1. Choose 1 type of statically determinate beam. 2. Divide the chosen beam into 3 spans, AB, BC, CD. The length of the beam is your own choice. 3. Load each span with 1 type of loading of your choice. No two spans must have the same loading. Example. Span AB is loaded with 1 concentrated force, Span BC is loaded with a rectangular load and Span CD is loaded with a triangular load. You can also use more than 1 concentrated load in a span. 4. Using the constructed beam, determine the values of shear and moment at every meter of the span using the technical definition method. 5. Check your answers in #4 using the shear and moment equations. span

1. Choose 1 type of statically determinate beam. 2. Divide the chosen beam into 3 spans, AB, BC, CD. The length of the beam is your own choice. 3. Load each span with 1 type of loading of your choice. No two spans must have the same loading. Example. Span AB is loaded with 1 concentrated force, Span BC is loaded with a rectangular load and Span CD is loaded with a triangular load. You can also use more than 1 concentrated load in a span. 4. Using the constructed beam, determine the values of shear and moment at every meter of the span using the technical definition method. 5. Check your answers in #4 using the shear and moment equations. span

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter6: Beams And Cables

Section: Chapter Questions

Problem 6.42P: For the beam AB shown in Cases 1 and 2, derive and plot expressions for the shear force and bending...

See similar textbooks

Similar questions

A simply supported beam 6 m in span is supported at supports A and B. The beam is acted upon a concentrated load of 100 KN at point C which is 2 m from support A. Also a udl of 20 KN/m is spread from point D to point B, where point D is at a distance of 1 m from point C Find S.F. and B.M. at all points and draw S.F.D. and B.M.D.
When a beam has only uniformly distributed forces applied, the moment diagram consists of piecewise (answer) forces.
Question 1) in FIG loading condition is given beam F force F = 65 kN , first distributed load W 1 = 41 kN / m , w 2 distributed load w 2 = 51 kN / m , θ angle θ = 48 ° and L length of L = 5 m . According to this; Question 1-A) B at the point y direction ( B y ) Determine the support reactions. (Enter yourresultwithout writing kN units.) Question 1-B) to the point in y direction ( A y ) Determine the support reactions. ( Enter yourresult without writing kN units.) Question 1-C) to the point in x direction ( A x ) Determine the support reactions. ( Enter yourresult without writing kN units.)
A simply supported beam of length “L” is subjected to linearly varying load distribution. The magnitude of the left end of the linearly varying load distribution is Zero and the magnitude of the right end of the linearly varyingload distribution is Q. Draw the shear force diagram (SFD) and bending moment diagram (BMD) over the span length and also find the magnitude of maximum bending moment and its position.
Find the support reactions, draw the free-body diagram of the beams that shows the reactions and the equivalent loadings of the beams. Show the computation where Mo = 14,688 lb-in, Wo = 750 lb/ft, a = 12 ft, b = 4 ft, c = 7 ft.
Please answer following: given: - Flexural rigidity of beam= 85000 kNm2 Determine: - General moment equation. - Slope equation of the beam - Deflection equation of the beam.
A beam 19 ft in length has concentrated live loads of 6 kips and 9 kips at 5 ft and 13 ft, respectively, from the left-hand support. In addition, there is a uniformly distributed dead load of 1.2 kips/ft beginning 5 ft from the left support and continuing to the right support. Design the beam for flexure.
A beam (assume weightless) is placed horizontally with the left end as a pinned support and right end as a roller support. The beam is subject to three vertically applied forces as shown right. Please find: a) Show shear force plot b) Show moment plot
Find the support reactions, draw the free-body diagram of the beams that shows the reactions and the equivalent loadings of the beams. Show the computation where Wa = 1.5 kip/ft, Wb = 900 lb/ft, a = 7 ft, b = 10 ft
a)??? b) left to the point of application of force P. The cross sectional area of the beam is 300 cm2 tgroughout the beam.
A Simply supported beam of effective span 6 m carries three point loads of 30 KN, 25 KN and 40 KN at 1m, 3m and 4.5m respectively from the left support. Draw the SFD and BMD. Indicating values at salient points.
Draw the free-body diagram for the following problem.The beam shown.