With complete and clear units/conversion factors please thank you. Kindly box answers please thank you 2. A Ste am power plant uses a Rankine cycle to poduce electricalpower. The boiler pressure is 2 Mp a and the temperature at theturbine inlet is 600 C. The intet pre ssureand the entropy is 0.8931 kJ/kg -k The turbine gives IuW OFwork to the generator. Find the dryness of the steam at turbineexit, wp, Qa, Qr, wt, Wnet, efficiency, SR, and mass Flowrate of steam :pumpis 0.025 MPa84. C65%0, 2, 0143 kJ/kg, 2749:56 kJ/kg, 1980-15 kJ/ kg, Re5.42 k)/kg763.41 kJ) kg , 27. 14 %. , 4.157 kg/ kWh, 1.3069 kg/s hot gasessteam generator4turbinecondenserpump31,

Answered: Image /qna-images/answer/8fb9cad8-bbd3-4fdd-9ce9-b179f4f2855b.jpg

2. A Ste am power plant uses a Rankine cycle to produce electrical power. The boiler pressure is 2 MPa and the temperature at the turbine inlet is 300 C. The and the entropy is 0.8931 kJ/ kg -k The turbine gives Iuw work to the ġenerator. Find the' dryness of the steam at turbine exit, wp, Qa, Qr, Wt, Whet, Flow rate oF steam · pump intet pre ssure is 0-025 MPa efficiency, SR, and mass 84. 65°%. , 2,0143 kJ/kg, 2749:56 kJ/kg, 1980-15 kJ/ kg, Res.42k)(kg 763.41 kJ/ kg , 27. 14 °% , 4.1i57 kg/ kWh, 1.3064 kg/s

2. A Ste am power plant uses a Rankine cycle to produce electrical power. The boiler pressure is 2 MPa and the temperature at the turbine inlet is 300 C. The and the entropy is 0.8931 kJ/ kg -k The turbine gives Iuw work to the ġenerator. Find the' dryness of the steam at turbine exit, wp, Qa, Qr, Wt, Whet, Flow rate oF steam · pump intet pre ssure is 0-025 MPa efficiency, SR, and mass 84. 65°%. , 2,0143 kJ/kg, 2749:56 kJ/kg, 1980-15 kJ/ kg, Res.42k)(kg 763.41 kJ/ kg , 27. 14 °% , 4.1i57 kg/ kWh, 1.3064 kg/s

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Steam at 6.2 MPa and 480°C is received by a regenerative engine. Extractions for feedwaterheating occurs at 3 MPa and again at. 1.4 MPa,with the remaining steam expanding to0.0065 MPa. For the ideal engine with a throttla flow of 54,500 kg/h, find the hourlyquantities of steam ex-tracted, the turbine work in kW, and the thermal efficiency. For an ideal cycle through the same states, calculate Q and e。
A Steam power plant uses a Rankine cycle to produce electrical power. The boiler pressure is 2 MPa and the temperature at the turbine inlet is 300C. The pump inlet pressure is 0.025 MPa and the entropy is 0.8931 kJ/kg-k. The turbine gives 1MW of work to the generator. Find the dryness of the steam at turbine exit, Wp, Qa, Qr, Wt, Wnet, efficiency, SR, and mass flow rate of steam. (84.65%, 2.0143 kJ/kg, 2749.56 kJ/kg, 1986.15 kJ/kg, 765.42 kJ/kg, 763.41 kJ/kg, 27.76%, 4.7157 kg/kWh, 1.3064 kg/s) -Draw the T-S diagram with properly labelled points and solve the problems. Show your COMPLETE solution - Use the Steam Table provided if necessary.
for a rankine cycle, steam at 5.25 MPa. 435 degree celcius expands to 0.036 MPa. For 10kg/s of steam, determine heat added, heat rejected, work of turbine, thermal efficiency
Steam at 5.2 MPa, 4000C expands in a Rankine turbine to 0.036MPa. For 136 kg/s of steam, determine the work, the thermal efficiency, and the steam rate (a) fot the cycle(b) for the turbine, (c) for an actual turbine with the same specifications, the brake steam rate is 4.80 kg/kwh ang the driven electric generator has an efficiency of 93%, Find brake thermal efficiency , brake engine efficiency, combined work, and quality or temperature of exhaust steam. Don't answer the given problem, just give me the schematic diagram and T-S diagram of the given problem
cycle is ideal rankine cyccle regenerative. vapor enterin turbine 7MPa 550celcius. firstly expanding to 0.8mpa and getting transferred to FWH works at 0.8mpa and then the steam thats left expanding through 2nd stage turbine to the condenser pressure of 10kpa. saturatedd liq exiting the open feedwater heater at 0.8mpa and water entering pump in phase of saturated liquid what is power output of this cyle? what is the thermal efficiency? what is heat transfer from condenser to environment?
A net of 2500 kW is needed from a gas turbine engine. Air enters the compressor section at 13.005kPag, 315K. The turbine sections receive the hot gas at 1905 K. Draw the (a) P-V and T-S diagrams. Find (b) air flowand, (c) thermal efficiency. (d) For the maximum work, what should be the temperature of the air leaving thecompressor. Consider rp = 11, k = 1.35 and R = 260.078 J/kgm-K.
In a reheat cycle steam at 550°C expands in an h.p. turbine till it is saturated vapour. It is reheated at constant pressure to 450°C and then expands in a I.p. turbine to 40°C. If the maximum moisture content at turbine exhaust is limited to 10%, find (a) the reheat pressure, (b) the boiler pressure, c) the net specific work output,plss give info as much as possible
the intake volume of an engine working on the carnot cycle is 42.5 m^3 while the voume after the volume of the compression process is 37.2 ft^3 if the working fluid is cold air. Find the cycle efficiency in %
An ideal reheat turbine with one stage of reheat receives steam at 8.0 MPa,480°C. Reheat pressure is 0.83 MPa and exhaust pressure is 0.007MPa. thework is 1559 KJ/kg and the thermal efficiency is 41.05%. find the temperature of steam leaving the re-heater.
An ideal reheat turbine with one stage of reheat receives steam at 8.0 MPa, 480 o C. Reheatpressure is 0.83 MPa and exhaust pressure is 0.007 MPa. The work is 1559 kJ/kg and the thermalefficiency is 41.05%. Find the temperature of steam leaving the reheater.
A dry and saturated steam supplied in a power plant is at 1500 kPa. Determine theefficiencies of Carnot and Rankine cycle if the pressure at the condenser is at 40 kPa,neglecting pump work.
A 300 MW steam power plant, according to the simple ideal Rankine cycle references Water vapor enters the turbine at a pressure of 10 MPa and a temperature of 500°C; 10 KPA expands to condenser pressure.Isanthropic of turbine and pumpaccording to the efficiency of 85%, the degree of dryness of steam at the turbine output, find the thermal efficiency of the cycle and the mass flow of water vapor circulating in the cycle.