i need the answer quickly Solve problem no. 14-123Refer problem 14-12214–122 A 1.8-m³ tank contains saturated air at 20°C and90 kPa. Determine (a) the mass of the dry air, (b) the spe-cific humidity, and (c) the enthalpy of the air per unit massof the dry air. Answers: (a) 1.88 kg, (b) 0.0166 kg H,O/kg dry air,(c) 62.2 kJ/kg dry airReconsider Prob. 14–122. Using appropriatesoftware, determine the properties of the air atthe initial state. Study the effect of heating the air at constantvolume until the pressure is 110 kPa. Plot the required heat14-123transfer, in kJ, as a function of pressure.

Note:As per our guidelines we are supposed to answer only one question. Kindly repost other…

14–122 A 1.8-m³ tank contains saturated air at 20°C and 90 kPa. Determine (a) the mass of the dry air, (b) the spe- cific humidity, and (c) the enthalpy of the air per unit mass of the dry air. Answers: (a) 1.88 kg, (b) 0.0166 kg H,0/kg dry air, (c) 62.2 kJ/kg dry air 14-123 Reconsider Prob. 14–122. Using appropriate

14–122 A 1.8-m³ tank contains saturated air at 20°C and 90 kPa. Determine (a) the mass of the dry air, (b) the spe- cific humidity, and (c) the enthalpy of the air per unit mass of the dry air. Answers: (a) 1.88 kg, (b) 0.0166 kg H,0/kg dry air, (c) 62.2 kJ/kg dry air 14-123 Reconsider Prob. 14–122. Using appropriate

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Air at 30 ºC with a dew point of 14ºC enters a textile dryer at a rate of 15.3 m3/min and leaves saturated. The dryer operates adiabatically. Use the psychrometric chart to determine the absolute humidity and humid volume of the entering air, and then use the results to determine the flow rate of dry air (kg/min) through the dryer, thefinal temperature of the air, and the rate (kg/min) at which water is evaporated in the dryer.
An air-conditioning system operates at a total pressure of 1 atm and consists of a heating section and anevaporative cooler. Air enters the heating section at 14°C and 60 percent relative humidity at a rate of 30m3/min, and it leaves the evaporative cooler at 25°C and 45 percent relatively humidity. Determine (a) thetemperature and relative humidity of the air when it leaves the heating section, (b) the rate of heat transfer in theheating section, and (c) the rate of water added to air in the evaporative cooler.
Humid air at 40 psia, 50oF, and 90 percent relative humidity is heated in a pipe at constant pressure to 120oF. Calculate the relative humidity at the pipe outlet and the amount of heat, in Btu/lbm dry air, required.
An air-conditioning system is to take in air at 1 atm, 34 °C, and 70 % relative humidityand deliver it at 22 °C and 50 % relative humidity. The air flows first over the coolingcoils, where it is cooled and dehumidified, and then over the resistance heating wires,where it is heated to the desired temperature. Assuming that the condensate is removedfrom the cooling section at 10°C, determine a) the rate of heat supply in the heating section, and b) the mass flow rate of the steam required in the humidifying section
Air enters the heating section of an air-conditioning at 1atm, 10C, and 70 percent relative humidity at a rate of 35m^3/min, and it leaves the humidifying section at 20C with a relative humidity of 90 percent. If the humidifier supplies wet steam at 100C, determine: The temperature and relative humidity of the air leaving the heating section The rate of heat transfer in the heating section
For air at 80 8C dry bulb temperature and 20 8C dew-point temperature, determine its humidity, relative humidity, wet bulb temperature, enthalpy, humidvolume and humid heat.
It is desired to reduce the temperature of the ambient air entering an air handling unit at a volumetric flow rate of 550 m3/min, at a temperature of 35°C and a relative humidity of 0.75 to 20°C and its relative humidity to 0.45. For this purpose, the air is first cooled to a temperature below the dew point by passing through a cooling coil, and after some moisture is taken by condensation, its temperature is increased to 20˚C by passing over a heating coil. In this way, the temperature of the ambient air at the outlet of the air handling unit is brought to 20˚C and its relative humidity to 0.45. It is assumed that the pressure remains constant at P=100 kPa. Relationships will be used in the calculations. a) Calculate the amount of moisture condensed per unit time.b) Find the amount of heat drawn from the air by the cooling coil.c) Calculate the amount of heat given to the air by the heating coil.d) Show the phase changes on the psychrometric diagram.
If the relative humidity of air is 77 % at 18.0°C, what is the partial pressure of water vapor in the air in the unit of kPa? The saturation water vapor pressure at 18.0°C is 2.07 kPa
discuss the effect of the property below in relation to SENSIBLE COOLING process. What happen to its RELATIVE HUMIDITY during the process? What happen to its SPECIFIC HUMIDITY during the process? What if the cooling process reaches the dew point temperature? What if the cooling process is below its dew point temperature?
An air-conditioning system operates at a total pressure of 1 atm and consists of a heating section and an evaporative cooler. Air enters the heating section at 15OC and 55 percent relative humidity at a rate of 30 m3 /min, and it leaves the evaporative cooler at 25OC and 45 percent relatively humidity. Determine the TOR.
Determine the relative humidity and dew point temperature of moist air at 95 F dry bulb temperature, 80 F thermodynamic wet bulb temperature, and 13.2 psia pressure.
Define the range of permissible values for the barometric pressure, relative humidity, and temperature in your environment.