What is the value of the long termdeflection for the double reinforcedbeam having a base of 250 mm, d of400 mm, As = 3000 mm^2, As' = 1000mm^2. If the computed value ofdeflection deadload = 5.50 mm,%3Ddeflection live load = 10.00 mm,deflection sustained live load = 7.00mm. The long term deflection to beconsidered is 8 years.24.286 mm30.000 mm26.667 mmNone of the Choices21.111 mm22.500 mm

Answered: Image /qna-images/answer/2d5a99f8-d593-4929-a0a4-4caa20b7b3d3.jpg

What is the value of the long term deflection for the double reinforced beam having a base of 250 mm, d of 400 mm, As = 3000 mm^2, As' = 1000 mm^2. If the computed value of deflection deadload = 5.50 mm, deflection live load = 10.00 mm, deflection sustained live load = 7.00 mm. The long term deflection to be considered is 8 years. O 24.286 mm 30.000 mm 26.667 mm None of the Choices

What is the value of the long term deflection for the double reinforced beam having a base of 250 mm, d of 400 mm, As = 3000 mm^2, As' = 1000 mm^2. If the computed value of deflection deadload = 5.50 mm, deflection live load = 10.00 mm, deflection sustained live load = 7.00 mm. The long term deflection to be considered is 8 years. O 24.286 mm 30.000 mm 26.667 mm None of the Choices

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A hollow box beam has an outside dimension of 400 mm x00mm and inside dimension of 300 mm x 500 mm (uniformthickness of 50 mm) has a fixed ended span of 6 m.1. Compute the plastic section modulus.2. Compute the plastic moment capacity of the beam.3. Which of the following gives the safe uniform loaddistributed horizontally that the beam could carry beforecollapse if Fy = 250 (Plastic Analysis using Virtual Work Method) show complete and detailed solution pls.
A simply supported beam 4 m long is carrying a variable load of w = 0 KN/m at the left support and w = 15 KN/m at the right. The beam has a width of 200 mm and a depth of 250 mm and is made up of 80% grade Narra. Use dressed dimension by reducing its dimensions by 10 mm. What is the actual shearing stress of the beam in MPa?
The steel framework shown below is used to support the reinforced concrete slab (unit weight of concrete =23.6KN/m3) that is used for an office use (minimum live load = 2.4KPa). The slab is 150 mm thick. Use a=3m, b=5m. Neglect the self-weight of the beam and girder. Assume all beams and girders have simple supports. NSCP 2015 Load factors: 1.2DL & 1.6LL. Calculate the total ultimate/factored SLAB load in Kilo Pascals? Express your answer in 2 decimal places.
A hollow box beam has an outside dimension of 400 mm x 600mm and inside dimension of 300 mm x 500 mm (uniformthickness of 50 mm) has a fixed ended span of 6 m.1. Compute the plastic section modulus.2. Compute the plastic moment capacity of the beam.3. Which of the following gives the safe uniform loaddistributed horizontally that the beam could carry beforecollapse if Fy = 250 (Plastic Analysis using Virtual Work Method) show complete and detailed solution pls.
A simply supported 1 way slab having span of 3 meters is to carry the load for DL = 5kpa and LL = 4.8Kpa. If the concrete f'c = 28Mpa and rebar to be used is 10mm with fy = 276Mpa. a.) Determine the minimum thickness of the 1 way slab.(answer in millimeter in whole number) b.) Determine the Ultimate loading combination for the slab considering 1 meter strip?(answer in KN/m. in 3 decimal places ) c.) Determine the Ultimate moment for the slab considering 1 meter strip?(answer in KN-m. in 3 decimal places) d.) Determine the effective depth of the slab considering concrete cover = 20mmanswer in millimeter. in whole number e.) Determine the area of reinforcement for the slab based on the actual loadings.(answer in sq.mm. in 3 decimal places) f.) Determine the spacing of the rebar.(answer in millimeter(Don't round up, use actual value). in 3 decimal places)
A reinforced concrete beam having a width of 500 mm and an effective depth of 750 mm is reinforced with 5 – 25mm φ. The beam has simple span of 10 m. It carries an ultimate uniform load of 50 KN/m. Use f’c = 28 MPa, and fy = 413 MPa. What is compressive force C resisted by concrete in the beam in KN? Express your answer in two decimal places.
5) A square footing 2.2 m x 0.31 m thick supports a 300 mm square column at its center. Column loads are service conditions: DL = 331 kN LL = 251 kN f’c = 21 MPa fy = 415 MPa Concrete cover to the centroid of steel reinforcement = 100 mm Calculate the maximum ultimate bending moment in the slab. Write your final answer as whole number with the unit of kN-m.
An interior column for a tall concrete structure carries a dead load of 2200 kN and live load of 2300 kN. The column is 500x500 mm. in cross section and is reinforced with ten No. 36 bars. The column will be supported on a square footing, with the bottom of the footing 1.5 m below grade. Use:Unit weight of soil (fill) = 16 kN/m3Unit weight of concrete = 24 kN/m3Allowable soil bearing pressure (qa) = 370 kN/m2Material Strength for the footing ??′ = 35 MPa and??=420 MPaIf effective depth of the footing may assume as d = 800 mm, design the footing width, amount and placement of all reinforcement, including length and placement of dowel steel.
A wall footing is used to support a 300 mm. reinforced concrete wall carrying a dead load of 292 kN/m and a live load of 220 kN/m. The footing has a total thickness of 450 mm. with a steel covering of 75 mm. The bottom of the footing is 1.2 m. below the final ground surface. Allowable soil pressure is 199.70 kPa. Weight of soil is 15.7 kN/m3. fc' = 27.6 MPa. fy = 276.5 MPa. Weight of concrete is 23.5 kN/m3. 4. Which of the following gives the difference between the furnished and the allowable development length of steel reinforcement at the wall footing. Use ACI Specs.
A wall footing is used to support a 300 mm. reinforced concrete wall carrying a dead load of 292 kN/m and a live load of 220 kN/m. The footing has a total thickness of 450 mm. with a steel covering of 75 mm. The bottom of the footing is 1.2 m. below the final ground surface. Allowable soil pressure is 199.70 kPa. Weight of soil is 15.7 kN/m3. fc' = 27.6 MPa. fy = 276.5 MPa. Weight of concrete is 23.5 kN/m3 1. Which of the following gives the required length of footing
Design economical spacing of 10 mm diameter stirrups for the beam which carries the loads shown. Design shear reinforcement of prestressed beam with the following properties listed. Properties: f’c = 28 MPafy = 276 MPaAps = 800 mm2Ds = 10 mmDm = 18 mmfse = 800 MPafpu = 1500 MPafpe = 860 MPaPe = 250 kN
A wall footing is used to support a 300 mm. reinforced concrete wall carrying a dead load of 292 kN/m and a live load of 220 kN/m. The footing has a total thickness of 450 mm. with a steel covering of 75 mm. The bottom of the footing is 1.2 m. below the final ground surface. Allowable soil pressure is 199.70 kPa. Weight of soil is 15.7 kN/m3. fc' = 27.6 MPa. fy = 276.5 MPa. Weight of concrete is 23.5 kN/m3 2. Which of the following gives the nominal shear stress of the footing