10-kW cooling load (i.e., ?̇ L) is to be served by operating an ideal vapor-compression refrigeration cycle with its evaporator at 400 kPa and its condenser at 800 kPa. If the compressor’s isentropic efficiency is set at 68%, determine (a) the mass flow rate of the refrigerant, in kg/min (b) the rate of heat rejection to the environment, in kW (c) the COP of the refrigerator

10-kW cooling load (i.e., ?̇ L) is to be served by operating an ideal vapor-compression refrigeration cycle with its evaporator at 400 kPa and its condenser at 800 kPa. If the compressor’s isentropic efficiency is set at 68%, determine (a) the mass flow rate of the refrigerant, in kg/min (b) the rate of heat rejection to the environment, in kW (c) the COP of the refrigerator

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 2RQ: The operating condition for the single compressor in a household refrigerator is the lowest box...

See similar textbooks

Similar questions

Refrigerators currently being manufactured in the United States are using______as their refrigerant.
Condensers in these refrigerators are all_______cooled.
The operating condition for the single compressor in a household refrigerator is the lowest box temperature, which is typically A. 0F B. -20F C. 20F D. 40F
What are the approximate temperature ranges tor low-, medium-, and high-temperature refrigeration applications?
The COP of vapor-compression refrigeration cycles improves when the refrigerant is subcooled before it enters the throttling valve. Can the refrigerant be subcooled indefinitely to maximize this effect, or is there a lower limit? Explain.
A standard vapor compression system produces 20 tons of refrigeration using r-12 while operating between a condenser temperature of 45 deg-C and an evaporator temperature of -25 deg-C. Determine the refrigerating effect per unit of refrigerant, circulation rate in kg/s, power supplied, COP, heat rejected in kW, the volume flow rate in L/s, and temperature at the compressor discharge. Please answer completely.
A standard vapor compression system produces 20 tons of refrigeration using R134a while operating between a condenser temperature of 45 deg-C and an evaporator temperature of -25 deg-C. Determine the refrigerating effect per unit of refrigerant, circulation rate in kg/s, power supplied, COP, heat rejected in kW, the volume flow rate in L/s, and temperature at the compressor discharge.
Why heat engines are intentionally equated at high temperatures?
Refrigerant 134a is the working fluid in a vapor- compression heat pump that provides 35 kW to heat a dwelling on a day when the outside temperature is below freezing. Saturated vapor enters the compressor at 1.6 bar, and saturated liquid exits the condenser, which operates at 8 bar. Determine, for isentropic compression: a- the refrigerant mass flow rate, in kg/s. b- the compressor power,in kW. c- The coefficient of performance. Recalculate the quantities in parts (b) and (c) for an isentropic compressor efficiency of 75%.
A standard vapor compression system produces 70.4 kW of refrigeration using R-12as a refrigerant while operating between a condenser temperature of 42 °C and anevaporator temperature of –25 °C.2.1 Draw the p-h diagram of the cycle. 2.2 Determine:(a) the refrigerating effect in kJ/kg, (b) the circulating rate in kg/s, (c) the power supplied, (d) the COP, (e) the heat rejected in kW, and(f) the volume flow rate in m3/s.
An R-12 standard refrigeration cycle operates at an evaporating pressure of 386 kPa and a condensing pressure of 1009 kPa. Show the effects of decreasing the vaporizing pressure to 270 kPa on the following: For a unit mass, (a) refrigerating effect, (b) COP, and (c) work. For a refrigerating capacity of 1 kW, (d) power, (e) mass flow rate, (f) heat rejected, and (g) volume flow rate.
Consider a refrigeration system that operates on an actual vapor-compression refrigeration cycle with refrigerant 134a as the working fluid with an isentropic efficiency of a compressor of 75.1%. The refrigerant enters the compressor as saturated vapor at 140 kPa and is compressed to 800 kPa. Determine the value of h2 in kj/hg, answer in 4 decimal places with unit analysis. Subject: Thermodynamics 2