4. For a construction work, we have to prepare concrete at the site. The concrete is prepared by volume batching in the ratio 1: F: C with a water cement ratio of R. If the dimensions of the slab in which the concrete is to be poured is Length= Lx m Width Ly m and Thickness = Lz m, how much volume of cement, fine and coarse aggregates and water to be taken? (Assume no bulking of materials while considering the volume. Take the volume of water in addition to the normal volume of other ingredients) M1 M2 M3 M4 P 566.5 B 31.33 3.9 5.8 6.61 5.41 Lz 0.4 FL 1 C 4 R 0.37 W 310 Lx 3.45 Ly 0.2

4. For a construction work, we have to prepare concrete at the site. The concrete is prepared by volume batching in the ratio 1: F: C with a water cement ratio of R. If the dimensions of the slab in which the concrete is to be poured is Length= Lx m Width Ly m and Thickness = Lz m, how much volume of cement, fine and coarse aggregates and water to be taken? (Assume no bulking of materials while considering the volume. Take the volume of water in addition to the normal volume of other ingredients) M1 M2 M3 M4 P 566.5 B 31.33 3.9 5.8 6.61 5.41 Lz 0.4 FL 1 C 4 R 0.37 W 310 Lx 3.45 Ly 0.2

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

d) How many bags of cement is needed if Class B 1:3 Mixture is required? WF=3% No. of 40kg bagse) Find the volume required for the fine aggregate if WF sand = 15%, in cubic metersf) How many pieces of 10mm diameter x 6 meters long rebar must be ordered? In piecesg) What will be the total mass of the reinforcing steel bars, in kilogram? In kilograms
A batch of concrete is composed of 200 lbm fine aggregate, 350 lbm coarse aggregate, 94 lbm cement, and 5 gallons of water. The specific gravity of the fine and coarse aggregate is 2.65, and that of the cement as 3.10. What is the specific weight of concrete in lb/ft³?
The design of a concrete mix requires 1173 kg/m3of gravel in dry condition,582 kg/m3of sand in dry condition, and 157 kg/m3of free water. The gravelavailable at the job site has a moisture content of 0.8% and absorption of1.5%, and the available sand has a moisture content of 1.1% and absorptionof 1.3%. What are the masses of gravel, sand, and water per cubic meter thatshould be used at the job site?
You want to increase the sustainability of a concrete mixture by replacing 35% of the portland cement by mass with a locally available natural pozzolan that can be used in place of ordinary portland cement (CEMPOZZ). The quantity of cement in the concrete mixture is 620 lb/yd3. You can assume that the specific gravity of portland cement and CEMPOZZ are the same for this problem. What is the quantity of CEMPOZZ for the mixture? Round to the nearest whole number and do not include units when entering your answer.
A batch of concrete consisted of 200 lbs fine aggregate (sand), 400 lbs coarse aggregate(gravel), 95 lbs cement, and 5 gallons of water. The relative density of the sand and gravel may be taken as 0.65 and that the cement as 3.10 What was the total volume ofconcrete produced? FULL solution please thank u
Discuss how the following affects the strength ofconcrete?a) Cement brandb) Cement– water ratioc) Aggregatesphysical appearanced) Transportationof cemente) Cement,water, sand and gravel proporti
A box measuring 50 cm x 50 cm x 50 cm is filled to the top with dry coarse aggregate of mass 187.5 kg. The water absorption and specific gravity of the aggregate are 0.5% and 2.5, respectively. The maximum quantity of water (in kg, round off to 2 decimal places) required to fill the box completely is bris
Calculate the slump of fresh concrete mix if you know: 1. W/C =0.47 2. Sand = 648 Kg/m3. 3. Gravel = 1056 Kg/m?. 4. Dry rodded mass of coarse aggregate is 1650 Kg/m?.
what is the requirement volume of fine aggregates (s.g. = 2..4) if the mass nedded for the concrete mix is 850 kg?
A contractor needs 403 m3 of aggregate material for a highway construction project. The required dryunit weight of the compacted fill is 20.82 kN/m3. The aggregate material is available at a local supplyyard and is sold by measuring in tons and not by volume. The moisture content of the stock is 7%. Thecost of the aggregate material per ton is 60.B.1.1 Determine the amount of water present in the aggregate stock of the local supplyyard.B.1.2 Determine the amount of aggregate material the contractor should purchase in tonsto have exactly the correct volume of compacted material.B.1.3 Estimate the total cost the contractor has to bear for the purchase of the material.
Design a concrete mix for the following performances and ingredients:• Characteristic compressive strength 50 N/mm2 at 7 days• Defective rate 1 %• Previous control data: standard deviation 5 N/mm2• Cement: class 52.5• Slump required, 30-60 mm• Maximum cement content 550 kg/m3• Coarse aggregate: Crushed single sized 10 mm• Fine aggregate: Uncrushed with 45% passing 600 μm sieve• Relative density of aggregate : 2.7 (assumed)• Volume of trial mix : 0.08 m3Note: the constant k used to find the margin, which is in turn used to determine the target compressive strength is as shown the table below: k for 10 % defectives = 1.28 k for 5% defectives = 1.64 k for 2.5% defectives= 1.96 k for 1% defectives= 2.33
Compute for the concrete mix proportion for a 6" diameter concrete cylinder mold with 12" height and 6"x6"x21" concrete beam mold Slump = 25mm to 50mm fc' = 3000psi at 28 days Maximum size of Coarse Aggregates (gravel) = 3/4" Unit weight of Coarse aggregate= 1651 kg/m³ Cement Type I Specific Gravity=3.15 Specific Gravity for Coarse Aggregates=2.77 Specific Gravity for Fine Aggregate=2.61 Fineness Modulus (FM)=2.69 Interpolate values that are not present/exact in each table hint: compute for the mix proportion of 1cubic meter of concrete after getting the mix proportions relate it to the volume of the structure above (concrete cylinder and concrete beam) to get the batch weights of the materials.