2. A machine foundation has a base dimension of 6m x 2m with a span of 5 m, has a weight equal to 5 times the weight of the engine. Find: a. the maximum weight of the engine mounted if the bearing pressure of soil is 150 кра. b. the depth of the machine foundation c. sketch the machine foundation described.

2. A machine foundation has a base dimension of 6m x 2m with a span of 5 m, has a weight equal to 5 times the weight of the engine. Find: a. the maximum weight of the engine mounted if the bearing pressure of soil is 150 кра. b. the depth of the machine foundation c. sketch the machine foundation described.

Principles of Foundation Engineering (MindTap Course List)

9th Edition

ISBN:9781337705028

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter9: Settlement Of Shallow Foundations

Section: Chapter Questions

Problem 9.15P

See similar textbooks

Similar questions

A square column foundation has to carry a gross allowable load of 1805 kN (FS = 3). Given: Df = 1.5 m, =15.9 kN/m3, = 34, and c = 0. Use Terzaghis equation to determine the size of the foundation (B). Assume general shear failure.
The shallow foundation shown in Figure 6.25 measures 1.5 m × 2.25 m and is subjected to a centric load and a moment. If eB = 0.12 m, eL = 0.36 m, and the depth of the foundation is 0.8 m, determine the allowable load the foundation can carry. Use a factor of safety of 4. For the soil, we are told that unit weight γ = 17 kN/m3, friction angle ф′ = 35°, and cohesion c′ = 0.
A continuous foundation with a width of 1 m is located on a slope made of clay soil. Refer to Figure 5.19 and let Df = 1 m, H = 4 m, b = 2 m, γ = 16.8 kN/m3, c = cu = 68 kN/m2, Φ= 0, and β = 60°.a. Determine the allowable bearing capacity of the foundation. Let FS = 3.b. Plot a graph of the ultimate bearing capacity qu if b is changed from 0 to 6 m.
A square foundation is 1.5m x 1.5m in plan. The soil supporting the foundation has a friction angle '=20 and c'=15.2 kN/m². The unit weight of soil is y=17.8 kN/m². Determine the allowable gross load on the foundation with a factor of safety F,=4. Assume that the depth of the foundation D=1m and the general shear failure occur in the soils mass.
A square foundation is 1.5 m by 1.5 m in plan. The soil properties supporting the foundation have a friction angle of 28° and c = 15.2 kPa, unit weight = 19.8kN/m3• The depth of the footing is 2.0 m. Factor of safety is 3. Using Terzaghi's Bearing capacity equation, determine the design load on the foundation.
The shallow foundation shown in Figure 4.24 measures 1.5 m x 2.25 m and is subjected to a centric load and a moment. If eB = 0.12 m, eL = 0.36 m, and the depth of the foundation is 0.8 m, determine the allowable load the foundation can carry. Use a factor of safety of 4. For the soil, we are told that unit weight γ = 17 kN/m3, friction angle Φ' = 35°, and cohesion c' = 0.
The foundation of the figure presents an eccentricity that goes in 2 directions, eb= 0.20, eL=0.35. Using the general Meyerhof bearing capacity equation and FS= 1.5, determine Qu(adm) that the foundation can support.
A strip footing foundation 1 m wide is constructed in the slope of a hill whose surface inclination is 20°. The soil in the hill is a dense sand, with a unit weight of 19 kN/m3 and an angle of internal friction of 40°. Assume that the D/B ratio is about 1. Applying a factor of safety of 3, determine the wall loading the foundation can carry, per meter of footing length.
The plan of a mat foundation is shown in Figure 1. Calculate the soil pressure at points A, B, C, D, E and F. (Note: All column sections are planned to be 450mmX450mm). Determine factor of safety of the Mat.
For the following cases, determine the allowable gross vertical load-bearing capacity of the foundation. Use Terzaghi’s equation and assume general shear failure in soil. Use FS=4. B = 1.5 m Df = 1.2 m Φ' = 35° c' = 0 specific weight of the soil = 17.8 kN/m^3 Foundation Type = Continuous
Determine the maximum column load that can be applied on a 1.5 m × 1.5 m square foundation placed at a depth of 1.0 m within a soil, where γ = 19.0 kN/m3, c′ = 10 kN/m2, and ф′ = 24°. Allow a factor of safety of 3.0.
Consider a continuous foundation of width B = 1.4 m on a sand deposit with c = 0, = 38, and = 17.5 kN/m3. The foundation is subjected to an eccentrically inclined load (see Figure 6.33). Given: load eccentricity e = 0.15 m, Df = 1 m, and load inclination = 18. Estimate the failure load Qu(ei) per unit length of the foundation a. for a partially compensated type of loading [Eq. (6.89)] b. for a reinforced type of loading [Eq. (6.90)]