18-51 A long 35-cm-diameter cylindrical shaft made of stainless steel 304 (k = 14.9 W/mK, p = 7900 kg/m³, cp = 477 J/kg . K. and a = 3.95 x 10-6 m²/s) comes out of an oven at a uniform temperature of 500°C. The shaft is then allowed to cool slowly in a chamber at 150°C with an average convection heat transfer coefficient of h=60W/m² K Determine the temperature at the center of the shaft 20 min after the start of the cooling process. Also, determine the heat transfer per unit length of the shaft during this time period. Solve this problem using the analytical one-term approximation method Answers: 486°C 22.270 kl

18-51 A long 35-cm-diameter cylindrical shaft made of stainless steel 304 (k = 14.9 W/mK, p = 7900 kg/m³, cp = 477 J/kg . K. and a = 3.95 x 10-6 m²/s) comes out of an oven at a uniform temperature of 500°C. The shaft is then allowed to cool slowly in a chamber at 150°C with an average convection heat transfer coefficient of h=60W/m² K Determine the temperature at the center of the shaft 20 min after the start of the cooling process. Also, determine the heat transfer per unit length of the shaft during this time period. Solve this problem using the analytical one-term approximation method Answers: 486°C 22.270 kl

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Q4: A spherical object that is made of a material with specific heat=383 J/kg K , and density = 8954 kg/m’. The diameter of the sphere is 5-cm and it is initially at a uniform temperature of 150¢C. It is suddenly exposed to an environment at 20-C having a heat-transfer coefficient h=28W/m? -
A heating system is to be designed to keep the wings of an aircraft cruising at a veloeity of 900 km/h above freezing temperatures during flight at 12.200-m altitude where the standard atmospheric conditions are -55.4°C and 188 kPa. Approximating the wing as a cylinder of elliptical cross section whose minor axis is 30 cm and disregarding radiation, determine the average convection heat transfer coefficient on the wing surface and the average rate of heat transfer per unit surface area.
‏The nose section of the rocket is made up of a 6 mm thick stainless steel plate (p = 7800 kg/m°, c = 460 J/kg°C, k = 55 W/m°C). It is held initially at a uniform temperature of " T = 47°C. When the rocket enters the denser layers of the atmosphere at a very high velocity the effective temperature of the air surrounding the nose region attains the value 2150 °C; the surface convective heat transfer coefficient is estimated as 3395 W/m?°C. If the maximum metal temperature is not to exceed 1100°C, determine: (i) Maximum permissible time in these surroundings. (i) Inside surface temperature under these conditions.
A 60 mm thickness large steel plate (k=42.6 W/m deg C, alpha = 0.043 m^2/h), initially at 440 deg C is suddenly exposed on both sides to an environment with convective heat transfer coefficient 235 W/m^2 deg C, and temperature 50 deg C. Determine the center line temperature, and temperature inside the plate 15 mm from the mid-plane after 4.3 minutes.
In a food industry, pieces of meat with approximately 30 cm in diameter and 20 mm in thickness are stored in a industrial freezer and thawed by exposure to ambient air at 15°C with convective heat transfer coefficient equal to 10W/(m2.K). Consider a piece of meat that, when removed from the freezer, had a temperature of -12°C. For defrosting, the piece is hung on a "line", so that both larger surfaces are exposed to the ambient air. For frozen meat, the following properties can be assumed ρ=1090 kg/m3, cp=3.54 kJ/(kg.K), k=0.47 W/(m.K). Ask: (1) Indicating the control volume and the simplifications adopted, obtain the differential energy balance equation for the cooling the piece of meat and describe the conditions of outline and initial that apply to the process, justifying them; (2) Use the appropriate analytical solution to determine the time necessary for the complete defrosting of the part. The part is considered to be completely thawed when a minimum temperature of 5oC is reached…
A person is found dead at 5PM in a room whose temperature is 20°C. Thetemperature of the body is measured to be 25°C when found, Modeling thebody as a 30-cm-diameter, 1.70-m-long cylinder and the heat transfer coefficient estimated to be 8 W/m2·K. and using the lumped system analysis as a rough approximation, estimate the time of death of the person.
Engine oil at 54oC54oC flows over the upper surface of a 5m5m long plate whose temperature is 20oC20oC with a velocity of 2m/s2m/s. What is the heat transfer rate per unit width of the plate?
Number 3A food product with 73% moisture content in a 7 cm diameter can wants to be frozen. The density of the product is 970 kg/m³, the thermal conductivity is 1.2W/(m K), and the initial freezing temperature is -2.5°C. After 11 hours in the freezing medium -40°C, the product temperature becomes -10°C. Estimate the convection heat transfer coefficient of the freezing medium. Assume the can as an infinite cylinder. h= answer in W/(m²K)
Calculate the quantity of heat conducted per minute through a duralumin circular disc 119mm diameter and 22.65mm thick when the temperature drop across the thickness of the plate is 9.3°F take the coefficient of thermal conductivity of duralumin as 150 W/m-K. Answer: 22.833 kJ/min
What regime favors heat transfer and why?Laminar, Turbulent or Transitional
Water at 5°C is being used to cool apples from an initial temperature of 25° to 10°C. Thewater flow over the surface of the apple creates a convective heat-transfer coefficientof 15 W/(m2-K). Assume the apple can be described as a sphere with a 10 cm diameterand the geometric center is to be reduced to 10°C. The apple properties include thermalconductivity of 0.45 W/(m-K), specific heat of 3.950 kJ/(kg-K), and density of 940 kg/m3.a. Determine the time that the apples must be exposed to the water.b. If the apple is submerged only for 2 hours, what will be its center temperature?
A transformer that is L=20cm long, 6.2 cm wide, and 5 cm high is to becooled by attaching a 10 cm × 6.2 cm wide polished aluminum heatsink (emissivity =0.03) to its top surface. The heat sink has seven fins,which are 5 mm high, 2 mm thick, and 10 cm long. A fan blows air at25°C parallel to the passages between the fins. The heat sink is todissipate 20 W of heat and the base temperature of the heat sink is notto exceed 60°C. Assuming the fins and the base plate to be nearlyisothermal and the radiation heat transfer to be negligible, determinethe minimum free-stream velocity the fan needs to supply to avoidoverheating. (k=0.02681W/m˚C, Pr=0.7248, V= 1.726×10-5 m2/s, )