The presence of thermal reservoir of a Geothermal Power Plant, supplements the generation of power and energy. What is then the thermal energy at the reservoir if the temperatures of the reservoir and a reference point are 315 C and 295 C respectively with volumetric specific heat and the value at the reservoir are 78 KJ/KG and 155 cu.meter. 241,800 KJ 352.500 KJ 421.850 KJ 541, 820 KJ

The presence of thermal reservoir of a Geothermal Power Plant, supplements the generation of power and energy. What is then the thermal energy at the reservoir if the temperatures of the reservoir and a reference point are 315 C and 295 C respectively with volumetric specific heat and the value at the reservoir are 78 KJ/KG and 155 cu.meter. 241,800 KJ 352.500 KJ 421.850 KJ 541, 820 KJ

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter1: Basic Modes Of Heat Transfer

Section: Chapter Questions

Problem 1.82P: Discuss the modes of heat transfer that determine the equilibrium temperature of the space shuttle...

See similar textbooks

Similar questions

Discuss the modes of heat transfer that determine the equilibrium temperature of the space shuttle Endeavour when it is in orbit. What happens when it reenters the earths atmosphere?
What are the important modes of heat transfer for a person sitting quietly in a room? What if the person is sitting near a roaring fireplace?
A heat engine absorbs heat from the combustion of gasoline at 2200°C. The gasoline has a specific gravity of 0.8 and a heat of combustion of 11,200 cal/gram. The engine rejects heat at 1200°C. The maximum work in calories that can be obtained from the combustion of 1 liter gasoline isA. 3.62 E6 calB. 4.53 E4 calC. 3.78 E5 calD. 4.22 E6 cal
The specific heat of 1.1 kg eggs at 13 ° C is 3.32 kJ / kg ° C. If the egg is thrown into boiling water at 102 ° C, what will be the maximum heat transfer to the egg? A) 295,5 kJ B) 325 kJ C) 89 kJ D) 97,9 kJ E) 1322 kJ
A heating system must maintain the interior of a building at TH = 20°C when the outside temperature is TC = 2°C. If the rate of heat transfer from the building through its walls and roof is 16.4 kW, determine the electrical power required, in kW, to heat the building using (a) electrical-resistance heating, (b) a heat pump whose coefficient of performance is 3.0, (c) a reversible heat pump operating between hot and cold reservoirs at 20°C and 2°C, respectively.
A certain coal fire power plant has a heat rate of 2.88 x 108 calories per kW-hr. Coal cost Php 2,500 per ton. How much is the fuel cost component of producing one kW-hr if the heating value of the fuel is 13,000 BTU per lb? a. 2.50 b. 1.75 c. 1.00 d. 1.25
1. Propose a thermal efficiency design for the nuclear power plant to avoid waste of energy and thermal pollution to the environment regarding to The First's Law thermodynamics and Second'law thermodynamics?
An office heater puts out 2090 Btu (British thermal units) of energy in the form of heat per hour. Given that 1 Btu=1.055 kJ,how many megajoules of energy in the form of heat can be produced per year (365 days) by the heater, assuming continuous operation?
A power station with an efficiency e generates W watts of electric power and dissipates D J of heat energy each second to the cooling water that flows through it. The cooling water increases its temperature by T degrees of Celsius. Find the mass of cooling water which flows through the plant each second. Specific heat capacity of water cw = 4,184 J/kgC e = 0.2W = 4.9 x 108 wattsD = 2.5 x 108 JT = 4 C Enter value in tons (1 ton = 1000 kg).Enter two digits after decimal point.
Steam enters a turbine with a pressure 4,229 kPa and h=3,263.08 kJ/kg, with a flow of 7.397 kg/s Steam leaves with h= 2,337 kJ/kg and pressure of 22 kPa. The radiative heat loss is equal to 20.86 kJ/kg of steam Determine the work steady flow in KW. Answer in 3 decimal places.
30lb of ice at 32°F is placed in 100lb of water at 100°F. The latent heat of ice may be taken as 144 BTU/lb, Cp of water=1BTU/lb°F, Cp of ice=0.5045 BTU/lb°F. a. 48°F b. 49°F c. 50°F d. 51°F
A thermodynamics steady flow system receives 4.56 kg/min of a fluid where the pressure is 137.9 Kpa specific volume of 0.0388 m3/kg, velocity of 122m/s and internal energy of 1160Kj/Kg. the fluid leaves the system at a boundary where pressure is 551.6Kpa , specific volume of 0.193 m3/kg , velocity of 183 m/s and internal energy of 52.8 Kj/kg. during the passage through the system, the fluid receives 3,000 Joules/s of heat. Determine the steady flow work in. Kj/min and kj/s