3. A rectangular gate 1.4 m in base and 1.8 m high is placed on the face of the water reservoir, as shown in the figure. Its upper portion is hinged and the base is attached to a cylindrical buoy whose weight is 20 kg. The external diameter of the buoy is 2 m and the weight of the gate is 50 kg. The mechanism is such that the buoy will open the gate if water surface will rise higher than 4 m. What is the height of the buoy below the water surface? WATER SURPACE puoy GATE 4m hinged

3. A rectangular gate 1.4 m in base and 1.8 m high is placed on the face of the water reservoir, as shown in the figure. Its upper portion is hinged and the base is attached to a cylindrical buoy whose weight is 20 kg. The external diameter of the buoy is 2 m and the weight of the gate is 50 kg. The mechanism is such that the buoy will open the gate if water surface will rise higher than 4 m. What is the height of the buoy below the water surface? WATER SURPACE puoy GATE 4m hinged

Name: 3. A rectangular gate 1.4 m in base and 1.8 m high is placed on the f
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: 3. A rectangular gate 1.4 m in base and 1.8 m high is placed on the face of the waterreservoir, as shown in the figure. Its upper portion is hinged and the base is attached toa cylindrical buoy whose weight is 20 kg. The external diameter of the buo

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

One side of the container has a 03-m square door that is hinged at its top edge. If the container is filled with water, determine the smallest force F that must be applied to the bottom edge of the door to keep it closed.
A rectangular gate 1.4 m in base and 1.8 m high is placed on the face of the water reservoir, as shown in the figure. Its upper portion is hinged and the base is attached to a cylindrical buoy whose weight is 20 kg. The external diameter of the buoy is 2 m and the weight of the gate is 50 kg. The mechanism is such that the buoy will open the gate if water surface will rise higher than 4 m. What is the height of the buoy below the water surface?
A 4-m-long quarter-circular gate of radius 4 m and of negligible weight is hinged about its upper edge A, as shown in the figure. The gate controls the flow of water over the ledge at B, where the gate is pressed by a spring. Determine the minimum spring force (in N) required to keep the gate closed when the water level rises to A at the upper edge of the gate.
A triangular gate having horizontal base of 1.0m and an altitude of 1.5m is inclined 45° from the vertical with the vertex pointing upward. The vertex of the gate is 2.4m vertically below the surface of the water. What normal force , in KN, must be applied at the vertex of the gate to open it's hinged at the base?
EMERGENCY!!!! The cover in the figure is hinged at the center O and has a fixed width w = 5 m. The equation of the surface is x = y2 / a (a = 3 m), the depth of the water to the right of the lid (D = 4 m). If the weight of the lid is neglected, it is necessary to keep the lid in balance. Find the size of the force (Fa) required, as shown. Take the density of the water as 999 kg / m3.
Figure AB Cover rests on a flat surface. Cover 180 kg weight and 1.2 m wide. At what height is the water depth the lid won't open? find it. (glycerin density is 1260 kg/m3 , That density 1000 kg/m3 )
6-m-wide rectangular gate shown is hinged at B and leans against the floor at A making an angle of 45° with the horizontal The gate is to be opened from its lower edge by applying a normal force at its center. Determine the minimum force F required to open the water gate.
A 6-m-high, 5-m-wide rectangular plate blocks the end of a 5-m-deep freshwater channel, as shown in Fig. below. The plate is hinged about a horizontal axis along its upper edge through a point A and is restrained from opening by a fixed ridge at point B. Determine the force exerted on the plate by the ridge.
Please be clear with your solution. A Triangular gate having a horizontal base of 1.30 m and an altitude of 2 m is inclined 45o from the vertical with vertex pointing upward. The base of the gate is 2.70 m below the surface of oil (s = 0.80). What normal force must be applied at the vertex of the gate to open it? Show figure
A 6-m-high, 5-m-wide rectangular plate blocks the end of a 5-m-deep freshwater channel, as shown in Figure. The plate is hinged about a horizontal axis along its upper edge through a point A and is restrained from opening by a fixed ridge at point B.Determine the force exerted on the plate by the ridge.
Consider a cubical water tank with a side length of 4 m. The tank is half filled with water, and is open to the atmosphere. Now, a truck carrying this tank is accelerated at a rate of 7 m/s^2 on a flat road. The maximum vertical rise (in meters) of free surface of the water is? only HANDWRITTEN answer needed ( NOT TYPED)
A 4-m-long quarter-circular gate of radius 2 m and of negligible weight is hinged about its upper edge A. The gate controls the flow of water over the ledge at B, where the gate is pressed by a spring. Determine the minimum spring force required to keep the gate closed when the water level rises to A at the upper edge of the gate.