1. A transmission line conductor is supported from two towers at heights of 70 m above water level. The horizontal distance between the towers is 300 m. If the tension in the conductors is 1500 kg, find the clearance at a point mid-way between the towers. The size of the conductor is 0·9 cm2 and density of conductor material is 8·9 gm/cm3. 1. A transmission line conductor is supported from two towers at heights of 70 m above water level. Thehorizontal distance between the towers is 300 m. If the tension in the conductors is 1500 kg, find theclearance at a point mid-way between the towers. The size of the conductor is 0-9 cm´ and density ofconductor material is 8.9 gm/cm.[64 m]

Given, Height of the two towers =70m Distance(l) =300m Tension(T) =1500kg Size of conductor(A)…

1. A transmission line conductor is supported from two towers at heights of 70 m above water level. The horizontal distance between the towers is 300 m. If the tension in the conductors is 1500 kg, find the clearance at a point mid-way between the towers. The size of the conductor is 0-9 cm´ and density of conductor material is 8-9 gm/cm’. [64 m]

1. A transmission line conductor is supported from two towers at heights of 70 m above water level. The horizontal distance between the towers is 300 m. If the tension in the conductors is 1500 kg, find the clearance at a point mid-way between the towers. The size of the conductor is 0-9 cm´ and density of conductor material is 8-9 gm/cm’. [64 m]

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter4: Transmission Line Parameters

Section: Chapter Questions

Problem 4.11MCQ

See similar textbooks

Similar questions

Find the inductive reactance per mile of a single-phase overhead transmission line operating at 60 Hz given the conductors to be Partridge and the spacing between centers to be 30 ft.
If the ratio of the inner conductor circumference to the outer conductor circumference of a coaxial cable is 0.4993, what is the capacitance per unit length of the air-insulated coaxial line, in pF/m?
The span of the same level transmission line is 300 m. The diameter of the conductor is 15 mm. Wind pressure intensity over the projected area is 45 kg/m²? If the density of the conductor material is 8900 kg/dm, find the sag. Also calculate the vertical sag. The ultimate tensile stress of the conductor is 5000 kg/cm²? Assume a factor
The geometric mean radius of the conductor in a 380 kV, 120 km long transmission line 24mm. The roughness factor of the conductor is 0,98. Geometric mean length between phases of conductors 3,2 m. Air pressure across the line 725 mmHg, temperature 18 degrees Celcius and the conductor surface temperature is 85 degrees Celsius.According to this,a) Calculate the voltage at which ionization starts and the corona voltage.b) Find the corona loss for operating voltage with Peek formula.c) Calculate the total corona loss of the line with the Peek formula for a 15% increase in operating voltage.
The conductors of a 10 km long, single phase, two wire line are seperated by a distance of 1.5 m. The diameter of each conductor is 1 cm. If the conductors are of copper, the inductance of the circuit is ??
It is viewed from the cross-section of a coaxial cable consisting of a cylindrical conductive tube with an internal radius R and an outer radius of Rz wrapped around a cylindrical conductive wire with a RADIUS of R. r to indicate the radial distance from the center, the inner cylindrical conductor,if it is j1 = Gr and the outer conductive tube, j2 = Car has improper current densities. Here, the two conductors carry the same I flow in zit directions. What is the size of the B2 magnetic fields at r=1 cm and B2 at r= 8 cm?(R=4 cm; R=7 cm, R3=9 cm; Io=2 A; uo=47.10-7 T.m/A and our aquani-positive forehead outward from the page plane).
A 3 phase 140 kV line with 43.715 cm of distance separation between the conductor so that corona takes place if the line voltage exceeds 250 kV (r.m.s.). If the value of potential gradient at which ionization occurs can be taken as 30 kV (max) per cm, and if the temperature is 40°C and atmospheric pressure is 76 cm, find the radius of the conductor.
A lossless coaxial cable transmission line has L = 200 uH/ft and C = 100 nF/ft. The inner diameter of the outer conductor is 3cm and the diameter of the inner conductor is 1cm. What is the dielectric constant of the insulator?
A 10 km long, transmission-line has two parallel conductors placed 2 metres apart. The diameter of each conductor is 1·4 cm. Calculate the DC resistance of 1 km length of the conductor [Resistivity of material = 2.83x10-8 Ω-m]
The ratio of the inner conductor perimeter to the outer conductor perimeter of a coaxial cable is 0.4993 and how many structure capacitance pF/m is the insulated coaxial line?
an overhead transmission line at a river crossing is supported from 2 towers at heights of 60m above the water level, the horizontal distance between the towers being 400m. If the allowable horizontal tension is 336.2 kg and the conductor heights 0.5kg/m, find the clearance between the conductor and water at a point midway between the towers
A lossless coaxial cable transmission line has L = 200 uH/ft and C = 100 nF/ft. The inner diameter of the outer conductor is 3 cm and the diameter of the inner conductor is 1 cm. What is the dielectric constant of the insulator?