200 N A block placed under the head , of the claw hammer as shown greatly facilitates the extraction of the nail . If the 200-N pull on the handle is required to pull the nail 200 mm calculate the tension T in the nail and the magnitude A of the force exerted by the hammer head on the block . The contacting surfaces at A are sufficiently rough to 45 mm prevent slipping ii cam

200 N A block placed under the head , of the claw hammer as shown greatly facilitates the extraction of the nail . If the 200-N pull on the handle is required to pull the nail 200 mm calculate the tension T in the nail and the magnitude A of the force exerted by the hammer head on the block . The contacting surfaces at A are sufficiently rough to 45 mm prevent slipping ii cam

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter4: Coplanar Equilibrium Analysis

Section: Chapter Questions

Problem 4.170RP: The 320-lb homogeneous spool is placed on the inclined surface. Determine the vertical force P that...

See similar textbooks

Similar questions

The woman is trying to move the crate of weight W by pulling on the rope at the angle to the horizontal. Find the smallest possible tension that would cause the crate to slide and the corresponding angle .
The man pushes the 120-lb homogeneous crate with the horizontal force P. Determine the largest distance h for which the crate will slide without tipping.
The force P applied to the brake handle enables the band brake to reduce the angular speed of a rotating drum. If the tensile strength of the band is 3800 lb, find the maximum safe value of P and the corresponding braking torque acting on the drum. Assume that the drum is rotating clockwise.
Find the tension T in the cable when the 180-N force is applied to the pedal at E. Neglect friction and the weights of the parts.
The 40-lb spool is suspended from the hanger GA and rests against a vertical wall. The center of gravity of the spool is at G and the weight of the hanger is negligible. The wire wound around the hub of the spool is extracted by pulling its end with the force P. If the coefficient of static friction between the spool and the wall is 0.25, determine the smallest P that will extract the wire.
If the input force to the compound lever is P = 30 lb, calculate the output force Q.
The homogeneous 240-lb bar is supported by a rough horizontal surface at A, a smooth vertical surface at B, and the cable BC. Draw the FBD of the bar and count the unknowns.
The uniform, 20-kg bar is placed between two vertical surfaces. Assuming sufficient friction at A to support the bar, find the magnitudes of the reactions at A and B.