4. A 3-m-long and 1-m-wide rectangular gate AB is hinged at point A. The gage reads -110 mmHg while the right tank is filled -110 mmHg with oil. Determine the horizontal hydrostatic force at point B (FB) that is required to be applied to keep the gate Water closed. Assume that the density of water and oil are 1000 kg/m³ and 750 kg/m³, 8 m respectively. A Oil 3 m FB

4. A 3-m-long and 1-m-wide rectangular gate AB is hinged at point A. The gage reads -110 mmHg while the right tank is filled -110 mmHg with oil. Determine the horizontal hydrostatic force at point B (FB) that is required to be applied to keep the gate Water closed. Assume that the density of water and oil are 1000 kg/m³ and 750 kg/m³, 8 m respectively. A Oil 3 m FB

Name: 4. A 3-m-long and 1-m-wide rectangular gate AB is hinged at point A.
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: 4. A 3-m-long and 1-m-wide rectangular gate AB is hinged at point A. The gage reads-110 mmHg while the right tank is filled-110 mmHgwith oil. Determine the horizontalhydrostatic force at point B (FB) that isrequired to be applied to keep the gateWat

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

One side of the container has a 03-m square door that is hinged at its top edge. If the container is filled with water, determine the smallest force F that must be applied to the bottom edge of the door to keep it closed.
A 5-m-high, 8-m-wide rectangular gate is hinged at the top edge at A and is restrained by a fixed ridge at B. Determine the hydrostatic force exerted on the gate by the 9-m-high water and the location of the pressure center.
1. A rectangular plane surface is 2m wide and 3m deep. It lies in a vertical plane inthe water. Determine the total pressure and position of the center of pressure on theplane surface when its upper edge is horizontal (a)coincides with watersurface and (b) 2.5m below the free water surface
A long solid cylinder of radius 0.8 m hinged at point A is used as an automatic gate, When the water level reaches 5 m, the gate opens by turning about the hinge at point A. Determine (a) the hydrostatic force acting on the cylinder and its line of action when the gate opens and (b) the weight of the cylinder per m length of the cylinder.
A 3-m-diameter, 7-m-long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with the 7-m-long axis being horizontal. Determine the pressure difference between the front and back ends of the tank along a horizontal line when the truck (a) accelerates at 3 m/s2 and (b) decelerates at 4 m/s2.
The 5 m high and 6 m wide rectangular cover is hinged from point A on its upper edge and is prevented from opening with a fixed wedge at point B. Determine the hydrostatic force and center of pressure exerted on the cover by the 8 m high water. (ρ(water)=1000 kg/m^3 , g= 9.81 m/s^2)
A rectangular plane surface 1 m wide and 3 m deep lies in water in such a way that its plane makes an angle of 30 degrees with the free surface of water. Determine the position of the center of pressure from the free water surface when the upper edge of the plate is 2 meter below the free water surface.
A cylindrical tank 2m diameter and 4 m long, with its axis horizontal, is half filled with water and half filled with oil of density 880 kg/m3. Determine the location of the hydrostatic force from the top of the cylinder. Express your answer in two decimal place and in terms of m.
A gate which is hinged at O with a constant width of 5m and water depth of 4m to the right of the gate.determine the magnitude of hydrostatic force required to maintain the gate in equilibrium
The 100cm radius cylinder weighs 3.1 KN and rest on the bottom of a container which is 1.5 meter long. Oil and water are poured into the left and right portion of the container to the depth of 0.8m and 1.4m respectively. Find the magnitude of the horizontal and vertical components of the force which will keep the cylinder touching the container at B.
A rectangular parallelepiped tank measuring 40cm x 30cm x 20cm is filled with water. Determine the force acting on each face of the tank if (a) it is open at the top and (b) closed at the top.
An open tank 2 m x 4 m rectangular horizontal section has anegligible weight and contains water to a depth of 1.5 m. It is actedupon by an unbalanced force of 50 kN parallel to longer side so thatwater is about to spill. If the tank is closed and theacceleration is increased by 4 m/s ², determine the new unbalancedforce if the pressure on the surface is 30 kPa.