6 CHEMICAL SUB Sectors *Basic/Commodity Chemicals *Speciality Chemicals *Fine Chemicals *Pharmaceutical *Consumer products *Agricultural Chemicals One of the six subsectors listed above, choose 2 chemical sub sectors and: A. give 3 examples of chemical products classified under the subsector, and B. list 2 applications for the chemical products.

6 CHEMICAL SUB Sectors Basic/Commodity Chemicals Speciality Chemicals Fine Chemicals Pharmaceutical Consumer products Agricultural Chemicals One of the six subsectors listed above, choose 2 chemical sub sectors and: A. give 3 examples of chemical products classified under the subsector, and B. list 2 applications for the chemical products.

Principles of Instrumental Analysis

7th Edition

ISBN:9781305577213

Author:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Publisher:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Chapter23: Potentiometry

Section: Chapter Questions

Problem 23.12QAP: What arc the advantages of microfabricated ISEs? Describe typical applications of this type of...

See similar textbooks

Similar questions

An aquifer contaminated with petroleum is found to have the following component concentrations at a particular site: benzene 158 ppm toluene 124 ppm ethylbenzene 91 ppm xylene 45 ppm n-heptadecane 161 ppm pristane 84 ppm Provide an estimate for the age of the spill at this site using (a) BTEX ratio and (b) nC17:Pr ratio. Show your calculations and use units throughout. Give proper s.f. for the answer.
The average copper grade of the ore is 0.7 %. The total pregnant solution flowrate from all the leach pads is 8 000 m3/hr, with an average concentration of 1.8 kg/m3, with the concentration of copper in the lixiviant that is irrigated onto the heap being 0.2 kg/m3 (ignore any solution or copper losses to the environment in these calculations). What is the average copper recovery for the process?
Please answer atleast 4 sub-parts. Thank you.
Q/ ture or false 1- The difference between wet and dry corrosion, in the first case it occurs in the presence of moisture and the second in its absence * 2- It is necessary to fix the names of the equipment on the illustrative curve of the industrial process * 3- The flow curves are classified according to the number of reactors and the mechanism of separation or non-separation of the products * 4- In the processes that involve the purification of raw materials and products, it is preferable to purify the raw materials by adsorption, while the products are purified by washing, stripping and absorption. 5- The amount of dissolved substances in well water differs greatly from surface water due to the difference in temperature. * 6- The biological waste has no significant effect on the efficiency of the flow, but rather its effect on the toxicity of the water used for industrial purposes. 7- Several methods are used to remove unacceptable odors from water, including chemical…
A liquid hydrogen (LH2) tank is a double-hulled tank composed of cold drawn and annealed 316 stainless steel, with the cryogenic liquid on the inside and vacuum in the annular space (the outer tank). A) What factors might lead to the failure of the LH2 tank? B) Associate each factor from part A with a failure mechanism. C) What can you do to prevent the LH2 tank from failing? What can you also do to prevent the release of flammable and explosive gas?
What arc the advantages of microfabricated ISEs? Describe typical applications of this type of sensor.
What is the (plastics production) in industrial chemical process, (and write a half-page summary of it in 12pt font, single-spaced). Explain what is produced, the chemical reaction(s) involved, why this process/product is important, and how an understanding of limiting reagents is important in optimizing this process. Use at least two sources of information. Provide URLs for all sources you use in your research. Chemical reactions discussed must be complete and balanced, including states.
1 Report on how to decrease the droplet evaporation time for liquidfuel combustion.
Hot mix asphalt (HMA) is commonly used in the construction of roadways in the United States at a rateestimated to be 500,000,000 tons/year. A typical upper layer (there may be as many as 5 layers ofdifferent thicknesses and compositions) of a high-volume highway is composed of crushed stone (alsoknown as crushed aggregate) and asphalt binder and is approximately 1.25 inches thick. The stone,which has a specific gravity of about 2.7, is mixed with asphalt binder (SG = 1.03) to form the HMAwith a composition of approximately 95 wt% aggregate and 5% asphalt. What is the volume ft3 of asphalt binder and weight (tons) of HMA required for the top layer of a 15-mile segment of interstatehighway with 5 lanes, each of which has a width of 12 ft?
liquid hydrogen (LH2) tank is a double-hulled tank composed of cold drawn and annealed 316 stainless steel, with the cryogenic liquid on the inside and vacuum in the annular space (the outer tank). The Yield Stress of 316 stainless steel is 45 MPa, the Ultimate compressive strength is 90 MPa, the elongation % is 30, Poisson's ratio is .3 and the CTE is 15.9 *10-6 C-1. A. If there are no relief valves and the vessel is new, if the cross-sectional area of the inner tank is 1 m2, determine the force necessary to cause the tank to rupture.
Separations of solids, liquids and gasses are required in nearly all chemical process. These processes often involve mass transfer between two phases. Mass transfer operation includes techniques such as distillation, gas absorption, dehumidification, adsorption, liquid extraction, leaching, membrane separation and other methods. Select any two methods: Task expected from student: a) Identify the process industries in Oman where these mass transfer operations are deployed and discuss their uses in process industry. b) Discuss the principle involved in these mass transfer operations.
Dd.36. With explanation please .....