The time period of rolling of a ship of weight 30,000 kN in sea water is 12 seconds. The centre of buoyancy of the ship is 1.6 m below the centre of gravity. What will be the radius of gyration of the ship (in m) if the moment of inertia of the ship at the water line is 11250 m4? Take specific weight of sea water as 10,000 N/m3.

The time period of rolling of a ship of weight 30,000 kN in sea water is 12 seconds. The centre of buoyancy of the ship is 1.6 m below the centre of gravity. What will be the radius of gyration of the ship (in m) if the moment of inertia of the ship at the water line is 11250 m4? Take specific weight of sea water as 10,000 N/m3.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A disk having an outer diameter of 120 mm fits loosely over a fixed shaft having a diameter of 30 mm. If the coefficient of static friction between the disk and the shaft is μs = 0.15 and the disk has a mass of 50 kg, determine thesmallest vertical force F acting on the rim which must be applied to the disk to cause it to slip over the shaft.
A body having a mass of 46 Kg rests on a horizontal plane for which the coefficient of friction f=0.4. A force P acts on the body at an angle of 20⁰ with the horizontal. Find its magnitude for impending motion.
3. If the center of gravity of a ship in the upright is 10m above the center of gravity of the portion underwater, the displacement (buoyant force 0 is 1,000,000 kg and the ship is tipped 30 degrees causing the center of buoyancy to shift sidewise by 8m. Find the location of metacenter from the bottom of the ship if its draft is 3.0m. Find the metacentric height. What is the value of the moment?
A ball is thrown vertically upward with a speed of 15 m/s. Determine the velocity in m/s when it returns to its original position.
an open cylindrical tank 45 cm in diameter and 135 cm tall is full of water and revolved about its own vertical axis at constant angular speed. what will be the depth of water (in meters) in the tank when it is brought to rest from an angular speed of 200 rpm.
The ladder and the person weigh 30 lb and 180 lb, respectively. The center of mass of the 1-2ft ladder is at its midpoint.The coefficient of static friction between the ladder and the floor is 0.5 and the coefficient of friction between the ladder and the wall is 0.3. What is the largest value of angle ALPHA for which the person could climb to the top of the ladder without it slipping?
An 80-kg block rests on a horizontal plane. Find the magnitude of the force P required to give the block an acceleration of 2.5m/s² to the right. The coefficient of kinetic friction between the block and the plane is μk = 0.25.
A tanker contained with water is pushed horizontally at constant acceleration of 5.0 m/s?. If the tank is 10 m long and the depth of the water is 3 m when at rest. How far below the water surface should the top side of a vertical square 1 m on each side should be immersed so that the center of pressure will be 70 mm below the center of gravity?
the 6 kg sphere is projected horizontally with a velocity of 17 m/s against the 30 kg carriage which is backed up by the spring with stiffness of 1210 N/m. The carriage is intially at rest with the spring uncompressed. If the coefficient of restitution is 0.51, calculate the rebound velocity v', the rebound angle , and the maxiumum travel of the carriage after impact.
mechanics of deformable bodies 1. A cylindrical pressure vessel with a hemispherical cap is most likely to have joint failure in which joint? 2. Maximum shear in a solid circular shaft will be attained when the radial distance is equivalent to its _________.
q3(c) A jet of water (at 10°C) of diameter 2.5 cm flows freely in the atmosphere in a horizontal plane with the initial velocity of 6.5 m/s is deflected by a curved vane 90°. (i) Illustrate the force diagram. (ii) Calculate the forces exerted on the water by the vane in x- and y- direction.
A 4 kg ball moving to the right at 6 m/s and a 3 kg ball moving to the left at 8 m/s on a horizontal smooth plane along a straight line. Determine the speed of the 3 kg ball after impact if the impact is elastic.