The rig shown consists of a 1450-lb horizontal member ABC and a vertical member DBE welded together at B. The rig is being used to raise a 3600-lb crate at a distance x = 12 ft from the vertical member DBE. The tension in the cable ADCF is 4 kips. 3.75 ft -17.5 ft- D 5 ft B A 6.5 ft 10 ft w E F 3600 lb

The rig shown consists of a 1450-lb horizontal member ABC and a vertical member DBE welded together at B. The rig is being used to raise a 3600-lb crate at a distance x = 12 ft from the vertical member DBE. The tension in the cable ADCF is 4 kips. 3.75 ft -17.5 ft- D 5 ft B A 6.5 ft 10 ft w E F 3600 lb

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter5: Three-dimensional Equilibrium

Section: Chapter Questions

Problem 5.1P: Bar AB of negligible weight is supported by a ball-and-socket joint at B and two cables attached at...

See similar textbooks

Similar questions

The homogeneous plate of weight W is supported by a ball-and-socket joint at D and three wires. Draw the FBD of the plate and count the unknowns.
Given the Frictionless Frame as shown below with pin connection atPoint A and Point C.Determine the following if the uniform load is ‘w’:a.) The Internal Reaction at Point A in terms of w.b.) The External Reaction at Point B in terms of w.c.) The Internal Reaction at Point C in terms of w.d.) The External Reaction at Point D in terms of w. NOTE: 3 DECIMAL PLACES
1A. The given system of knotted cords (label the left knot as J and the right knot as K) supports the indicated weights. a) What is the tension TA in cord A? b) What is the tension TB in cord B? c) What is the tension TC in cord C?
The structure shown below consists of an arch AB and an elastic column BC. (Note: Joints where members meet can be treated as pin). Calculate the weight, W, that causes the column to buckle. Determine the support reactions corresponding to the weight from the previous question. Given:a = 3.430 m
Compute for the forces P and Q if the force in member CD is equal to 6000 lb (C) and in member GD is equal to 1000 b (C). Show solution to answer P = 5170 & Q = 370
A boom hinged at the base of a vertical mast is used to lift a 2000 lb load. Find the tension in the cable and the reaction R at the end of the boom. The angle of the boom is 40 degrees with the horizontal and the cable is 60 degrees with the vertical mast. Pls include given, formula, fbd, and solution.
Question No 1. Analyze the truss shown below by using method of joints. Joint A has pin support while joint D has roller support Use R=256
The structure shown in Fig. (a) is supported by ball-and-socket joints at O and D, and by a slider bearing at C. The two members OABC and AD, connected by a ball-and-socket joint at A, each weigh 20 N/m. (1) Draw the FBD for the entire structure, and count the unknowns. (2) Draw the FBD for each of the members, and count the total number of unknowns.
Determine the forces in members a) AB, b) AG, c) GF, d) BF, e) BC. PLS USE JOINT METHOD GIVEN: W1= 13 kips W2= 12 kips b°= 39 degree a°= 7 degree L1= 3 ft L2= 8 ft L3= 7 ft PLS SHOW COMPLETE SOLUTION, WRITE LEGIBLY AND ONLY ROUND OFF THE FINAL ANSWER IN FOUR DECIMAL PLACES, ANSWERS SHOULD BE IN THE ATTACH TABLE. PLS SHOW THE FREE BODY DIAGRAM ON EACH JOINTS AND IN THE ANSWER IDENTIFY IF IT IS A TENSION OR COMPRESSION. PLS USE THE GIVEN VALUES A B AND C ARE ALREADY SOLVED PLS SOLVE ALL OR THE OTHER LETTER LETTER d.) and e.)
Determine the forces in members a) AB, b) AG, c) GF, d) BF, e) BC. PLS USE JOINT METHOD GIVEN: W1= 13 kips W2= 12 kips b°= 39 degree a°= 7 degree L1= 3 ft L2= 8 ft L3= 7 ft PLS SHOW COMPLETE SOLUTION, WRITE LEGIBLY AND ONLY ROUND OFF THE FINAL ANSWER IN FOUR DECIMAL PLACES, ANSWERS SHOULD BE IN THE ATTACH TABLE. PLS SHOW THE FREE BODY DIAGRAM ON EACH JOINTS AND IN THE ANSWER IDENTIFY IF IT IS A TENSION OR COMPRESSION. PLS USE THE GIVEN VALUES VALUES OF LETTER D AND LETTER E SHOULD BE IN THE ATTACHED TABLE PLS
A pin-connected crane framework is loaded and supported, as shown. The member weights are post, 700 lb; boom, 800 lb; and brace, 600 lb. These weights may be considered to be acting at the midpoint of the respective members. Calculate the pin reactions at pins A, C, D, E and at the roller B - Draw Free-body diagram. - Solve most simpliest way, only solving for what you are asked for.
This structure is supported by a roller joint on the left and a pin joint on the top. Two loads, P have similar magnitudes of P = 650 N and the angle θ = 40°. The length L of both members is 1.5 m. The vertical load acts at the midpoint of the horizontal member. Solve for the reaction forces at the roller and pinned joints.