4-6 _4. The electric susceptibility of paper with dielectric constant of 2._5. Two capacitors having capacitances 20 µF and 40 µF areconnected in series across a 60 V battery. Calculate the energy stored in the 20 µFcapacitor._6. In a parallel plate capacitor of capacitance C the magnitude ofelectric field is E. If a dielectric slab with dielectric constant = 7 is introduced to fillcapacitor completely, the magnitude of electric field will become what?

In this question we will find electric susceptibility , energy stored in series connected…

4. The electric susceptibility of paper with dielectric constant of 2. 5. Two capacitors having capacitances 20 uF and 40 uF are connected in series across a 60 V battery. Calculate the energy stored in the 20 uF capacitor. _6. In a parallel plate capacitor of capacitance C the magnitude of electric field is E. If a dielectric slab with dielectric constant = 7 is introduced to fill canacitor completely the magnitude of electric field will become what?

4. The electric susceptibility of paper with dielectric constant of 2. 5. Two capacitors having capacitances 20 uF and 40 uF are connected in series across a 60 V battery. Calculate the energy stored in the 20 uF capacitor. _6. In a parallel plate capacitor of capacitance C the magnitude of electric field is E. If a dielectric slab with dielectric constant = 7 is introduced to fill canacitor completely the magnitude of electric field will become what?

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter19: Capacitors

Section: Chapter Questions

Problem 3RQ: A capacitor uses air as a dielectric and has a capacitance of 3 F. A dielectric material is inserted...

See similar textbooks

Similar questions

A capacitor uses air as a dielectric and has a capacitance of 3 F. A dielectric material is inserted between the plates without changing the spacing, and the capacitance becomes 15 F. What is the dielectric constant of this material?
Three capacitors having capacitance values of 20F,40F, and 50F are connected in parallel to a 60 - Hz power line. An ammeter indicates a circuit current of 8.6 amperes. How much current is flowing through the 40F capacitor?
4. In what form is the energy of a capacitor stored?
A capacitor is made from two flat parallel plates placed 2 mm apart, .and its capacitance at vacuum is 10-12- F , if 200 volt applied in between then a Dielectric material was entered and its Dielectric constant Is 49 , Calculate : a) the new value of capacitance after the entrance of the Dielectric b) what is the value of charge on Dielectric material surface c) the polarization p of the Dielectric material d) calculate the displacement and the field inside the Dielectric
A paper dielectric plate capacitor is to be experimentally tested. The metal plates and the paper material between said plates are all 20 cm in radius and subjected to 10V dc in the test. How much is the capacitance does this capacitor have in picofarads (pF), if the paper material between plates used is 2 cm thick? Input answer in 4 decimal places and in pF. Note: Relative permittivity of the paper ( εr ) : 0.4225
A parallel-plate capacitor using a dielectric material having an Pr of 2.2 has a plate spacing of 2 mm (0.08 in.). If another material having a dielectric constant of 3.7 is used and the capacitance is to be unchanged, what must the new spacing be between the plates?
A ceramic capacitor is to be constructed to have a capacitance of 0.01µF and to have a steady working potential of 2.5 kV maximum. Allowing a safe value of field stress of 10 MV/m, determine (a) the required thickness of the ceramic dielectric, (b) the area of plate required if the relative permittivity of the ceramic is 10, and (c) the maximum energy stored by the capacitor.
When an ac potential of 1000 V is applied at a frequency of 1 MHz, a parallel-plate capacitor with dimensions of 38 mm by 65 mm and a plate spacing of 1.3 mm must have a minimum capacitance of 70 pF. Which of the materials listed in Table 2 might be a good fit? Why?
Calculate the gravimetric capacitance of a carbon based electrode with an aqueous electrolyte solution. Assume the surface area of the carbon electrode is 1200 m2/g, and the relative static permittivity of the aqueous electrolyte solution is 80. The permittivity of free space is 8.85 × 10−12 F/m. Indicate any other assumptions you have to make.
Research and explain the following topics and cite examples oneach topics 1.) Capacitance of a Two parallel-plate capacitor with uniform dielectric medium.2.) Capacitance of an “n” parallel-plate capacitor having the same type of dielectric material and thickness of dielectric uniform dielectric medium.3.) Capacitance of an “n” parallel-plate capacitor having the different dielectric material and thickness of dielectric uniform dielectric medium.4.) Capacitance of a Two parallel-plate capacitor with a medium partly air.5.) Capacitance of a coaxial cable (Farad per meter).
The two parallel plates of capacitor, spaced at 1 mm apart both of them carries charges of 80 nC. Calculate the capacitance value, if the sides of square plate is 5 cm?
17.Derive the equation that links voltage,charge and capacitance.