A. bypass liquid line refrigerant around the meteringof anevaporatorpressure regulator is to16. The purposeCritica1. WhwdevicecolB. control evaporator temperature by controlling its2. ExppressurelargC. isolate parts of the system for serviceD. shut off the compressor if evaporator pressuregets too high3. Expstarittedefrostop.

The purpose of an evaporator pressure regulator is to _______ Answer: B. control evaporator…

16. The purpose of an evaporator pressure regulator is to A. bypass liquid line refrigerant around the metering bypass liquid line refrigerant around the metering device B. control evaporator temperature by controlling its pressure C. isolate parts of the system for service D. shut off the compressor if evaporator pressure gets too high defro intermitte

16. The purpose of an evaporator pressure regulator is to A. bypass liquid line refrigerant around the metering bypass liquid line refrigerant around the metering device B. control evaporator temperature by controlling its pressure C. isolate parts of the system for service D. shut off the compressor if evaporator pressure gets too high defro intermitte

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter47: High-pressure, Low-pressure, And Absorption Chilled-water Systems

Section: Chapter Questions

Problem 9RQ: The approach temperature for the evaporator is A. the difference between the suction and head...

See similar textbooks

Similar questions

The compressor used in low-pressure chillers is the A. centrifugal. B. screw. C. rotary. D. reciprocating.
The typical temperature difference between the entering air and the boiling refrigerant on a standard air-conditioning evaporator is ______F.
Why is a circulating brine system more attractive for ship refrigeration than individual evaporators?
The typical temperature difference between the enteringair and the boiling refrigerant on a standard airconditioningevaporator is ______°F.
Refrigerant 12 Condensing temperature = 46.2 oCEvaporating temperature = -3 oCTemperature of the suction vapor = -15.6oCRefrigerating Capacity for evaporator = 44 TONDetermine the COP
Determine the total power required for individual compressors for evaporator loads of 20 tons at 24ᵒF, 30 tons at 34ᵒF and 10 tons at 44ᵒF for an ammonia vapor compression system. Condensing temperature is 104 ᵒF. Two flash tank intercooler were used.
an ammonia system supplies chilled brine for a 10 ton load at 0F, a 2 ton load at 20F, and 4 ton load at 35F and must operate at a -10F, suction temperature. Compare the theoretical power requirements with that for three separate F-12 compressors using direct expansion. Condesing os 80 F with 10F sub-cooling, saturared vapour enters the compressor.
Does lowering suction temperature decrease the power input to a refrigerant compressor
Consideration in selecting of ideal type of compressor
Numerate the practical applications of vapor refrigeration system.
A single compressor using ammonia as refrigerant has three evaporators of capacity 30 TR, 20 TR and 10 TR. The temperature in the three evaporators is to be maintained at -10°C, 5°C and 10°C, respectively. The system is provided with individual expansion valve and back pressure valves. The condenser temperature is 40°C. Assume isentropic compression: a. Draw the P-h diagram. b. What is the mass of refrigerant flowing through each evaporator? c. What is the power required to drive the compressor? d. What is the COP of the system?
A T XV system responds to an overcharge of refrigerant by A. low suction pressure. B. high head pressure. C. a flooded compressor. D. both A and B