4. The figure shows a riveted lap joint with cover plates connecting two steel plates. Each rivet has diameter of 12 mm and the thickness of each steel plate is 15 mm. (a) Compute the shear stress (MPa) in each rivet due to a force of 10.2 kN applied to the plates. (b) If the bearing stress in the steel plates is limited to 40 MPa, what is the allowable load P (kN)? (c) If the width of the steel plates is 100 mm what is the allowable load P (kN) for a limited normal stress of 20 MPa?

4. The figure shows a riveted lap joint with cover plates connecting two steel plates. Each rivet has diameter of 12 mm and the thickness of each steel plate is 15 mm. (a) Compute the shear stress (MPa) in each rivet due to a force of 10.2 kN applied to the plates. (b) If the bearing stress in the steel plates is limited to 40 MPa, what is the allowable load P (kN)? (c) If the width of the steel plates is 100 mm what is the allowable load P (kN) for a limited normal stress of 20 MPa?

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter8: Natural Convection

Section: Chapter Questions

Problem 8.22P

See similar textbooks

Similar questions

11.31 A large slab of steel 0.1 m thick contains a 0.1 -m-di- ameter circular hole whose axis is normal to the surface. Considering the sides of the hole to be black, specify the rate of radiative heat loss from the hole. The plate is at 811 K, and the surroundings are at 300 K.
1.26 Repeat Problem 1.25 but assume that the surface of the storage vessel has an absorbance (equal to the emittance) of 0.1. Then determine the rate of evaporation of the liquid oxygen in kilograms per second and pounds per hour, assuming that convection can be neglected. The heat of vaporization of oxygen at –183°C is .
The last portion asks you for "net radiant heat flux to the surface", meaning that positive net radiative heat flux means in and negative net radiative heat flux means out. This is opposite the typical sign convention - be aware of this
WHAT IS RADIATOR? how that system works; what processes are involved in its processes; and what are its benefits to modern society.
Calculate the view factor FBA for the following shape. The radii for the hollow circle, circle A and circle B are 8m, 5m, and10m, respectively. Vertical distance is 15m. circle A radii : 8m , 5m circle B radius : 10m vertical distance : 15m
A right circular cylinder has a height of 1 m and diameter of 75 cm. Find the view factor for the cylindrical to the base.
Determine the view factors fusand fo between the rectangular surtaces shown in Figure
Calculate the view factor FBA for the following shape. The radii for the hollow circle, circle A and circle B are 8m, 5m, and10m, respectively. Vertical distance is 15m. circle A radii : 8m , 10m circle B radius : 15m vertical distance : 15m because coaxial parallel disks
Need detailed Solution ,Previous One not enough. 1) For two surfaces, labelled 1 and 2, the view factor F_12 is 0.4. Surface 2 has twice the area of surface 1, what is the view factor from surface 2 to surface 1?
Two circular plates of radii r1= 4 cm and r2 = 2 cm are (9) cm apart. Find view factorF21.
Only one question: i- Determine the total emissive power of the surface if the surface is at K?
Two square plates of equal side (10) cm are 15 cm apart. Find view factor F12.