7. The Speed of DC motors can be controlled by varying.by the motor is ... by the torque required from the load.5. The frequency of magnetic reversal (f) is given by..10. When the series field assists the shunt field, generator is said to be.in series with field resistance to control the flux, hence the speed.6. The commercial or overall efficiency (Nc) in a DC generator is given as.4. The main function of the commutator in the DC machine is to ....3. In a DC motor, the mechanical power available at the shaft is known as.1. According to Faraday's Law of Electromagnetic Induction, an induced emf (eind ...).8. The actual torque available at the shaft for doing useful mechanical work is known as ......9. When a DC motor is rotating at constant speed (i.e., steady state), the torque producedb) Fill in the blanks.2. The Stray Losses referring to .... *... by using an external resistance.......**...... Wound.

1). According to Faradays law of electromagnetic induction the induced emf is given by Eind = -N ×…

5. The frequency of magnetic reversal (f) is given by.. 3. In a DC motor, the mechanical power available at the shaft is known as ...... 1. According to Faraday's Law of Electromagnetic Induction, an induced emf (eind = ...). rrial or overall efficiency (ncl in 4. The main function of the commutator in the DC machine is to . b) Fill in the blanks. 2. The Stray Losses referring to ...

5. The frequency of magnetic reversal (f) is given by.. 3. In a DC motor, the mechanical power available at the shaft is known as ...... 1. According to Faraday's Law of Electromagnetic Induction, an induced emf (eind = ...). rrial or overall efficiency (ncl in 4. The main function of the commutator in the DC machine is to . b) Fill in the blanks. 2. The Stray Losses referring to ...

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

a. Qualitatively describe the magnetic field set up in the air gap of a four-pole three-phase induction motor by the currents in the stator windings. b. Give an equation for the field intensity as a function of angular position around the gap and time, defining the terms in your equation.
The air-gap flux density of a two-pole induction motor is given by B=Bm cos(ωt−θ)where Bm is the peak flux density, θ is the angular displacement around the air gap, and we have assumed clockwise rotation. Give the corresponding expression for the flux density of a four-pole induction motor; of a six-pole induction motor.
IV. What are the various losses in an induction motor? On what actors do they depend?
A 50 kW, 220 V, dc shunt generators has an armature resistance including brushes of 0.026 ohms. If the shunt field resistance is 52 Ω. Find the induced emf at rated load.
What is Equation to find Slip, Output horse power, Torque, Stator current, p.f, Efficiency, From this result and we have Frequency and poles this result from load test of an induction motor
The permanent magnet machines (PMM) known as "Brushless Permanent Magnet Motors", "Brushless DC Motors" and as "Permanent Magnet Synchronous Motors", are they meant the same thing? If there a difference, then what is it? Explain that clearly and in details.
The armature of a 6-pole separately excited dc generator is triplex wave wound with 534 conductors. This machine delivers power to the load at 200V while being driven at 900rpm. At this load, the armature circuit dissipates 640W. If the flux of this generator is 180-mWb, determine the kW rating of the load served. Assume a total brush drop of 2V.
A long shunt compound generator delivers 100 A at 250 V. The armature, shunt field and series field resistances are 0.02 Ohms, 50 Ohms and 0.05 Ohms respectively. If the Break Horse Power (BHP) or the power developed by the shaft torque of the driving engine is 40, determine the stray loss.
A DC shunt generator has a full load output of 10kW at a terminal voltage of 240V. The armature and the shunt field winding resistances are 0.6 and 160 ohms respectively. The sum of the mechanical and core-losses is 500W. calculate the power required in kW at the driving shaft at full-load, and the corresponding efficiency and voltage regulation
[1] On an energy point of view, discuss why is it advantageous to run induction motors in star mode when the load less than 50%?
base on below mentioned Comparison of the performance indexes discuss and advice best induction motor.
- A separately excited 4 - pole, 900 rpm wave wound dc generator has an induced emf of 240V at rated speed and rated field current. When connected to a load, the terminal voltage is observed to be 200V. If the armature resistance is 0.2 Ω and the flux per pole is 10 m Wb, compute the armature current and the number of conductors