18. A wormgear set has a single-thread worm with a pitch diameter of 1.250 in, a diametral pitch of 10, and a nor- mal pressure angle of 14.5°. If the worm meshes with a wormgear having 40 teeth and a face width of 0.625 in, compute the gear pitch diameter, the center distance, and the velocity ratio. If the wormgear set is transmitting 924 lb in of torque at its output shaft. which is rotating at 30 rpm. compute forces on the

18. A wormgear set has a single-thread worm with a pitch diameter of 1.250 in, a diametral pitch of 10, and a nor- mal pressure angle of 14.5°. If the worm meshes with a wormgear having 40 teeth and a face width of 0.625 in, compute the gear pitch diameter, the center distance, and the velocity ratio. If the wormgear set is transmitting 924 lb in of torque at its output shaft. which is rotating at 30 rpm. compute forces on the

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Two involute gears of 20-degree pressure angle are in mesh. The number of teeth on pinion is 20 and the gear ratio is 2. If the pitch expressed in module is 5mm and the pitch line speed is 1.2m/s, assuming addendum as standard and equal to one module. Find a.) The angle turned through by pinion when one pair of teeth is in mesh and b.) The maximum velocity of sliding.
Two equal spur gears of 48 teeth mesh together with pitch radii of 4.0 in. and addenda of 0.1670in. If the pressure angle is 14 1⁄2 deg, calculate the length of action and contact ratio.
1. A worm gear has 52 teeth and a diametral pitch of 6. It mates with a triple threaded worm that rotates at 1750 rpm. The pitch diameter of the worm is 50 mm. a) Compute the circular pitch, b) The axial pitch, c) The lead and the lead angle, d) The pitch diameter of the worm gear,
Colegio de Muntinlupa fabricated a pair of spur gear 2.5 module (20° full depth involute tooth) and to be mounted on shafts with a centerline distance of 90 mm. The speed ratio required is 3:1. Determine the following: a. Pitch diameter of pinionb. Pitch diameter of gearc. Number of teeth of piniond. Number of teeth of geare. Circular pitch of pinionf. Circular pitch of gearg. Addendumh. Dedendumi. Clearancej. Whole depthk. Working Depthl. Backlashm. Tooth thicknessn. Tooth space widtho. Outside diameter of pinionp. Outside diameter of gearq. Root diameter of pinionr. Root diameter of gears. Base diameter of piniont. Base diameter of gear
Two involute gears in the mesh have a 20-degree pressure angle. gear ratio if 3 and no of teeth on the pinion is 24 and teeth have a module of 6 mmThe pitch line velocity is 1.5 m/s the addendum is equal to one module. Determine the velocity of the sliding at the beginning of contact.
Solve this problem in spur gearsA 17-tooth pinion meshes with an 84-tooth gear. The full-depth involute gear teeth have 20° pressureangle and a diametral pitch of 32. Determine the base pitch and the contact ratio. Also,calculate theaddendum, dedendum, circular pitch, tooth thickness, and the base diameter for the pinion and gear. Ifthe center distance isincreased by 0.125 in., what are the new valuesfor thecontact ratio and thepressureangle with complete solution and write in hand writing thank you
Two straight-toothed bevel gears mesh with a shaft angle of 90° and a diametral pitch of 5. The pinion has 20 teeth, and the gear ratio is 2:1. The addendum and dedendum are the same as for 20 stub teeth. For the gear, determine the pitch radius, cone angle, outside diameter, cone distance, and face width.
For a pair of standard gears, the module is m=2.5mm，pressure angle is α=20 0. ha*=1. c*=0.25. The teeth number on gear 1 is z1=22. The standard center distance is a=68.75mm. Calculate the contact ratio ε with the standard center distance a, 68.75mm. ε=( )
A pinion and gear with module 5 mm has a speed reduction ratio of 6 : 1. If centre distance is 420 mm, number of teeth on the pinion is _________ .
A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an electric wheelchair at a velocity that is double the maximum velocity slip. The pinion has an equal addendum as the gear wheel, a module of 3 mm, and a pressure angle of 14,5. The wheelchair has a maximum velocity of 5 m/s when it's pinion rotates at 800 rpm. Calculate : 1.1)The magnitude of the velocity of slip of gears in mesh 1.2)The angular speed of the gear wheel in rad/s 1.3)The maximum length of a path of the approach in mm 1.4)The length of a path of a recess in mm. 1.5) The addendum of the gears in mm. 1.6) The contact ratio
Two identical involute, spur gears are in mesh. The module is 4 mm and each gear has 22 teeth If the operating pressure angle is 20° The minimum value of addendum needed to ensure continuous transmission of motion is
Determine the pitch diameters of a worm gear set having a velocity ratio of 0.1 and a center distance of 2.5 in, if the worm has three teeth and a lead of 1 in.