1 needs solution/explanation. please type the solution if you can because i cannot see handwritten sometimes. i will upvote tyUse the following data when needed: ρwater=1000 kg/m^3 , g = 9.80 m/s2 and 1 atm = 1.013 × 105 Pa. 1. Water flows through a pipe with 6.0 cm in diameter at 2.0 m/s. At the end of the pipe the diameter is reduce to3.0 cm, what is the speed of water flow at this point?a) 4.0 m/sb) 8.0 m/sc) 16 m/sd) 32 m/s

The problem is based on the equation of continuity in fluid mechanics, which states that in any…

1. Water flows through a pipe with 6.0 cm in diameter at 2.0 m/s. At the end of the pipe the diameter is reduce to 3.0 cm, what is the speed of water flow at this point? a) 4.0 m/s b) 8.0 m/s c) 16 m/s d) 32 m/s

1. Water flows through a pipe with 6.0 cm in diameter at 2.0 m/s. At the end of the pipe the diameter is reduce to 3.0 cm, what is the speed of water flow at this point? a) 4.0 m/s b) 8.0 m/s c) 16 m/s d) 32 m/s

College Physics

10th Edition

ISBN:9781285737027

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter9: Solids And Fluids

Section: Chapter Questions

Problem 72P

See similar textbooks

Related questions

Q: Set up an integral for fluid force against the vertical plate submerged in a fluid with weight…

Q: A cube of wood having an edge dimension of 20.7 cm and a density of 655 kg/m³ floats on water. (a)…

A: Given:Edge dimension of cube, a = 20.7 cmdensity of cube of wood, ρ0 = 655 kg/m3

Q: A cowboy at a dude ranch fills a horse trough that is 1.53 m long, 61 cm wide, and 42 cm deep. He…

A: The expression for volume rate flow is, Vt=Av…

Q: Liquid of density 945 kg/m is flowing through a pipe as shown in the diagram below. At point A, the…

A: Answer B) -1.36 X 10^6 Pa

Q: The water inside a pipe (cross-sectional-area = 0.080 m²) has a velocity of 4.0 m/s. What would be…

A: Cross-sectional Area 1: A1 = 0.080 m2. Speed of water at A1 = v1 = 4.0 m/s Cross-sectional Area 2:…

Q: A cube of wood having an edge dimension of 21.7 cm and a density of 651 ka/m? floats on water. (a)…

Q: The dam is 500 m wide, and the water is 80.0 m deep at the dam. (a) What is the average pressure on…

Q: It is determined by immersing a crow in water that its volume is 26 inches cubed. (a) What would…

A: Given: The volume of crow is V=26 in3. Part (a) The density of gold is Dw=1200 lb/ft3. The…

Q: "A water enters a cylindrical pipe with a cross-sectional radius of 1 m with a speed of 2 m/s. If…

A: Given data: Radius at inlet is, r1=1 m. Speed at inlet is, v1=2 m/s. Radius at exit is, r2=3 m.

Q: What is the difference between the hydrostatic pressure of blood between the brain and the soles of…

A: Write the equation for the hydrostatic pressure of blood between the brain and the soles of the feet…

Q: O P= pgh

Q: When your urinary bladder is full, the bladder pressure can reach up to 60 mm H20. What is this…

Q: 1. Find the pressure increase in the fluid of a syringe when a nurse applies a force of 42N to the…

A: The applied force,

Q: 12 point VA VB An unknown fluid flows through a horizontal pipe with a decreasing square cross…

A: Given : The velocity of the fluid at the point A is vA = 4.7 m/s and the cross-section is…

Q: Gasoline is piped underground from refineries to major users. The flow rate is 3.00 X 10-2 m3/s…

A: Given data: The flow rate of the gasoline is Q=3.00x10-2 m3/s. The viscosity of the gasoline is…

Q: A cube of wood having an edge dimension of 20.9 cm and a density of 647 kg/m3 floats on water. (a)…

Q: Water flowing through a garden hose of diameter 2.72 cm fills a 22.0-L bucket in 1.45 min. (a) What…

Q: To determine the absolute pressure of a static (unmoving) fluid, we can apply the following concept.…

Q: (I) If the force F needed to move the wire in Fig. 10–34 is 3.4 x 10-3 N, calculate the surface…

Q: How much faster will water flow through a hose with diameter 2.90 cm, compared to an identical hose…

A: By equation of continuity A1V1= A2V2 d1= 2.9cm d2= 1.2cm

Q: What the cup? Consider the pressured cup shown in the figure at the right (PH,0 = 997 [kg/m³]). The…

