6. A block of wood (sg = 0.78) floats in water with 600 cm³ above the water surface. What is the total volume of the wood in cm³? A. 2727.3 C. 2989.4 B. 2653.8 D. 3214.4 7. The Froude number of flow in a rectangular channel is 0.85. If the depth of flow is 1.3 m, the critical depth is: A. 0.95 m C. 1.22 m B. 1.08 m D. 1.17 m

6. A block of wood (sg = 0.78) floats in water with 600 cm³ above the water surface. What is the total volume of the wood in cm³? A. 2727.3 C. 2989.4 B. 2653.8 D. 3214.4 7. The Froude number of flow in a rectangular channel is 0.85. If the depth of flow is 1.3 m, the critical depth is: A. 0.95 m C. 1.22 m B. 1.08 m D. 1.17 m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The semicircular drainage pipe is filled with water. Determine the resultant horizontal and vertical force components that the water exerts on the side AB of the pipe per foot of pipe length; γw = 62.4 lb/ft3.
If the water surface elevation in reservoir B is 110 m, what must be the water surface elevation in reservoir A if a flow of 0.03 m3s is to occur in the cast-iron pipe? Use f = 0.021 for all pipes. Draw the HGL and the EGL, including changes in slope due to head loss. Neglect minor losses.
The bed of a corrugated channel, with Manning’s coeffcient n =0.019 s/m^1/3 drops 25 m every 1500 m. The channel has a semi-circular cross section with total width of W = 10 m (i.e. radius of the semi-circle is 5 m). 1. Given that the stream has a water depth of h = 2.5 m, find the flow rate in the stream 2. A concrete divider with the same Manning’s coeffcient was installed at the middle of the stream. Given that the total flow rate in the stream stays the same, would the water depth in the stream change as a result of the divider? If so, would it increase or decrease? Would the stream velocity change? If so, would it increase or decrease? You may assume the thickness of the divider to be negligible.
A rectangular channel 1 m wide, Chézy C = 60, S = 0.0064, carries 1 m/s. Determine the velocity.
Water flows in a wide channel at Fr=4.5 and y1 = 2.40 m. If the flow undergoes a hydraulic jump, calculate: y2
Determine the head loss in the "smooth" pipe in meters if its friction factor is 0.014. a.12.9517 b.39.5136 c.30.4889 d.99.9358 What gage pressure p1 in kPa, is needed to provide the given flow rate? a.1692 kPa b.1121 kPa c.1328 kPa d.1725 kPa
1. A 3.1 – m wide rectangular flume carries water at 5.60 m3/s. The bed slope is 0.00078 and n = 0.010. At a certain section, the depth is 92 cm. a. How far therefrom is the depth 80 cm? b. What is the slope of the egl? c. What is the headloss? 2. A rectangular channel 1.8 m wide conveys water at a depth of 1.2 m. a. What is the velocity of flow if it is laid on a slope of 0.002 and n= 0.012? b. What is the discharge if the channel slopes 0.1° and n = 0.016? Use Kutter’s formula for C. c. What is the velocity of flow if S = 0.000263 and f = 0.02?
Question-05:A trapezoidal notch having bottom width of 1.0 m is installed in a 2.0 m X 2.0 m rectangular channel. Solve fordischarge through the notch in cubic meter per minute if the depth of water flowing in the notch is 1.5 m. Takethe coefficient of discharge for the notch as 0.64.
*Civil engineering- Hydraulics *Use handwritten What are the most economical dimensions for a rectangular brick channel designed to carry 10 m3/s of water with a uniform flow? Use n= 0.015 and S=0. 001. Choices: A. b = 4.32 m, d= 2.15 m B. b = 3.28 m, d = 1.64 m C. b = 2.92 m, d = 1.47 m D. b = 3.86 m, d= 1.91 m Water flows in a trapezoidal channel and running full. If the channel has a discharge of 8.0 m^3/s, find the base width for the most effictent section. Use n= 0.012 and S = 0.0008. Choices: A. 2.66 m B. 2.33 m C. 1.77 m D. 1.53 m
If a triangle of height d and base a is vertical and submerged in liquid with its vertex a distance below the liquid surface, determine the depth to its center of pressure. What is the horizontal force acting on the triangle? Assume ? water = 9790 N/m3. f = depth to apex, 2m d = height of triangle, 1m a = width of triangle, 1m The horizontal force (N) acting on the triangle is:
Points A and B are 5km apart along a new 60cm diameter cast iron pipe carrying water. A is 9m higher than B. If the pressure at B is 140KPa greater than at A. f=0.019. Determine the head loss in meters. a. 5.27 b. 7.52 c. 2.75 d. 7.25
Water is flowing in a rectangular channel that has a width b=3 m. If the depth of flow y = 2 m and Froud Number NF=3.3, then the flow rate(Q) in the channel is