Traffic volume is 2578 veh/hr with 687 vehicles arriving in peak 15 minutes.There are tow lanes, 12 percent trucks(30/70 split for SUT/TT), the length of the road is 1.8 miles long with a 3.5 percent grade. calculate the analysis flow rate?
Q: What emerging technologies are shaping the future of transportation engineering?
A: Emerging technologies are transforming transportation engineering, offering innovative answers to…
Q: What is the role of soil mechanics in groundwater management?
A: Soil mechanics helps in understanding essential soil properties crucial for groundwater management.…
Q: Please only answer if sure it is correct. will thumbs up if correct!
A: the solution is provided in the image thank you.Explanation:
Q: Discuss the factors affecting the creep resistance of materials?
A: Creep resistance is an important material property, particularly where materials are subjected to…
Q: In the soil profile shown below, the water table is currently located at the ground surface (WT.1)…
A: OCR is over consolidation ratio is defined as ratio of maximum effective stress in past and…
Q: How much is stress at point .... in the following culvert considering applied moment of 100…
A: Given data, M = 100 kips-inch Stress at point in culvert =?
Q: What factors affect the tensile strength of a material?
A: Tensile strength is an intrinsic mechanical property that measures how much pull a material can…
Q: Consider the following y-x graph of a wave's position. At time t = 0, x0 = 2.0 m, yo = 1.4 m, and…
A: (1) At , (2) The period of motion
Q: I need a literature review about (the Enhancing indoor air quality and safe entertainment in sports…
A: Here we have to write aboutThe Enhancing indoor air quality and safe entertainment in sports halls
Q: Determine the central axis of the system with sliding vectors defined as follow: A = 2i + j + 3k;…
A: The central axis of the system is 11i+j+2k which do not satisfy the given direction copine…
Q: Define ultimate strength and discuss its significance in material design.
A: Ultimate strength is the other name for tensile or ultimate tensile strength (UTS), which is an…
Q: A circular plate with radius 8 m is submerged vertically in water as shown. Express the hydrostatic…
A:
Q: Explain the importance of material properties in the design of civil engineering structures?
A: Material qualities are indispensable in building civil engineering structures. These features…
Q: suppose Joel was able to travel 6.6 km west in 1.2 hours ion his car. What is his average velocity…
A: The objective of the question is to calculate Joel's average velocity in meters per minute given…
Q: 6-1 Draw the shear and moment diagrams for the shaft. The bearings at A and B exert only vertical…
A:
Q: In gradually varied flow, the channel bottom, water surface, and EGL are parallel. Select one: O…
A: Given Channel bottomWater surfaceEGLTo find out TRue or false
Q: The daily streamflow data at a site having a drainage area of 650 km² are given below. Compute (show…
A: Drainage Area = 650 km 2 Time ( days)Flow (m 3 / s…
Q: A pump draws water from a sump through a vertical 6" pipe. The pump has a horizontal discharge pipe…
A: D1 = 6 in or 0.5 ft D2 = 4 in or 0.333 ftQ = 1.25 cfs
Q: Using the illustration below: if H = 84" and L 96" what is the lifting capacity of each wire rope if…
A: Vertical choker weight = 8000 lb Determine the lifting capacity of each wire.
Q: For the area below, evaluate 1. The (x,y) coordinates of the centroid (please mark your origin or…
A:
Q: Estimate the height which water will rise in a capillary tube 12mm diameter. Use surface tension =…
A: The objective of the question is to calculate the height to which water will rise in a capillary…
Q: An SVC connects a -4% grade to a +4% grade. The curve goes under a pedestrian bridge at PVI. The…
A: Given:Vertical clearanceSight distanceHeight of drivers eyeHeight of objectTo find: Length of curve.
Q: An existing levee has a top width of 10 feet, a top ele- vation of 10 feet above the base, and 3:1…
A: The objective of the question is to calculate the additional land space required for the base of the…
Q: Explain the concept of drought and its impacts on hydrology.
A: Drought is a naturally occurring phenomenon where unusually low precipitation is experienced for a…
Q: The davit shown in the figure is supported by a cable at B and pinned at A and is subjected to a…
A:
Q: Solve for the EIO and EIy at the free end of the cantilever beam.
A:
Q: 25 35 55 60 15 30 140
A: Front viewSide view and top view
Q: A rural arterial is to be constructed in an area of rolling terrain, determine the following design…
A: For determination of design values for a rural arterial to be constructed in an area of rolling…
Q: 3(a) A section of a highway highway has a speed-flow relationship of the form: q = av² + bv. It is…
A: i) speed when flow is 1400 veh/hr is V= 78.98 Km/hr ( uncongested condition) V= 17.01…
Q: In the soil profile shown below, the water table is currently located at the ground surface (WT.1)…
A: In this question we use use over consolidation ratio, i.e., the ratio of maximum effective stree in…
Q: Estimate the height which water will rise in a capillary tube 12mm diameter. Use surface tension =…
A: The objective of the question is to calculate the height to which water will rise in a capillary…
Q: 5-1. Suppose that a proposal is made to hand-sort all of the refuse from a town of 100,000 people.…
A: Hand-sorting trash for a town of 100,000 is unrealistic. It's expensive, unsafe, slow, and misses…
Q: Assume that the overall pavement evaluation of Interstate highways in a district consists of four…
A: Overall pavement index = 83.1.Explanation:
Q: A W 6 x 9 is used as a purlin for a roof truss. The top chord of the truss is inclined at 26.6° from…
A:
Q: An urban catchment of area 3 km². If the time of concentration is 50 minutes, estimate the peak flow…
A: Catchment Area (A) = 3 km2 = 3 × 106 m2 Time of concentration (tc) = 50 minutesDepth of rainfall (d)…
Q: Find Total streamflow volume over the measurement period
A: Drainage area=650 km2Time and flow are given in table FINDTotal stream flow volume over the…
Q: 2.20. Refer to the framework shown in Fig. 2-38. Now, instead of the two loads P, the temperature of…
A: Change in distance between A and B is L√2 * coefficient of thermal expansion*change in temperature…
Q: Q1: Determine the range of P for which the system of two blocks will be in equilibrium. Friction is…
A:
Q: Discuss the factors influencing the economic feasibility of pressurized flow projects?
