 16 . \) T some structure subnet
191.254.0.32 is a valid IP host address given the network ID of 191.254.0.0 while using 11 bits for subnetting? True/False I want correct answer. Last time someone did it wrong. I will report / downvote now.