What is the cantilevered beam?

Q: Cantilever prismatic beam is loaded by concentrated loads.

A:

Q: Write the methods for finding beam deflections?

A: Beam undergoes two deviations while it is bending i.e. linear and angular. The linear deviation of…

Q: What are the four loadings that include the loadings on cantilevered beams?

A: The four types of loadings to which the all the beams are subjected to are: Shear load: Shear load…

Q: Why is the stability for beams important?

A: Beams are the lateral members of structures/machines. They resist loads applied laterally.

Q: An example for statically determinate beam is beam.

A:

Q: Activity 1: What will be the possible scenarios that might be happened to the beam shown due to the…

A: The forces acting are the weight of the block acting downwards and the weight of the beam acting…

Q: Why should the Beams be braced properly along their sides?

A: The bracing is mainly classified into three types  1) Plane bracing 2) Torsional bracing, 3) U frame…

Q: What are the cause of the slopes and displacements of the beams?

A: When a structure is in the action of applied loads, each member shows deformation because of which…

Q: What can be done if the elastic curve for a beam seems difficult to establish?

A: When the elastic curve for a beam seems difficult to establish then the conjugate beam method is…

Q: What is a simply supported beam?

A: A simply supported beam is one of the simplest structures in Structural Mechanics. The one end of a…

Q: Where is the inflection point situated in the beam?

A: Inflection point is a point on bending moment diagram where bending moment curve changes its sign…

Q: Direct formula for single beam element??

A:

Q: Cite the difference of an I-BEAM and a CANTILEVER

A:

Q: What are the statically indeterminate beams and shafts?

A: There are always three or four equilibrium equations to solve for the reactions provided by the…

Q: How can the flexural rigidity be constant along the length of the beam?

A: Flexural rigidity is defined as the product of Young’s modulus (E) and Moment of inertia of the beam…

Q: What kind of Beams are called non-prismatic beams?

A:

Q: What would be the reactions if the beam is statically indeterminate?

A: If the number of actual reactions in a member is greater than the number of useful static…

Q: Is a simple cantilever beam externally determinate structure?

A: Externally determinate are those structures whose no. Of unknowns are equal to no. Of equations.

Q: What causes the localized buckling of the beam's flanges?

A: To find: The causes of localized buckling of the beam's flange Buckling:  It is defined as the…

Q: Describe the  procedure that  provides a method for determining theslope and deflection of a beam?

A: To provide: A method for determining the slope and deflection of a beam Slope: The angle made by a…

Q: When should the beam be re-designed on the basis of shear tallow?

A: The beam is defined as a rigid member which can only be bear loading perpendicular to the…

Q: What are the uses of beams?

A: Any structural element which takes on transverse loading and not longitudinal is called a Beam. Any…

Q: What do the external loadings on a beam create?

A: To define: what does the external loading create on a beam Beam: beam is defined as any structural…

Q: What method should be developed in curved beams to describe the stress distribution?

A: The distribution of stress in curved beams can be determined using the following assumptions: 1. The…

Q: When does the beam turn concave upwards?

A: Solution: Beam is a structural element which takes transverse load under which beam tends to concave…

Q: What do the beams represent?

A: Beams are defined as the structural member which has the loading perpendicular to the major axis of…

Q: Why should the deflection of a beam or shaft often be limited?

A: Reasons for the deflection of a beam or shaft often be limited : 1. If deflection in beams are not…

Q: How is the internal strain energy within a beam caused?

A: Strain energy: When a system undergoes a stress and rearranges itself due to deformation, the energy…

Q: When does the deflection of the beam become maximum?

A: The bending moment equation of the beam is given by the formula, M=EId2ydx2 Where,  y=deflection of…

Q: Describe the procedure which provides a method for determining theslope and deflection of a beam?

A: We will discuss the procedure of using the Double integration method for the calculation of slope…

Q: Which of the following is statically indeterminate beam? O simple beam O overhanging O propped beam…

A: Propped beam is the type of beam in which one end is fixed and the other end is support by the…

Q: What are Composite beams?

A: Composite beams are beams that are made of two or more dissimilar materials joined together to act…

Q: Why does the nail spacing depend on the magnitude of shear in the beam?

A: Sometimes a few wooden boards are joined together with the help of nails to form as a beam in a…

Q: Define the term beam is cantilevered from fixed support?

A: Fixed beam:           A beam supported on both ends, which are fixed in place. Depending on the…

Q: Types of Supports and Beams

A: following is the answer to the above question-

Q: What happens if a given beam could fail according to Von Mises criteria but according to Tresca…

A: According to Von Mises Theory or Maximum shear strain energy theory: The failure take place when the…

Q: Describe a method for determining the shape of a beam that is fully stressed along its length?

A: let consider a beam that is fully stressed along its length ; we already has given that  σ=M×YI ; so…

Q: How are the beams designed?

A: Beams are widely used in Construction work, so there design should be safe. Beams are designed…

Q: How can the elastic curve for a beam be established?

A: Elastic curve   The curve along which the axis of a beam is bent under the action of a load (the…

Q: Why should the beams be designed on the basis of strength?

A: Beam is a structural member that supports the loadings perpendicular to their longitudinal axis.

Q: How can the method of integration be applied to statically indeterminate beams and shafts?

A: A beam or shaft is termed as indeterminate when the equations of equilibrium are less than the…

Q: Why is it important to determine the displacements in the beams?

A: In beam deflection it is determined that, how the shape or the size of the beam changed from the…

Q: Why do the engineers sometimes choose a beam having a variable cross-sectional area?

A: The most efficient and economical section used as a beam is I section which is having a…

Q: What is the purpose of using the beams?

A: Beams are used for multipurpose, the main purpose of beams are used to carry the load or transmit…

Q: simply supported beam

A: EI=29000*340=9860000kip/in2=68472.22kip/ft2 ∑MB=012*12*8*83-4*11*13.5+Ey*23=0Ey=20.26 kip…

Q: Types of Supports and Beams ‏with explanations

A: To explain: Types of Supports and Beams ‏with explanations Explanation: The type of supports: There…

Q: Are Most of the beams made of ductile materials?

A: In general, the ductile materials have good tensile, bending strength, while brittle materials have…