A: Pressurised flow projects use pressurised tubes to effectively transport water to different…
Q: Q3) Using the slope-deflection method, draw the B.M.D for the beam ABCDE shown in Fig 100 KN 48 kN/m…
A:
Q: Two cylindrical specimens A and B of the same soil, of 50 mm and 75 mm diameter respectively, are…
A: Diameter of specimen-A (dA) = 50mm Diameter of specimen-B (dB) = 75mmWeight of water collected is…
Q: Consider the T-beam shown in (Figure 1). Take wy 18 kN/m and toy-27 kN/m Figure 200 mm C 200 mm 20…
A:
Q: A 1m x 2m inclined plate is submerged as shown. The normal force acting on the upper surface of the…
A: Inclined submerged plateWidth=2m.Depth=1m.
Q: 4 kN/m A C 2 m 8 kN 5 m D 8 kN 2 m B
A:
Q: Question: Given: a = 0.4 m b=0.1 m A B F₁ = 800 Kn 0.7 m F₂ = 912 kN 1 m M₁ = 400 kNm 1) Find the…
A:
Q: NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to…
A:
Q: A well in an infinite confined aquifer (transmissivity = 30 m²/h and aquifer storativity = 0.005)…
A: The draw down in the observation well using the Cooper-Jacob, to first determine the value of U,…
Q: What are the different types of errors encountered in surveying measurements?
A: In surveying measurements, numerous types of errors can distort how the data is accurate and…
Q: 不 1 m 1.5 m 3 m E Air, p = 32 kPa Oil, s = 0.80 Water Glycerin, s = 1.26 LL F cg 60° D
A:
Q: Service Engineering
A: a) The cost of pumping water continuously for one fortnight, with a mandatory cool down of four…
Step by step
Solved in 1 steps
- Q3b. The 15km Atta Mills road connecting Old Barrier to Kokrobite operates with a capacity of 2250 pcu/hr and can be traversed within 15 minutes under free flow conditions. If a flow of 3100 pcu/hr is assigned to the road based on the capacity-restrained approach, what would be the resultant travel time after the traffic assignment proce ss.There are 3 vehicles observed in a 100 m section of McArthur highway. If the average time headway is 4 sec., compute the space mean speed of the vehicles in kph. thank youAn existing six-lane divided multilane highway with a field-measure free-flow speed of 45mph serves a peak-hour volume of 4,000 vehicles per hour, with 10% trucks (50% SUT, 50% TT). The PHF is 0.88. The highway has generally rolling terrain. What is the likely level of service for this segment? Good weather, no incidents, no work zones, and regular drivers may be assumed.
- If 420’ are available as Sight distance on an urban highway having a 2.5% grade. Assuming all the parameters according to ASHTO, find maximum speed which can be posted on the highway for safe travelling.B- A traffic count was conducted to a rural highway if the peak 15 mints 800 vehicles and peak hourly factor (PHF) 0.95 the directional distribution (35:65)% and traffic composition is 75%p.c and 25%truck, 1-Estimate the number of lanes required ? (capacity = 2000 PC/hr/1 lane) 2- Estimate Level of service if the free flow speed 110 km/hr.A traffic count was conducted to a rural road, if the peak hour traffic volume is 4000 vehicle/day. If the directional distribution (40:60%) and traffic composition is 70%Pc, 20% bus and 10% trucks. Estimate the number of lanes. Assume Lane capacity is 2000 Pc/hr/lane and PHF= 0.55
- (TRAFFIC AND HIGHWAY ENGINEERING) An undivided multilane highway segment has two 11-ft lanes in the eastbound direction with no shoulders and a 55 mi/h speed limit. This highway segment has 40 access points on a 1.25-mile, 2.5% upgrade. During the highest 15 minutes of traffic flow within the peak hour, there are 755 vehicles and 12% of these are heavy vehicles with a 70%/30% mix of single-unit and tractor-trailer trucks. What are the estimated speed, density, and LOS of upgrade?A portion of the extension of SLEX has a free flow speed of 60kph and a capacity of 3600 veh/hr. If in a given hour, 3344 vehicles were countered at a specified point along this highway, determine the traffic density of these 3344 vehicles.A 6-lane urban freeway is suggested to be designed with the following data: F.ADT = 45000 vpd, design hour factor= 0.12 and directional split = 65%. Rolling terrain, 10% trucks, 5% buses, 6% Rvs, PHF is 0.91 and all traffic are commuters. Then based on the HCM 2000 procedure, the equivalent passenger- car hourly flow rate is about
- A six-lane freeway (three lanes in each direction) in mountainous terrain has 10-ft lanes and obstructions 1 ft from the right edge. There are five ramps within three miles upstream of the segment midpoint and four ramps within three miles downstream of the segment midpoint. The traffic stream consists of mostly commuters with a peak hour factor of 0.84, peak-hour volume of 2500 vehicles, and 4% recreational vehicles. What is the level of service? (Write the letter only)A traffic volume of 900 vehicles/hour is observed at an approach intersection. Determine the peak flow rate in one hour for the peak hour factor following: 1.00, 0.90, 0.80, 0.70. Create plots and comment on the results.The rate flow at a point in the highway is 1200 vehicles/hour. Find the space mean speed in mph if the density of traffic is 25 vehicles per mile