You measure the following deflections along the length of a simply-supported uniform beam. Compute for the slope and moment (in N- m) at 0.75 m. Use the following parameter values in your computation: E = 200 GPa, and I = 0.0003 m X, meters (length along the beam) 0.375 0.75 1.125 1.5 1.875 Y, centimeters 20.2571 20.9484 21.9689 23.2262 24.6414 Hint: M(x) OP dx El

You measure the following deflections along the length of a simply-supported uniform beam. Compute for the slope and moment (in N- m) at 0.75 m. Use the following parameter values in your computation: E = 200 GPa, and I = 0.0003 m X, meters (length along the beam) 0.375 0.75 1.125 1.5 1.875 Y, centimeters 20.2571 20.9484 21.9689 23.2262 24.6414 Hint: M(x) OP dx El

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

For the beam loaded as shown, determine the slope at point C, and deflection at points A and D. Assume EI as constant with E = 200,000 MPa and I = 15x107 mm4.
Determine the slope and deflection at point B of the beam shown if the figure. Let ? = 29x10^3 ??? and I= 800??^4.
If E = 200,000 MPa and I = 1050x10^6??4 for the beam below, determine the: a) Deflection at C using the double integration method b) Deflection and slope at midspan using the area moment method.
By Conjugate Beam Method, If E= 200,000 MPa and I= 20,000,000 mm4. Determine the slope at A and Deflection at B
Using Superposition Method: Determine the midspan deflection of the beam in millimeters shown in the figure if E = 9 GPa and I = 21000000 mm4.
Using Virtual Work Method, Determine the slope and deflection of point C in the figure. E = 70 GPa, I=120(10)^6 mm^4
Using Double Integration Method, calculate the maximum deflection of the beam shown. Given: L = 3.7m , E = 10 GPa , I = 32.1x106mm4 w = 2.1 kN/m
Given a cantilever beam of length 2.3m. The left support “A” is fixed while the right end "B" is free. With constant E=200GPa and 1=5000000mm 4. A counter-clockwise moment of 13KN-m is applied at "B". Using Double Integration Method, what is the deflection at B in millimeters? Express your answer in 3 decimal places.
The continuous beam shown in the figure is fixed at both ends A and D, and supported by rollers at B and C Assume I = 800 x 106 mm4 and E = 70,000 MPa. W1 (kN/m) = 25 F (kN) = 50 S (mm) = 15 If there is a settlement of S at the support C, solve the following using slope deflection method: 1. Slope at B, in radians
Please use Double Integration method to determine slope (Ɵ) and deflection (Δ) at point B and D based on the following structure! (E = 2.105 kg/cm2, I = 208.33 cm4)
Determine the rotation θ and/or the deflection v at the points indicated on the beams in Figure c. Use the method of area moments.Take E = 200 GPa and I = 500 × 106 mm4
For the structure shown in Figure, apply virtual work to calculate i) the vertical deflection at Joint B, and ii) the horizontal deflection at Joint C.