The objective of the consolidation step is to achieve maximum particle packing and uniformity, so that minimum shrinkage and retained porosity will result during densification. Uniform particle size does not produce good packing. Adding particles of a size equivalent to the smallest voids reduces the pore volume to how much? O a. 23% O b. 52% О с. 40% O d. 12%

The objective of the consolidation step is to achieve maximum particle packing and uniformity, so that minimum shrinkage and retained porosity will result during densification. Uniform particle size does not produce good packing. Adding particles of a size equivalent to the smallest voids reduces the pore volume to how much? O a. 23% O b. 52% О с. 40% O d. 12%

Materials Science And Engineering Properties

1st Edition

ISBN:9781111988609

Author:Charles Gilmore

Publisher:Charles Gilmore

Chapter11: Fracture And Fatigue

Section: Chapter Questions

Problem 6ETSQ

See similar textbooks

Similar questions

A core sample of diorite, 11 cm long and 5.5 cm in diameter, was tested in unconfined compression. The diorite was known to have a modulus of elasticity of 7.3 x 10^3 MPa. a. At a pressure of 69 MPa, what would be the reduction in length of the sample? b. At this pressure what would be the vertical load on the sample? C. At 69 MPa stress the core showed an increase in diameter of 0.009 mm. What is the Poisson's Ratio for the sample?
7. A Brinell hardness measurement, using a 10 mm diameter indenter and a 500 kg load, produces an indentation of 2.5 mm on a steel plate. (a) Determine the Brinell hardness number (HB) of the steel plate; and (b) Approximate the tensile strength of the steel.
A core sample of quartzite, 13 cm long and 6.5 cm in diameter, was tested in unconfined compression. The quartzite was known to have a modulus of elasticity of 5.7 x 10^3 MPa. a. At a pressure of 69 MPa, what would be the reduction in length of the sample? b. At this pressure what would be the vertical load on the sample? C. At 69 MPa stress the core showed an increase in diameter of 0.013 mm. What is the Poisson's Ratio for the sample?
Brinell Test A 10-mm diameter Brinell hardness indenter produced an indentation 1.62 mm in diameter in a steel alloy when a load of 500 kg was used. Compute the HB of this material. What will be the diameter of an indentation to yield a hardness of 450 HB when a 500 kg load is used?
If Poisson's ratio of a material is 0.3, then the ratio of Young's Modulus to bulk modulus is (a) 0.6 (c) 1.2 (b) 0.8 (d) 1.4
Monolithic columns have larger surface areas than porous particles. Is true or flase?
In specific gravity test for coarse aggregate we found the following results: dry weight A= 3008 grams SSD weight B = 3037 grams %3D Submerged weight C=1907 grams The SSD specific gravity Select one: O a. 2.456 O b. 2.877 O c. 2.688 O d. 2.899
A 12.80 lb sample of quartzite was found to have the following amounts of material retained on each sieve/pan: 1/2 in. 0 lb, 3/8 in.= 1.20 lb, No. 4 = 4.87 lb, No. 8 = 3.58 lb, No. 16 = 2.09 lb, No. 30 0.90 lb, pan = 0.27 lb. a. Calculate the fineness modulus of the aggregate. b. Is this sieve analysis valid for acceptance purposes? Explain why. c. What is the ASTM size number of this aggregate?
When a round bar material with diameter of 37.5mm, length of 2.4 m, Young's modulus of 110 GN/m² and shear modulus of 42 GN/m² is stretched for 2.5 mm, its bulk modulus will be nearly
Answer by true or false for the following Using angular aggregate particles result in higher bulk density a- True b- False
Example 2: Specific gravity test was conducted for a fine aggregate. If the following data was obtained during the test: - the saturated surface dry weight of the sample = 500 g. %3D - Weight of pycnometer full of water= 750 g - Weight of pycnometer and sample and water= 1050 g. - Oven dry weight of the sample is 475 g. for this aggregate, FIND - The apparent specific gravity. - The bulk specific gravity on an ssd basis. Percentage of absorption.
In unconfined compression test, the deformation dial gauge is used for stress calculation Ture Fulse