1. Steam at 5.0mpa, 410°c expands in a Rankine engine to 0.036MPa. For 60 000kg/hr of steam, determine the work, the thermal efficiency, and the steam rate a) For the ideal cycle, b) For the actual engine with the same specification, the brake steam rate is 4.35 kg/kw.hr and the driven electric generator with efficiency of 94%. Find eb, nb,

1. Steam at 5.0mpa, 410°c expands in a Rankine engine to 0.036MPa. For 60 000kg/hr of steam, determine the work, the thermal efficiency, and the steam rate a) For the ideal cycle, b) For the actual engine with the same specification, the brake steam rate is 4.35 kg/kw.hr and the driven electric generator with efficiency of 94%. Find eb, nb,

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

1. In a steam power cycle, steam enters the turbine at 30bar with the following different conditions and leaves at 1bar. Calculate Carnot efficiency, Rankine efficiency, condenser heat flow in kW assuming mass flow rate of steam as 9.5kg/s and steam rate for each case considering the pump work. (ii)Wet with 0.95 dryness (iii) Superheat at 550°C
A 136 kg/s steam with an inlet condition of 52 bar, 400 C enters a rankine turbine and expands to 36 kPa. determine the work, the thermal efficiency, and the steam rate (a) for the cycle, (b) for the turbine. (c) With the same specifications, consider the steam expanded on an actual turbine and the brake steam rate is 4800 g/kwh and the driven electric generator has an efficiency of 0.93. Find Brake Thermal Eff, Brake Engine Eff, Combined Work, and quality or temperature of actual exhaust steam
Steam with 136 kg/s at 5.0 Mpa, 420oC expands in a Rankine turbine to 0.036546 Mpa.a) For Rankine cycle, determine the heat added, heat rejected, turbine work, pump workand cycle efficiency.b) For Rankine engine, determine the heat added, net work, and engine efficiency.(Note: Draw the schematic and T-s diagram)
1. In a steam power cycle, steam enters the turbine at 30bar with the following different conditions and leaves at 1bar. Calculate Carnot efficiency, Rankine efficiency, condenser heat flow in kW assuming mass flow rate of steam as 9.5kg/s and steam rate for each case considering the pump work. Using mollier diagram (ii)Wet with 0.95 dryness
Q1 : In a steam power plant , steam enters at 8 MPa and 700 C , the condenser pressure is 8 kPa , and the net power out of the plant is J100MW . Determine enthalpy and entropy at point 1, dryness frection , and enthalpy and entropy at point 2 , enthalpy and entropy at point 3 , work torbine , work net , Qadd to boiler , thermal efficency for cycle , Q rejeted from condenser , mass flow rate of steam , Q rejeted from condenser
A rankine turbo generator unit receives 27000kg/h of steam at 1.2mpa and superheat by 122 degree. Condensate leaves at 22°c. For a brake steam rate of 4.74 kg/kwh, mechanical efficiency of 94%, determine (a) the ideal cycle thermal efficiency, (b) the indicated engine efficiency, (c) the condition of turbine actual exhaust, and (d) the turbo generator output in kw.
A regenerative steam power plant uses a turbine with throttle pressure of 3.8 MPaa at 380°C and a condensing pressure at 0.01 MPaa. Steam are extracted at the following pressure: 2.0 MPaa, 1.0 MPaa, and at 0.2 MPaa. For the ideal cycle, Find Worknet in kJ/kg Find thermal efficiency in %
for a rankine cycle, steam at 5 Mpa, 450 C expands to 0.036 Mpa. for 10 kg/s of steam, determine: a. heat added b. heat rejected c. work of turbine d. thermal efficiency
Thermodynamics The actual cycle of a 5T diesel engine, with a displacement of 7000 cm³ , 2,400 rpm is approximate to the theoretical cycle represented in the figure below, in which the custom rectangle has the area of the same cycle. A compression ratio is 17 and the thermal efficiency is 0.597 when 26.3% of the heat is provided isochorically. It is adopted that the active liquid has ϒ = 1.35 and R = 240J / KgK. To determine a) The values of p T and v at the main points of the cycle; b) The power of the cycle. c) Expansion work.
In a gas turbine plant working on air standard Brayton cycle, the air at inlet is at 27°C temperature ,0.1 MPa pressure respectively.The pressure is 6.25 and maximum temperature is 800° C the turbine and compressor efficiencies are each 80%. Find per kg of air; i) The compressor work ii)The turbine work iii) The cycle efficiency iv) The turbine exhaust temperature
In a test of cycle steam power plant, the measured rate of the steam supply was 7.1kg / s when the net rate of work output was 5000Kw. The feed water was supplied to the boiler at a temp of 38 ° C, and the superheated steam leaving the boiler was at 1.4 Mpa and 300 ° C. Calculate the thermal efficiency of the cycle and the heat rate, what would be the heat rate when expressed in BTU of heat input per kWh of work output.
Steam at 100 bar, 625 C is received by a rankine engine and exhaust at 2 bar. (a) For an ideal engine, find work, steam rate, thermal efficiency and. (b) for actual engine, brake engine efficiency is 85% and generator efficiency is 94%. The driven generator produces 30 MW. Find combined work, combined thermal efficiency, actual exhaust enthalpy, mass flow rate of steam.