1. A 240 mm dia. steam pipe, 200 m long is covered with 50 mm of high temperature insulation of thermal conductivity 0.092 W/m-K and 50 mm low temperature insulation of thermal conductivity 0.062 W/m-K. The inner and outer surface temperatures are maintained at 340°C and 35°C respectively. Calculate the following in SI unit:

1. A 240 mm dia. steam pipe, 200 m long is covered with 50 mm of high temperature insulation of thermal conductivity 0.092 W/m-K and 50 mm low temperature insulation of thermal conductivity 0.062 W/m-K. The inner and outer surface temperatures are maintained at 340°C and 35°C respectively. Calculate the following in SI unit:

Precision Machining Technology (MindTap Course List)

2nd Edition

ISBN:9781285444543

Author:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Publisher:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Chapter2: Measurement, Materials, And Safety

Section2.6: Metal Composition And Classification

Problem 6RQ: Small particles of________ alloys are flammable.

See similar textbooks

Similar questions

Requirements: 1. Fill the tables. 2. Calculate the thermal conductivity and the thermal resistance. Comment on results. 3. Plot the measured values for temperature difference over the electrical power. please don't reject the question. Thank you
In mechanical resistance
Consider an insulated pipe exposed to the atmosphere, then the critical radius of insulation: Select one: A. Will be Greater in Calm days. B. Will be Greater in Windy days. C. Will be the same regardless of weather conditions. D. Can be greater in calm days or lower depending on other operating conditions.
Describe the process of Control of Heat Loss by Conduction?
T1 and T2 in brass rod in thermal conductivity test are located in direction that Select one: a. T2 on the heating side and T1 on the cooling side b. T1 and T2 are both on the cooling side c. T1 and T2 are both on the heating side d. T1 on the heating side and T2 on the cooling side
Choose the wrong statement. Heat transfer by conduction depends on thickness of the material temperature difference of the material type of material cross-sectional area of the material none of the above
The insulation ability of an insulator with the presence of moisture would Increase Decrease Remain unaffected May increase/ decrease depending on temperature and thickness of insulation
7. Which of the following is false: a. The coefficient of thermal expansion is larger if the bond energy is smaller b. Ceramics are generally ionic bonding c. Van der Waals bonding is generally stronger than covalent bonding d. The free electrons in metallic bonding is reason for electrical conductivity 8. Which of the following is true: a. Polymers are generally denser than ceranmics b. Young's modulus of ceramics are similar to polymers c. Composites have higher tensile strength than metals d. Ceramics have low resistance to fracture than metals
Thermal conductivity of solid metals with rise in temperature normally Select one: a. unpredictable O b. increases O c. decreases O d. remains constant
. thermodynamics- A platinum resistance thermometer has a resistance of 5 ohm at 0°C and 2.5 ohm at 100°C Calculate the temperature when the resistance indicated is 10 ohm.
Hon # 41 (s. What type of insulation cannot be stripped with thermal strippers? C PTFE C silicon rubber C PVC Answer Next Figure Back Mark
Heat transfer through insulation systems may include several modes: conduction through the solid materials conduction or convection through the air in the void spaces radiation exchange between the surfaces of the solid matrix O All of these