The state of a plane strain at a point has the components &x500 (10-5), ɛy = 250 (10-6)and Yxy= 200 (10-6). Determine the principal strains and the maximum in plane shear strain.Select one:E1 = 535 (10 ), e2 = -215 (10-) and ymax in-plane = -320 (10 ).%3D= 535 (10-), E = 215 (10) and ymax in-plane = 160 (10).E = 535 (10), ɛ2 = -215 (10°) and ymax in-plane =320 (10).E = 535 (10-), 82 = 215 (10) and ymax in-plane = 320 (10).E1 = -535 (10) E2 = -215 (10) and ymax in-pare = -320 (10°).

Principal Strains, ε1=535 x 10-6, ε2=215 x 10-6 Maximum in-plane shear stress, γmax in-plane=320 x…

The state of a plane strain at a point has the components Ex 500 (10-6), ɛy = 250 (10-5) and Yxy 200 (10-6). Determine the principal strains and the maximum in plane shear strain. %3D Select one: E1 = 535 (10-), ɛ2 = -215 (10-) and ymax in-plane = -320 (10-°). E1 = 535 (10-), ɛ2 = 215 (10-°) and Ymax in-plane = 160 (10-°). E1 = 535 (10-), E2 = -215 (10-) and ymax in-plane = 320 (10-*). E = 535 (10-), 82 = 215 (10°) and ymax in-plane 320 (10-6). %3D !! -535 (10-6), e2 = -215 (10 ) and ymax in-plane = -320 (10-6). E1 =

The state of a plane strain at a point has the components Ex 500 (10-6), ɛy = 250 (10-5) and Yxy 200 (10-6). Determine the principal strains and the maximum in plane shear strain. %3D Select one: E1 = 535 (10-), ɛ2 = -215 (10-) and ymax in-plane = -320 (10-°). E1 = 535 (10-), ɛ2 = 215 (10-°) and Ymax in-plane = 160 (10-°). E1 = 535 (10-), E2 = -215 (10-) and ymax in-plane = 320 (10-*). E = 535 (10-), 82 = 215 (10°) and ymax in-plane 320 (10-6). %3D !! -535 (10-6), e2 = -215 (10 ) and ymax in-plane = -320 (10-6). E1 =

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter7: Analysis Of Stress And Strain

Section: Chapter Questions

Problem 7.7.11P: The strains for an element of material in plane strain (see figure) are as follows: x = 480 ×10-6. y...

See similar textbooks

Similar questions

A solid spherical ball of magnesium alloy (E = 6.5 × l0-6 psi, v = 0.35) is lowered into the ocean to a depth of 8000 ft. The diameter of the ball is 9.0 in. (a) Determine the decrease ?d in diameter, the decrease, ?V in volume, and the strain energy U of the ball. (b) At what depth will the volume change be equal to 0.0324% of the original volume?
An element of material in plain strain is subjected to shear strain xy = 0.0003. (a) Determine the strains for an element oriented at an angle = 30°. (b) Determine the principal strains of the clement. Confirm the solution using Mohr’s circle for plane strain.
An element of material in plain strain has the following strains: x = 0.001 and y = 0.0015. (a) Determine the strains for an element oriented at an angle = 250. (b) Find the principal strains of the element. Confirm the solution using Mohr’s circle for plane strain.
A strain rosette (see figure) mounted on the surface of an automobile frame gives the following readings: gage A,310 × 10-6:gage B,180 × l0-6; and gage C. -160 × 10-6. Determine the principal strains and maximum shear strains, and show them on sketches of properly oriented elements.
- 7.2-26 The strains on the surface of an experiment al device made of pure aluminum (E = 70 GPa. v = 0.33) and tested in a space shuttle were measured by means of strain gages. The gages were oriented as shown in the figure. and the measured strains were = 1100 X 106, h = 1496 X 10.6, and = 39.44 X l0_. What is the stress o in the x direction?
On the surface of a structural component in a space vehicle, the strains arc monitored by means of three strain gages arranged as shown in the figure. During a certain maneuver, the following strains were recorded: e, = 1100 X l0_6, 6h = 200 X lO_6, and e = 200 X 10-6. Determine the principal strains and principal stresses in the material. which is a magnesium alloy for which E = 6000 ksi and v = 0.35. Show the princ ipal strains and principal stresses on sketches of properly oriented elements.
During a test of an airplane wing, the strain gage readings from a 45° rosette (see figure) are as follows: gage A, 520 × l0-6; gage B. 360 × l0-6; and gage C,-80 × 10-6. Determine the principal strains and maximum shear strains, and show them on sketches of properly oriented elements.
The strains for an element of material in plane strain (see figure) are as follows: x = 480 ×10-6. y = 140 × l0-6, and xy = —350 x 10”. Determine the principals strains and maximum shear strains, and show these strains on sketches of properly oriented elements.
An clement of material in plane strain (see figure) is subjected to strains ex= 480 × 10-6, Ey= 70 × l0-6, and yxy= 420 × l0-6. Determine the following quantities: (a) the strains for an element oriented at an angle 0 = 75°, (b) the principal strains, and (c) the maximum shear strains. Show the results on sketches of properly oriented elements.
A spherical balloon with an outer diameter of 500 mm and thickness 0.3 mm is filled with a gas. Calculate maximum permissible pressure in the balloon if the allowable normal strain at the outer surface of the balloon is O.h Assume E = 4 MPa and v = 0,45.
Solve the preceding problem if the cross- sectional dimensions are b = 1.5 in. and h = 5.0 in., the gage angle is ß = 750, the measured strains are = 209 × 10-6 and B = -110 × 10, and the material is a magnesium alloy with modulus E = 6.0 X 106 psi and Poisson’s ratio v = 0.35.
A thin square plate in biaxial stress is subjected to stresses ?? and ??., as shown in part a of the figure. The width of the plate is h = 12.0 in. Measurements show that the normal strains in the x and v directions are s = 427 × 10-6 and s = 113 × l0-6, respectively. With reference to part b of the figure. which shows a Iwo-dimensional view of the plate. determine the following quantities. (a) The increase .d in the length of diagonal Oil. (b) The change . in the angle between diagonal Oti and the x axis, (c) The shear strain y associated with diagonals Oil and cf(that is. find the decrease in angle ced).