5. You are working in an engineering workshop. Towards the end of your shift, you observe another worker disposing of old machine oil directly into the gutter in the street. This method of disposal is incorrect as the used machine oil A. should not be emptied into the gutter until it rains. B. should have been poured directly into a drain instead. C. is an environmental hazard and should be stored in a waste container. D. must first have water added to it, then it can be poured into the gutter. 6. In most workplaces, employees must wear PPE. What does PPE stand for? A. proactive personal equipment B. personal protective equipment C. protective plasticised equipment D. proper protective equipment

5. You are working in an engineering workshop. Towards the end of your shift, you observe another worker disposing of old machine oil directly into the gutter in the street. This method of disposal is incorrect as the used machine oil A. should not be emptied into the gutter until it rains. B. should have been poured directly into a drain instead. C. is an environmental hazard and should be stored in a waste container. D. must first have water added to it, then it can be poured into the gutter. 6. In most workplaces, employees must wear PPE. What does PPE stand for? A. proactive personal equipment B. personal protective equipment C. protective plasticised equipment D. proper protective equipment

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter35: Comfort And Psychrometrics

Section: Chapter Questions

Problem 14RQ: If the fresh-air requirements for the house in question 13 were to be 0.4 air changes per hour, how...

See similar textbooks

Similar questions

9. The ability to do work is referred to as __________10.Plant or animal materials which can be used as a fuel, are known as __________
Describe the effect of pressure on an enclosed volume of a gas.
If the fresh-air requirements for the house in question 13 were to be 0.4 air changes per hour, how much fresh air must be taken in per minute?
Ventilation: The plant must have adequate ventilation to prevent the buildup of oxygen gas, which can be flammable and cause potential hazards. Electrical equipment: All electrical equipment used in the plant must be designed for use in a hazardous environment. Structural requirements: The building must be designed to withstand the weight and pressure of the refrigeration and cryogenic systems, as well as the potential stresses caused by temperature fluctuations. Please elaborate it well, this is an indoor consideration when designing cryogenic plant. you can add more.
Determine a) heat b) work non flow c) work steady flow.
please include all steps [neglect energy added to the air]
It is the ability of a liquid to spread out.
The internal energy of a system has component/s _______. * choose.. Kinetic energy Potential Energy Solar Energy Stored Energy Thermal Energy
I am struggling with a, b,c,d
It takes 104 hours to install a heating system in an office building. Theinstallers have already worked 36 hours. How many more hours are neededto finish the installation?
Identify the main sources of environmental pollution in the village/town/city
1.a Injecting a gas (usually air or oxygen) at the bottom of a tank so that the turbulence caused by the rising gas bubbles serves to mix the liquid contents of the tank is called _________ mixing. b. The term ____________ encompasses the physical processes whereby the size of suspended particles increases as a result of particle cohesion following collisions brought about by the random thermal motion of fluid molecules and/or mixing of the bulk fluid containing the particles. c. Turbine and propeller type mechanical mixers used for rapid mixing of reagent chemicals have either -flow impellers with flat or curved blades located parallel to the axis of the drive shaft, or -flow impellers with blades making an angle of less than 90o with the drive shaft. d.Colloidal particles typically have a negative surface charge that attracts oppositely charged positive ions in the surrounding bulk solution. These so-called _______-ions are held at the particle surface through electrostatic and van…