A: Given: Density of water = 997 kg/m3 Pressure at A, PA = 2Patm Height of A, hA = 50 m Height of B,…

Q: Water is flowing in a pipe if varying cross-sectional area, and at all points the water completely…

Q: npleu, wilal is the hew net force on the dam? Problem #2: Fire hoses used in major structural fires…

Q: A 3.2-N force is applied to the plunger of a hypodermicneedle. If the diameter of the plunger is 1.3…

A: Given Force on Plunger FP = 3.2 N Diameter of the plunger DP = 1.3 cm = 1.3 x 10-2 m Diameter of the…

Q: Apump is used to push water of density p througha tube of constant crossection A shown below. What…

A: Bernoulli's equation says that the amount of pressure in a liquid is dependent on the speed of the…

Q: Water is moving at a velocity of 2.00 m/s through a hose with an internal diameter of 1.60 cm. (a)…

A: velocity, V = 2 m/s internal diameter, D = 1.6 cm Velocity, v = 15 m/s

Q: Unreasonable Results - A fairly large garden hose has an internal radius of 0.600 cm and a length of…

A: r=Radius of pipe=0.6 cml=Length of pipe=23 mQ=Flow rate=50 L/sη=Viscosity of water=1.005×10−3…

Q: _2. The specific gravity of certain metal is 1.93. What is its density? b) 193 kg/m³ a) 19.3 kg/m³…

A: Specific gravity is the comparison between the density of an object to the density of water and the…

Q: 1. Which of the following is NOT a unit of pressure? A.Atm C. Pascal B.N/m2 D.…

A: There are three different questions. According to guideline I solve only first one. Please post…

Q: Water flows from a pipe of diameter d to a large pipe of diameter 2d. If the speed of water in the…

A: Dear student The equation of continuity is given for relating velocities of fluid in a pipe as: A1V1…

Q: A cube of wood having an edge dimension of 20.1 cm and a density of 649 kg/m³ floats on water. (a)…

A: Volume is the mass multiply by density.

Q: (II) What is the volume rate of flow of water from a 1.85-cm-diameter faucet if the pressure head is…

A: Given: To determine the volume rate of flow of water from a 1.85-cm-diameter faucet if the pressure…

Q: 1.Consider a block of wood that floats with 60% of its volume above water along a portion of creek…

Q: 1) A statue of 125-kg in air is submerged in the ocean for Scuba divers in an underwater sanctuary.…

Q: 1. Water flows at 1.73 m/s from a horizontal hose with a cross-sectional area of 4.00 cm² into a…

A: The equation of continuity is a v =constant where, a is the area and v is the velocity.

Q: Q1: The water in a tank is pressurized by air, and the pressure is measured by a multi-fluid…

A: H1 = 0.2 m H2 = 0.3 m H3 = 0.46m ρmer = 13.6 g/cm3 = 13600 kg/m3 ρoil = 0.85 g/cm3 = 850 kg/m3 To…

Q: 3) What is the fluid speed (in m/s) in a fire hose with a 7.00 cm diameter carrying 73.0L of water…

Q: (I) How fast does water flow from a hole at the bottom of a very wide, 4.7-m-deep storage tank…

A: Consider two points A and B. Point A denotes the free surface of water on the top of the tank and…

Q: Suppose a glass capillary tube has a 0.495-mm radius. Part (a) How high, in centimeters, will…

Q: Gasoline is piped underground from refineries to majorusers. The flow rate is 3.00×10–2 m3 /s (about…

A: The equation for velocity of flow can be obtained using the equation for the volume flow rate as

Q: Water flows at 1.73 m/s from a horizontal hose with a cross-sectional area of 4.00 cm2 into a hose…

A: The formula for the flow rate is given as Q=Av

Q: Water (Pwater = 1000. [kg/m³]) is flowing through a bent cylindrical pipeline shown. The radii of…

Q: The pressure drop along a length of artery is 104 Pa, the radius is 8.5 mm, and the flow is laminar.…

Q: ater moves through a constricted pipe in steady, ideal flow with a velocity of 1.40 m/s at the…

A: at initial point speed = V1= 1.4 m/s radius = r1= 4 cm = 0.04 m pressure = P1= 150 x 103 pa at final…

Q: When connected to a standpipe, a fire hose 5.29 cm in diameter must deliver a minimum flow rate of…

A: Diameter given, 5.29 cm

Q: Oil (p = 920 kg/m³) is flowing through a pipeline at a speed of 1.88 m/s. If the diameter of the…

Q: 2. Find the work done in pumping out all fluid of density 3 kg/m³ in the tank from a small hole at…

Question

needs solution/explanation.

please type the solution if you can because i cannot see handwritten sometimes. i will upvote ty

Use the following data when needed: ρwater=1000 kg/m^3 , g = 9.80 m/s2 and 1 atm = 1.013 × 105 Pa.

