A square foundation is 1.5m x 1.5m in plan. The soil supporting the foundation has a friction angle '=20 and c'=15.2 kN/m². The unit weight of soil is y=17.8 kN/m². Determine the allowable gross load on the foundation with a factor of safety F,=4. Assume that the depth of the foundation D=1m and the general shear failure occur in the soils mass.

A square foundation is 1.5m x 1.5m in plan. The soil supporting the foundation has a friction angle '=20 and c'=15.2 kN/m². The unit weight of soil is y=17.8 kN/m². Determine the allowable gross load on the foundation with a factor of safety F,=4. Assume that the depth of the foundation D=1m and the general shear failure occur in the soils mass.

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter16: Shallow Foundations-bearing Capacity

Section: Chapter Questions

Problem 16.5P: A square column foundation has to carry a gross allowable load of 1805 kN (FS = 3). Given: Df = 1.5...

See similar textbooks

Similar questions

A circular foundation of 1.5 m diameter is constructed in a sand deposit. Given: Df =1 5 m, soil friction angle Ø =35o and soil unit weight γ =17 4kN/m3. Estimate the ultimate uplift capacity of the foundation.
Consider a continuous foundation of width B = 1.4 m on a sand deposit with c' = 0, Φ' = 38° and γ = 17.5 kN/m3. The foundation is subjected to an eccentrically inclined load (see Figure 4.31). Given: load eccentricity e = 0.15 m, Df = 1 m, and load inclination β = 18°. Estimate the failure load Qu(ei) per unit length of the foundation a. for a partially compensated type of loading [Eq. (4.85)] b. for a reinforced type of loading [Eq. (4.86)]
Consider a continuous foundation of width B = 1.4 m on a sand deposit with c = 0, = 38, and = 17.5 kN/m3. The foundation is subjected to an eccentrically inclined load (see Figure 6.33). Given: load eccentricity e = 0.15 m, Df = 1 m, and load inclination = 18. Estimate the failure load Qu(ei) per unit length of the foundation a. for a partially compensated type of loading [Eq. (6.89)] b. for a reinforced type of loading [Eq. (6.90)]
A 2.0 m wide strip foundation is placed in sand at 1.0 m depth. The properties of the sand are: γ = 19.5 kN/m3, c′ = 0, and ф′ = 34°. Determine the maximum wall load that the foundation can carry, with a factor of safety of 3.0, using Terzaghi’s original bearing capacity equation with his bearing capacity factors, and Meyerhof’s general bearing capacity equation with shape, depth, and inclination factors from Table 6.3.
Calculate the stress at the end of the clay stratum σ, and the increment Δσ that the footing produces a load P = 1200 KN, at points A and B C Use Boussinesq´s equation.
A continuous foundation with a width of 1 m is located on a slope made of clay soil. Refer to Figure 5.19 and let Df = 1 m, H = 4 m, b = 2 m, γ = 16.8 kN/m3, c = cu = 68 kN/m2, Φ= 0, and β = 60°.a. Determine the allowable bearing capacity of the foundation. Let FS = 3.b. Plot a graph of the ultimate bearing capacity qu if b is changed from 0 to 6 m.
The shallow foundation shown in Figure 4.24 measures 1.5 m x 2.25 m and is subjected to a centric load and a moment. If eB = 0.12 m, eL = 0.36 m, and the depth of the foundation is 0.8 m, determine the allowable load the foundation can carry. Use a factor of safety of 4. For the soil, we are told that unit weight γ = 17 kN/m3, friction angle Φ' = 35°, and cohesion c' = 0.
The foundation of the figure presents an eccentricity that goes in 2 directions, eb= 0.20, eL=0.35. Using the general Meyerhof bearing capacity equation and FS= 1.5, determine Qu(adm) that the foundation can support.
1. A rectangular foundation is 3 m x 4m in plan is acted upon by a inclined force of 50 kN at an angle of 15° to the vertical. The soil supporting the foundation has a friction angle of '=27° and c'=22 kN/m². The unit weight of soil is 18kN/m³. Determine the allowable gross load on the foundation with a factor of safety of 3. Assume that the depth of the foundation is 2 m, depth of water table 3.5 m and that local shear failure occurs in the soil. Use general Bearing Capacity equation and Mayerhoff, Hansen's and IS 6403-1981 bearing capacity factors separately to calculate bearing capacity. State your assumption in case any.
A 2.0 m wide square foundation is placed at 0.5 m depth ina saturated clay where cu= 40 kN/m2 and delta=19.0 kN/m3 .There is a very stiff stratum present at 1.0 m below the foundation. Determine the ultimate bearing capacity using Buisman’s (1940) equation.
The shallow foundation shown in Figure 6.25 measures 1.5 m × 2.25 m and is subjected to a centric load and a moment. If eB = 0.12 m, eL = 0.36 m, and the depth of the foundation is 0.8 m, determine the allowable load the foundation can carry. Use a factor of safety of 4. For the soil, we are told that unit weight γ = 17 kN/m3, friction angle ф′ = 35°, and cohesion c′ = 0.
It is proposed to place a 9 ft 9 ft foundation at 6 ft depth in a sandy soil, where the average N60 is 25 and the unit weight is 115.0 lb/ft3. Using Meyerhofs expressions presented in Section 9.6, estimate the allowable net pressure that would give 1.2 in. of settlement.