2. A sheet of copper is stretched biaxially in the xy-plane. If the strains in the sheet are 0.40 x 10 - in the x direction and 0.30 x 10 in the y direction, determine the stresses in the x and y direction. Also, determine the strain in the z direction. The modulus of elastic and Poisson's ratio of copper is 110 GPa and 0.35 respectively. 3. If the copper in no. 2 is changed into steel with the same dimensions and with a modulus of elasticity of 200 GPa and a Poisson's ratio of 0.30, determine the strains in all direction if the same stresses in no. 2 where to be applied to the steel. €, E,

2. A sheet of copper is stretched biaxially in the xy-plane. If the strains in the sheet are 0.40 x 10 - in the x direction and 0.30 x 10 in the y direction, determine the stresses in the x and y direction. Also, determine the strain in the z direction. The modulus of elastic and Poisson's ratio of copper is 110 GPa and 0.35 respectively. 3. If the copper in no. 2 is changed into steel with the same dimensions and with a modulus of elasticity of 200 GPa and a Poisson's ratio of 0.30, determine the strains in all direction if the same stresses in no. 2 where to be applied to the steel. €, E,

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter7: Analysis Of Stress And Strain

Section: Chapter Questions

Problem 7.5.1P: 1 A rectangular steel plate with thickness t = 5/8 in. is subjected to uniform normal stresses a and...

See similar textbooks

Similar questions

An element of material in plain strain is subjected to strains x = 0.0015, , y . = -0.0002, and xy = 0.0003. (a) Determine the strains for an element oriented at an angle = 20°. (b) Determine the principal strains of the element. Confirm the solution using Mohr’s circle for plane strain.
A thin square plate in biaxial stress is subjected to stresses ?? and ??., as shown in part a of the figure. The width of the plate is h = 12.0 in. Measurements show that the normal strains in the x and v directions are s = 427 × 10-6 and s = 113 × l0-6, respectively. With reference to part b of the figure. which shows a Iwo-dimensional view of the plate. determine the following quantities. (a) The increase .d in the length of diagonal Oil. (b) The change . in the angle between diagonal Oti and the x axis, (c) The shear strain y associated with diagonals Oil and cf(that is. find the decrease in angle ced).
A solid spherical ball of magnesium alloy (E = 6.5 × l0-6 psi, v = 0.35) is lowered into the ocean to a depth of 8000 ft. The diameter of the ball is 9.0 in. (a) Determine the decrease ?d in diameter, the decrease, ?V in volume, and the strain energy U of the ball. (b) At what depth will the volume change be equal to 0.0324% of the original volume?
An element of material in plain strain has the following strains: x = 0.001 and y = 0.0015. (a) Determine the strains for an element oriented at an angle = 250. (b) Find the principal strains of the element. Confirm the solution using Mohr’s circle for plane strain.
An element of material in plain strain is subjected to shear strain xy = 0.0003. (a) Determine the strains for an element oriented at an angle = 30°. (b) Determine the principal strains of the clement. Confirm the solution using Mohr’s circle for plane strain.
An clement of material in plane strain (see figure) is subjected to strains ex= 480 × 10-6, Ey= 70 × l0-6, and yxy= 420 × l0-6. Determine the following quantities: (a) the strains for an element oriented at an angle 0 = 75°, (b) the principal strains, and (c) the maximum shear strains. Show the results on sketches of properly oriented elements.
1 A rectangular steel plate with thickness t = 5/8 in. is subjected to uniform normal stresses a and ., as shown in the figure. Strain gages A and B. oriented in the x and v directions. respectively, arc attached to the plate. The gage readings give normal strains = 0.00065 (elongation) and £. = 0.00040 (elongation). Knowing that E = 30 X 106 psi and v = 0.3, determine the stresses c7 and a, and the change .11 in the thickness of the plate.
A sheet of copper is stretched biaxially in the xy-plane. If the strains in the sheet are 0.40 x 10 -3 in thex direction and 0.30 x 10-3 in the y direction, determine the stresses in the x and y direction. Also,determine the strain in the z direction. The modulus of elastic and Poisson’s ratio of copper is 110GPa and 0.35 respectively.
A tri-axial state of stress, σx , σy, and σz ,exists in a steel machine part. For steel, E = 200GPa and ν = 0.3. Determine the normal strain in the x-direction if σx = 100MPa, σy = 35MPa, σz = 70MPa. Determine the dilatation. Determine the modulus of rigidity.
2. A rectangular aluminum block having a dimension of (from origin) for the +250 mm along the Y-axis, -100 mm along the X-axis, and -175 mm along the Z-axis. The applied forces are (at both sides) 375 kN tension along the X-Axis, 200 kN tension along the Z-axis, and 150 kN compression along the Y-axis. If the poisson’s ratio is 0.28, and E = 76 GPa, determine the strain and deformation along X, Y, and Z – axis.
Consider the given loading on a pipe. A rectangular rosette (45 degree apart) is placed on a point (K) which is located on the half length of the pipe as shown below. Note that the second gage (b) is parallel to the z-axis . When the load is applied, the strain gages read εa=80 µS, εb=60 µS, εc=20 µS. The pipe have an elastic modulus of Est=201 GPa. a. Determine the in-plane principal strains and the principal strain directions for the given set of strains (Use Mohr circle)
2.Show that volumetric strain in a bar is equal to the sum of strains in three mutually perpendicular directions. 3. Explain the terms: (i) Modulus of elasticity (ii) Modulus of rigidity and (ii) Bulk modulus. 4. Derive the relationship between (i) Modulus of elasticity and modulus of rigidity (ii) Modulus of elasticity and bulk modulus