1. Water flows through a pipe with 6.0 cm in diameter at 2.0 m/s. At the end of the pipe the diameter is reduce to
3.0 cm, what is the speed of water flow at this point?
a) 4.0 m/s
b) 8.0 m/s
c) 16 m/s
d) 32 m/s

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Similar questions

What force must be exerted on the master cylinder of a hydraulic lift to support the weight of a 2000-kg car (a large car) resting on the slave cylinder? The master cylinder has a 2.00-cm diameter and the slave has a 24.0-cm diameter.
A sump pump (used to drain water from the basement of houses built below the water table) is draining a flooded basement at the rate of 0.750 us, with an output pressure of 3.00105 N/m2. (a) The water enters a hose with a 3.00-cm inside diameter and rises 2.50 m above the pump. What is its pressure at this point? (b) The hose goes over the foundation wall, losing 0.500 m in height, and widens to 4.00 cm in diameter. What is the pressure now? You may neglect frictional losses in both parts of the problem.
Water emerges straight down from a faucet with a 1.80-cm diameter at a speed of 0.500 m/s. (Because of the construction of the faucet, there is no variation in speed across the stream.) (a) What is the flow rate in cm3/s? (b) What is the diameter of the stream 0.200 m below the faucet? Neglect any effects due to surface tension.
Pascal’s Principle and Hydraulics 59. How much pressure is transmitted in the hydraulic system considered in Example 14.3? Express your answer in atmospheres.
The water supply of a building is fed through a main pipe 6.00 cm in diameter. A 2.00-cm-diameter faucet tap, located 2.00 m above the main pipe, is observed to fill a 25.0-L container in 30.0 s. (a) What is the speed at which the water leaves the faucet? (b) What is the gauge pressure in the 6-cm main pipe? Assume the faucet is the only leak in the building.
Explain why the fluid reaches equal levels on either side of a manometer if both sides are open to the atmosphere, even if the tubes are of different diameters.
, Water flows straight down from an open faucet (Figure 4.55). The cross-sectional area of the faucet is 1.8 10-4 ma, and the speed of the water as it leaves me faucet is 0.85 m/s. Ignoring air resistance, find the cross-sectional area of the water stream at a point 0.10 m below the faucet opening.
Figure 11.35(a) shows the effect of tube radius on the height to which capillary action can raise a fluid. (a) Calculate the height h for water in a glass tube with a radius of 0.900 cm—a rather large tube like the one on the left. (b) What is the radius of the glass tube on the right if it raises water to 4.00 cm?
Calculate the Reynolds numbers for the flow of water through (a) a nozzle with a radius of 0.250 cm and (b) a garden hose with a radius of 0.900 cm, when the nozzle is attached to the hose. The flow rate through hose and nozzle is 0.500 us. Can the flow in either possibly be laminar?
(a) Verify that a 19.0% decrease in laminar flow through a tube is caused by a 5.00% decrease in radius, assuming that all other factors remain constant, as stated in the text. (b) What increase in flow is obtained from a 5.00% increase in radius, again assuming all other factors remain constant?
The Huka Falls on the Waikato River is one of New Zealand's most visited natural tourist attractions (see Figure 12.29). On average the river has a flow rate of about 300,000 L/S. At the gorge, the river narrows to 20 m wide and averages 20 m deep. (a) What is the average speed of the river in the gorge? (b) What is the average speed of the water in the river downstream of the falls when it widens to 60 m and its depth increases to an average of 40 m? Figure 12.29 The Huka Falls in Taupo, New Zealand, demonstrate flow rate. (credit: RaviGogna, Flickr)
The hydraulic system of a backhoe is used to lift a load as shown in Figure 11.45. (a) Calculate the force F the slave cylinder must exert to support the 400-kg load and the 150-kg brace and shovel. (b) What is the pressure in the hydraulic fluid if the slave cylinder is 2.50 cm in diameter? (c) What force would you have to exert on a lever with a mechanical advantage of 5.00 acting on a master cylinder 0.800 cm in diameter to create this pressure? Figure 11.45 Hydraulic and mechanical lever systems are used in heavy machinery such as this back hoe.