у -ахis F4 Fs F1 х- ахis F3 F2 .ne arm in is subjected to tive torces as tollows: F1 = 135 N, F2 = 98 N, F3 =210 N, Fa= 56 N. If the y - direction resultant force is 144 N, and ox = 40°, 0 = 50°, B = 70°: 3- What is the magnitude of the force Fs? c) 151.6 N a) 318.4 N b) 99.IN d) 36.5 N e) 111.2 N f) 18.8 N g) None of them 4 - What is the magnitude of the resultant of these five forces? a) 269.4 N b) 157.IN c) 354.5 N d) 280.6 N e) 155.4 N f) 329.1 N g) None of them 5 - What is the direction of resultant measured counterclockwise from the positive x-axis? a) 13.6° b) 285.5° c) 30.8° d) 110.1° e) 72.3° f) 190.9° g) None of ther

у -ахis F4 Fs F1 х- ахis F3 F2 .ne arm in is subjected to tive torces as tollows: F1 = 135 N, F2 = 98 N, F3 =210 N, Fa= 56 N. If the y - direction resultant force is 144 N, and ox = 40°, 0 = 50°, B = 70°: 3- What is the magnitude of the force Fs? c) 151.6 N a) 318.4 N b) 99.IN d) 36.5 N e) 111.2 N f) 18.8 N g) None of them 4 - What is the magnitude of the resultant of these five forces? a) 269.4 N b) 157.IN c) 354.5 N d) 280.6 N e) 155.4 N f) 329.1 N g) None of them 5 - What is the direction of resultant measured counterclockwise from the positive x-axis? a) 13.6° b) 285.5° c) 30.8° d) 110.1° e) 72.3° f) 190.9° g) None of ther

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The frame is used to support a live load of 1.575 kPa. Thickness of concrete slab is 124.903mm. Weight of concrete is 23.293 kN/m^3. Weight of beam BG,AH,CF,DE is 4.526 kN/m and that of is 5.413 kN/m L=5.918m Width"B" = 1.582m Compute the reaction at point A (kN) at member AD Answer: 71.118 Need solution
For the given loads w = 36 KN/m and M=90 KN.m is supported as shown by a roller at D and a hinge at D 1- Magnitude of reaction at D is (KN) : (a. 72 - b. 180 - c. 144 - d. 216 - e. 252 ) 2- Magnitude of reaction at A is (KN): (a. 72 - b. 108 - c. 252 - d. 36 - e. 180 ) 3- Bending moment just to the right of B (KN.m) : (a. -36 - b. -54 - c. -72 - d. -90 - e. -108) 4-Find Shear force just to the right of D 5- Find Shear force just to the left of D 6- Find Maximum absolute value of bending moment (KN.m) is
For the given loads F1=42 KN, F2=48 KN, F3=45 KN, F4=32 KN (Assume internal forces are in tension) 1- Magnitude of reaction at K is (KN) :(a. 151 - b. 226.5 - c. 302 - d. 377.5 - e. 453 ) 2- internal force in member JH (KN) :(a. -327 - b. -218 - c. -436 - d. -545 - e. -654) 3- internal force in member IH (KN) : (a. -204.600222 - b. -136.400148 - c. -272.800296 - d. -341.00037 - e. -409.200444 ) 4- Magnitude of reaction at A is (KN) 5- internal force in member IK (KN) is 6- internal force in member GF (KN)
A reinforced concrete beam has a width of 425mm and an effectivedepth of 900mm. The longitudinal bars at compression side are 4-25mm dia. and 2layers of 4-32mm dia. at tension side. Concrete strength f’c=27.60 MPa and fy=420.4) Calculate the Transformed moment of Inertia.5) Calculate the moment capacity of the section.6) Calculate for the safest uniform load that can carry by the beam if ihas a lengthof 10m.
A steel column carries an axial load of 819 kN and a moment of 63 kN-m at the top and moment at the bottom which is only70% of the moment at the top. The two moments are in opposite direction and applied about the x-axis and the steel section has the following properties: A = 13172 mm2 rx is 109 mm ry = 94 mm Sx = 1200 x 103 mm3 K = 1.0 L= 3.6 m E = 200,000 Mpa Fy = 248 Mpa Use NSCP specification for compressive stress and Fb =148 Mpa. Determine the Compressive Stress if Axial load only existed.
13 - Support reactions will be found in the gerber beam whose loading condition is given in the figure. A is the fixed support, the G point is the intermediate joint, and the B support is the sliding joint. Distributed loads on the beam q1= 9 kN ⁄ m, q2= 6 kN ⁄ m, beam dimensions a = 3 m, b = 2 m. Accordingly, Bx = ?a) 45B) 6C) None.D) 0E) 19.5
A 6-m simply supported reinforced concrete rectangular beam is 250 mm wide. The total depth is 400 mm and its effective depth is 340 mm. It is reinforced for tension only with 4-28mm diameter bars. It carries a total dead load of 21.6 kN/m including its weight. Fy = 350 MPa and f’c = 20.7 MPa. 1. Compute the distance of the neutral axis from the top most fiber. a. 195.98 mm b. 230.56 mm c. 186.01 mm d. 218.84 mm 2. Which of the following gives the ultimate moment capacity of the beam? a. 202.09 kN.m b. 181.88 kN.m c. 171.4 kN.m d. 186.2 kN.m 3. Which of the following most nearly gives the unfactored uniform live load capacity using the load combination 1.2D+1.6L? a. 40.42 kN/m b. 15.38 kN/m c. 9.06 kN/m d. 3.84 kN/m
A W460×60 steel beam is loaded as shown. Assume w = 90 kN/m, M0 = 135 kN·m, LAB = 3.9 m, LBC = 1.6 m, E = 200 GPa, and I = 255 x 106 mm4. Determine the reaction force at roller B.
A short spiral column carries an axial dead load of 118 kN and an axial live load of 235 kN. Use fc’ = 27.5 MPa, fy = 414 MPa. Use U = 1.2D + 1.6L, Ф = 0.65 1. Assuming ρ = 0.01, which of the following gives the diameter of the column section? * a. 200 mm b. 215 mm c. 220 mm d. 300 mm 2. Which of the following gives the number of 16 mm diameter main bars? a 3 pcs b. 4 pcs c. 5 pcs d. 6 pcs 3. Which of the following gives the spacing of spirals? a. 10 mm Ф b. 55 mm Ф c. 60 mm Ф d. 65 mm Ф
A cantilever beam, 3.5 m long, carries a concentratedload, P, at mid-lengthGiven:P = 200 kNE = 200 GPaI = 60.8 x 10^6 mm^4 How much is the deflection (mm)at mid-length What force (kN) should be applied at the free end to preventdeflection? To limit the deflection at mid-length to 9.5 mm, how much force(kN) should be applied at the free end?
Determine support reaction. P=800 lb , a=5 ft b=9 ft
A) Define the bending stress as relates of beams. B)A fixed AB length 3m carries a point load of 45KN at a distance of 2m from A.if the flexural rigity (i.e. EL)is 1×10^4KNm^2, determine: I) fixed end moment A and B II) Deflection under the load III) the maximum deflection IV) The position of the maximum deflection.